# packages

pkgId: a3cbbcfeb2d1e3fe9bdfd1426243b38852ca260f708c2404f0b6a34dc4125c09
name: perl-Crypt-Blowfish
arch: armv5tel
version: 2.10
epoch: 0
release: 8.el6
summary: XS Blowfish implementation for Perl
url: http://search.cpan.org/dist/Crypt-Blowfish/
rpm_license: Copyright only
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Crypt-Blowfish-2.10-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-Blowfish-2.10-8.el6.armv5tel.rpm
checksum_type: sha256
description:
  Crypt::Blowfish is an XS-based implementation of the Blowfish
  cryptography algorithm designed by Bruce Schneier. It's designed to
  take full advantage of Crypt::CBC when desired. Blowfish keys may be
  up to 448 bits (56 bytes) long.


pkgId: 546b7eef62f789e13214f7d75d717dc6534b60af6de71d2e63b8368d3cd7f094
name: perl-Crypt-CAST5_PP
arch: noarch
version: 1.04
epoch: 0
release: 4.el6
summary: CAST5 block cipher in pure Perl
url: http://search.cpan.org/dist/Crypt-CAST5_PP/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp13_alw002
rpm_sourcerpm: perl-Crypt-CAST5_PP-1.04-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-CAST5_PP-1.04-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides a pure Perl implementation of the CAST5 block cipher.
  CAST5 is also known as CAST-128. It is a product of the CAST design
  procedure developed by C. Adams and S. Tavares.


pkgId: f7404e7f6cdcc05e2edbbc04a5615a053c3605610054e4713c15cada13597c2e
name: perl-Crypt-CBC
arch: noarch
version: 2.29
epoch: 0
release: 3.el6
summary: Encrypt Data with Cipher Block Chaining Mode
url: http://search.cpan.org/dist/Crypt-CBC/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Crypt-CBC-2.29-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-CBC-2.29-3.el6.noarch.rpm
checksum_type: sha256
description:
  This is Crypt::CBC, a Perl-only implementation of the cryptographic
  cipher block chaining mode (CBC).  In combination with a block cipher
  such as Crypt::DES or Crypt::IDEA, you can encrypt and decrypt
  messages of arbitrarily long length.  The encrypted messages are
  compatible with the encryption format used by SSLeay.


pkgId: ab33bbc1f91192887405e98888fbedb88fef421acfe59eccc44f3720a3f47510
name: perl-Crypt-CipherSaber
arch: noarch
version: 1.00
epoch: 0
release: 2.el6
summary: Perl module implementing CipherSaber encryption
url: http://search.cpan.org/dist/Crypt-CipherSaber/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-Crypt-CipherSaber-1.00-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-CipherSaber-1.00-2.el6.noarch.rpm
checksum_type: sha256
description:
  The Crypt::CipherSaber module implements CipherSaber encryption, described
  at http://ciphersaber.gurus.com/. It is simple, fairly speedy, and
  relatively secure algorithm based on RC4.


pkgId: f18920eb84ad3a4e236236c18403fbc4a4401b043e36881aa7f70dd0f135cf28
name: perl-Crypt-DES_EDE3
arch: noarch
version: 0.01
epoch: 0
release: 8.el6
summary: Triple-DES EDE encryption/decryption module
url: http://search.cpan.org/dist/Crypt-DES_EDE3/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Crypt-DES_EDE3-0.01-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-DES_EDE3-0.01-8.el6.noarch.rpm
checksum_type: sha256
description:
  This is Crypt::DES_EDE3, a module implementing Triple-DES EDE
  (encrypt-decrypt-encrypt) encryption and decryption.


pkgId: 17a3b355a2a60804fd79f1948dacc2f0bb977a71b9cb74fe09051f350c219d5c
name: perl-Crypt-DH
arch: noarch
version: 0.06
epoch: 0
release: 11.el6
summary: Perl module implementing the Diffie-Hellman key exchange system
url: http://search.cpan.org/dist/Crypt-DH/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp11_alw002
rpm_sourcerpm: perl-Crypt-DH-0.06-11.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-DH-0.06-11.el6.noarch.rpm
checksum_type: sha256
description:
  Crypt::DH is a Perl implementation of the Diffie-Hellman key exchange system.
  Diffie-Hellman is an algorithm by which two parties can agree on a shared
  secret key, known only to them. The secret is negotiated over an insecure
  network without the two parties ever passing the actual shared secret, or their
  private keys, between them.


pkgId: 2283150030342c723834bd2096b04cd81bfee324cda814e848203b0a59a1720c
name: perl-Crypt-DSA
arch: noarch
version: 1.17
epoch: 0
release: 10.el6
summary: Perl module for DSA signatures and key generation
url: http://search.cpan.org/dist/Crypt-DSA/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Crypt-DSA-1.17-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-DSA-1.17-10.el6.noarch.rpm
checksum_type: sha256
description:
  Crypt::DSA is an implementation of the DSA (Digital Signature Algorithm)
  signature verification system. This package provides DSA signing, signature
  verification, and key generation.


pkgId: 61eaa1624ed31eb6b5d9878de6b02c1d1b83cf067d4947418916e9c2c9a4108f
name: perl-Crypt-ECB
arch: noarch
version: 1.45
epoch: 0
release: 1.el6
summary: Encrypt Data using ECB Mode
url: http://search.cpan.org/dist/Crypt-ECB/
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Crypt-ECB-1.45-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-ECB-1.45-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a Perl-only implementation of the ECB mode. In combination
  with a block cipher such as DES, IDEA or Blowfish, you can encrypt and
  decrypt messages of arbitrarily long length. Though for security reasons
  other modes than ECB such as CBC should be preferred. See textbooks on
  cryptography if you want to know why.


pkgId: 366114a67b45b3df9c9df3094f1da2de98e299c3085cf20134413468d3f958a3
name: perl-Crypt-Eksblowfish
arch: armv5tel
version: 0.009
epoch: 0
release: 5.el6
summary: Eksblowfish block cipher
url: http://search.cpan.org/dist/Crypt-Eksblowfish/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Crypt-Eksblowfish-0.009-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-Eksblowfish-0.009-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  An object of this type encapsulates a keyed instance of the Eksblowfish
  block cipher, ready to encrypt and decrypt.


pkgId: 91bdf3d7f04dc87e529f5cdd785ab2b2f6262bbbed6d113bf1186f1563708641
name: perl-Crypt-GeneratePassword
arch: noarch
version: 0.03
epoch: 0
release: 16.el6
summary: Generate secure random pronounceable passwords
url: http://search.cpan.org/dist/Crypt-GeneratePassword/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp11_alw002
rpm_sourcerpm: perl-Crypt-GeneratePassword-0.03-16.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-GeneratePassword-0.03-16.el6.noarch.rpm
checksum_type: sha256
description:
  Crypt::GeneratePassword generates random passwords that are (more or less)
  pronounceable. Unlike Crypt::RandPasswd, it doesn't use the FIPS-181 NIST
  standard, which is proven to be insecure. It does use a similar interface,
  so it should be a drop-in replacement in most cases.


pkgId: 86d66c44e439693540e4583eb0ef37580f27b0abf3123fef0f739a19e677c403
name: perl-Crypt-IDEA
arch: armv5tel
version: 1.10
epoch: 0
release: 5.el6
summary: Perl interface to IDEA block cipher
url: http://search.cpan.org/dist/Crypt-IDEA/
rpm_license: BSD with advertising
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Crypt-IDEA-1.10-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-IDEA-1.10-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  This perl extension is an implementation of the IDEA block cipher algorithm.
  The module implements the Crypt::BlockCipher interface.

  This implementation is copyright Systemics Ltd (http://www.systemics.com/).


pkgId: 524f091cfdc8d87894ec13df6b41aff3ba5795efbfbda751cd9053776fc2889c
name: perl-Crypt-PBKDF2
arch: noarch
version: 0.150900
epoch: 0
release: 1.el6
summary: PBKDF2 password hashing algorithm
url: http://search.cpan.org/dist/Crypt-PBKDF2/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Crypt-PBKDF2-0.150900-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-PBKDF2-0.150900-1.el6.noarch.rpm
checksum_type: sha256
description:
  PBKDF2 is a secure password hashing algorithm that uses the techniques of
  "key strengthening" to make the complexity of a brute-force attack
  arbitrarily high. PBKDF2 uses any other cryptographic hash or cipher (by
  convention, usually HMAC-SHA1, but Crypt::PBKDF2 is fully pluggable), and
  allows for an arbitrary number of iterations of the hashing function, and a
  nearly unlimited output hash size (up to 2**32 - 1 times the size of the
  output of the back-end hash). The hash is salted, as any password hash
  should be, and the salt may also be of arbitrary size.


pkgId: 5acd99a5489c685e4916947edcef1fdddb3e8cf8a3b60e5bd86adf39eb8fae2c
name: perl-Crypt-Primes
arch: noarch
version: 0.50
epoch: 0
release: 7.el6
summary: Provable prime number generator for cryptographic applications
url: http://search.cpan.org/dist/Crypt-Primes/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Crypt-Primes-0.50-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-Primes-0.50-7.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements Ueli Maurer's algorithm for generating large provable
  primes and secure parameters for public-key cryptosystems. The generated primes
  are almost uniformly distributed over the set of primes of the specified
  bitsize and expected time for generation is less than the time required for
  generating a pseudo-prime of the same size with Miller-Rabin tests. Detailed
  description and running time analysis of the algorithm can be found in Maurer's
  paper, "Fast Generation of Prime Numbers and Secure Public-Key Cryptographic
  Parameters" (1994).


pkgId: be3335dedd5e14bf2b5317474c0a7b0dc8a7e1d27781e302f1e4a8ee06a9b290
name: perl-Crypt-RC4
arch: noarch
version: 2.02
epoch: 0
release: 1.el6
summary: Perl implementation of the RC4 encryption algorithm
url: http://search.cpan.org/dist/Crypt-RC4/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Crypt-RC4-2.02-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-RC4-2.02-1.el6.noarch.rpm
checksum_type: sha256
description:
  A simple implementation of the RC4 algorithm, developed by RSA Security,
  Inc. Here is the description from RSA's website:

  RC4 is a stream cipher designed by Rivest for RSA Data Security (now RSA
  Security). It is a variable key-size stream cipher with byte-oriented
  operations. The algorithm is based on the use of a random permutation. Analysis
  shows that the period of the cipher is overwhelmingly likely to be greater than
  10100. Eight to sixteen machine operations are required per output byte, and
  the cipher can be expected to run very quickly in software. Independent analysts
  have scrutinized the algorithm and it is considered secure.


pkgId: e4f36cf144f0983da1d3adfe7ebf8d1ed7e0b4d4a68ef97324e7424f423efc0e
name: perl-Crypt-RC4-XS
arch: armv5tel
version: 0.02
epoch: 0
release: 2.el6
summary: Perl implementation of the RC4 encryption algorithm
url: http://search.cpan.org/dist/Crypt-RC4-XS/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Unspecified
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-Crypt-RC4-XS-0.02-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-RC4-XS-0.02-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module XS implementation of the RC4 algorithm, developed by RSA
  Security, Inc. Here is the description from Wikipedia website:

  In cryptography, RC4 (also known as ARC4 or ARCFOUR meaning Alleged RC4, see
  below) is the most widely-used software stream cipher and is used in popular
  protocols such as Secure Sockets Layer (SSL) (to protect Internet traffic)
  and WEP (to secure wireless networks). While remarkable for its simplicity
  and speed in software, RC4 is vulnerable to attacks when the beginning of the
  output keystream is not discarded, or a single keystream is used twice; some
  ways of using RC4 can lead to very insecure cryptosystems such as WEP.


pkgId: 1a76fe7b881b6384576803b6b3b2c5b732ae2016057b698296e7c33ea2ccd3c7
name: perl-Crypt-RSA
arch: noarch
version: 1.99
epoch: 0
release: 2.el6
summary: RSA public-key cryptosystem
url: http://search.cpan.org/dist/Crypt-RSA/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Crypt-RSA-1.99-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-RSA-1.99-2.el6.noarch.rpm
checksum_type: sha256
description:
  Crypt::RSA is a pure-perl, cleanroom implementation of the RSA public-key
  cryptosystem. It uses Math::Pari(3), a perl interface to the blazingly fast
  PARI library, for big integer arithmetic and number theoretic computations.

  Crypt::RSA provides arbitrary size key-pair generation, plaintext-aware
  encryption (OAEP) and digital signatures with appendix (PSS). For compatibility
  with SSLv3, RSAREF2, PGP and other applications that follow the PKCS #1 v1.5
  standard, it also provides PKCS #1 v1.5 encryption and signatures.


pkgId: 36efc6bfc974978f2cfe2be16668513b2aaacaa13140669ae5ef4dd6170911d6
name: perl-Crypt-Random
arch: noarch
version: 1.25
epoch: 0
release: 7.el6
summary: Cryptographically Secure, True Random Number Generator
url: http://search.cpan.org/dist/Crypt-Random/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Crypt-Random-1.25-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-Random-1.25-7.el6.noarch.rpm
checksum_type: sha256
description:
  Crypt::Random is an interface module to the /dev/random device found on most
  modern unix systems. It also interfaces with egd, a user space entropy
  gathering daemon, available for systems where /dev/random (or similar) devices
  are not available. When Math::Pari is installed, Crypt::Random can generate
  random integers of arbritary size of a given bitsize or in a specified
  interval.


pkgId: f06fe72e1379d760657320b498a5ecdd639daf9617651d813153f0a02b7aa427
name: perl-Crypt-Random-Seed
arch: noarch
version: 0.03
epoch: 0
release: 1.el6
summary: Simple method to get strong randomness
url: http://search.cpan.org/dist/Crypt-Random-Seed/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Crypt-Random-Seed-0.03-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-Random-Seed-0.03-1.el6.noarch.rpm
checksum_type: sha256
description:
  A simple mechanism to get strong randomness. The main purpose of this
  module is to provide a simple way to generate a seed for a PRNG such as
  Math::Random::ISAAC, for use in cryptographic key generation, or as the
  seed for an upstream module such as Bytes::Random::Secure. Flags for
  requiring non-blocking sources are allowed, as well as a very simple method
  for plugging in a source.


pkgId: fb472042780743b0716caebf3a5559da374cd61b6ef9221687d1cb4cf18f892e
name: perl-Crypt-Rijndael
arch: armv5tel
version: 1.09
epoch: 0
release: 2.el6
summary: Crypt::CBC compliant Rijndael encryption module
url: http://search.cpan.org/dist/Crypt-Rijndael/
rpm_license: LGPLv2+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Crypt-Rijndael-1.09-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-Rijndael-1.09-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module implements the Rijndael cipher, which has just been selected as
  the Advanced Encryption Standard.


pkgId: 0d372261c51965bc1b8b165336c151bf8f5ea7262a29483ae59295300eb9cc55
name: perl-Crypt-SMIME
arch: armv5tel
version: 0.15
epoch: 0
release: 1.el6
summary: S/MIME message signing, verification, encryption and decryption
url: http://search.cpan.org/dist/Crypt-SMIME/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Crypt-SMIME-0.15-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-SMIME-0.15-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides a class for handling S/MIME messages. It can sign,
  verify, encrypt and decrypt messages. It requires libcrypto
  (http://www.openssl.org) to work.


pkgId: b24b0fcebfdaf0f0ba6fac04b683ef2aa372899607e5d75706ea1f6afb27fb0c
name: perl-Crypt-SSLeay
arch: armv5tel
version: 0.57
epoch: 0
release: 17.el6
summary: Crypt::SSLeay - OpenSSL glue that provides LWP https support
url: http://search.cpan.org/dist/Crypt-SSLeay/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: ras-test2.ellekom.local
rpm_sourcerpm: perl-Crypt-SSLeay-0.57-17.el6.src.rpm
location_href: perl-Crypt-SSLeay-0.57-17.el6.armv5tel.rpm
checksum_type: sha256
description:
  This perl module provides support for the https protocol under LWP, so
  that a LWP::UserAgent can make https GET & HEAD & POST
  requests. Please see perldoc LWP for more information on POST
  requests.

  The Crypt::SSLeay package contains Net::SSL, which is automatically
  loaded by LWP::Protocol::https on https requests, and provides the
  necessary SSL glue for that module to work.


pkgId: a6159e0ff41e1ec2fda5a6754c50628731cef65be69d17c0efb66e0ffc849069
name: perl-Crypt-Salsa20
arch: noarch
version: 0.03
epoch: 0
release: 2.el6
summary: Encrypt data with the Salsa20 cipher
url: http://search.cpan.org/dist/Crypt-Salsa20/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Crypt-Salsa20-0.03-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-Salsa20-0.03-2.el6.noarch.rpm
checksum_type: sha256
description:
  Crypt::Salsa20 implements D. J. Bernstein's Salsa20 stream cipher (a.k.a.
  Snuffle 2005) in Perl. For more information on Salsa20, see his page at
  http://cr.yp.to/snuffle.html.


pkgId: d182755e2b18497498d9890e6272231687d88211b1fb58abf6c9ae7b31fe3a89
name: perl-Crypt-SaltedHash
arch: noarch
version: 0.09
epoch: 0
release: 1.el6
summary: Perl interface to functions that assist in working with salted hashes
url: http://search.cpan.org/dist/Crypt-SaltedHash/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Crypt-SaltedHash-0.09-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-SaltedHash-0.09-1.el6.noarch.rpm
checksum_type: sha256
description:
  The Crypt::SaltedHash module provides an object oriented interface to
  create salted (or seeded) hashes of clear text data. The original
  formalization of this concept comes from RFC-3112 and is extended by the
  use of different digital algorithms.


pkgId: 7c1ed96b02d5926652901dd51ee160062e76c84e395f749c60034a98e7cda170
name: perl-Crypt-ScryptKDF
arch: armv5tel
version: 0.010
epoch: 0
release: 1.el6
summary: Scrypt password based key derivation function
url: http://search.cpan.org/dist/Crypt-ScryptKDF/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Crypt-ScryptKDF-0.010-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Crypt-ScryptKDF-0.010-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  Scrypt is a password-based key derivation function (like for example
  PBKDF2). Scrypt was designed to be "memory-hard" algorithm in order to make
  it expensive to perform large scale custom hardware attacks.


pkgId: 97d2262adaf82d095f0542162fe575b41acf7035424418fe2c0e2259728f2774
name: perl-Crypt-SmbHash
arch: noarch
version: 0.12
epoch: 0
release: 10.el6
summary: Pure-perl Lanman and NT MD4 hash functions
url: http://search.cpan.org/dist/Crypt-SmbHash/
rpm_license: GPLv2+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Crypt-SmbHash-0.12-10.el6.src.rpm
rpm_packager: Koji
location_href: perl-Crypt-SmbHash-0.12-10.el6.noarch.rpm
checksum_type: sha256
description:
  This module generates Lanman and NT MD4 style password hashes, using perl-only
  code for portability. The module aids in the administration of Samba style
  systems.


pkgId: 01a8a45e0241f334c1cc079a5861c4065a52751f2f5cac99214402c383b444cc
name: perl-DBD-AnyData
arch: noarch
version: 0.09
epoch: 0
release: 5.el6
summary: DBI access to XML, CSV and other formats
url: http://search.cpan.org/dist/DBD-AnyData
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DBD-AnyData-0.09-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBD-AnyData-0.09-5.el6.noarch.rpm
checksum_type: sha256
description:
  The DBD::AnyData module provides a DBI (Perl Database Interface) and SQL
  (Structured Query Language) interface to data in many formats and from many
  sources.


pkgId: b27db816e7676382f643d57006a37f1ca4b9b49dbe4cd039040bcd6130660cff
name: perl-DBD-CSV
arch: noarch
version: 0.22
epoch: 0
release: 8.el6
summary: DBI driver for CSV files
url: http://search.cpan.org/dist/DBD-CSV/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-DBD-CSV-0.22-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBD-CSV-0.22-8.el6.noarch.rpm
checksum_type: sha256
description:
  The DBD::CSV module is yet another driver for the DBI (Database
  independent interface for Perl). This one is based on the SQL
  "engine" SQL::Statement and the abstract DBI driver DBD::File
  and implements access to so-called CSV files (Comma separated
  values). Such files are mostly used for exporting MS Access and
  MS Excel data.


pkgId: c87d17877358f91b7026d338080fb0de03e777a378b97829f1d9b06612de61a3
name: perl-DBD-Firebird
arch: armv5tel
version: 1.31
epoch: 0
release: 1.el6
summary: A Firebird interface for perl
url: http://search.cpan.org/dist/DBD-Firebird/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-DBD-Firebird-1.31-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBD-Firebird-1.31-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  DBD::Firebird is a Perl module that works with the DBI module to provide
  access to Firebird databases.


pkgId: 648e5c120974c41921a18ea30b8b7b5d8577c8e973ebf9a068cbad91452d6176
name: perl-DBD-ODBC
arch: armv5tel
version: 1.50
epoch: 0
release: 3.el6
summary: ODBC Driver for DBI
url: http://search.cpan.org/dist/DBD-ODBC/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DBD-ODBC-1.50-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBD-ODBC-1.50-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module is needed to access ODBC databases from within Perl. The
  module uses the unixODBC manager to connect to the database.


pkgId: ab72bd2b9f1cffeaa58ca90c01fb575f5c71b8b97e996e9212125a5e200f560d
name: perl-DBD-SQLite
arch: armv5tel
version: 1.27
epoch: 0
release: 3.el6
summary: Self Contained RDBMS in a DBI Driver
url: http://search.cpan.org/dist/DBD-SQLite/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-DBD-SQLite-1.27-3.el6.src.rpm
location_href: perl-DBD-SQLite-1.27-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  SQLite is a public domain RDBMS database engine that you can find at
  http://www.hwaci.com/sw/sqlite/.

  Rather than ask you to install SQLite first, because SQLite is public domain,
  DBD::SQLite includes the entire thing in the distribution. So in order to get
  a fast transaction capable RDBMS working for your perl project you simply have
  to install this module, and nothing else.


pkgId: 24fa4dd3ce79a33e0341e9c8b1c5f9c84e1fe94a97317bda1b7e0844c3c0935a
name: perl-DBD-XBase
arch: noarch
version: 0.241
epoch: 0
release: 9.el6
summary: Perl module for reading and writing the dbf files
url: http://search.cpan.org/dist/DBD-XBase/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DBD-XBase-0.241-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBD-XBase-0.241-9.el6.noarch.rpm
checksum_type: sha256
description:
  This module can read and write XBase database files, known as dbf in
  dBase and FoxPro world. It also transparently reads memo fields from
  the dbt, fpt and smt files and works with index files (ndx, ntx, mdx, idx,
  cdx and SDBM). This module XBase.pm provides simple native interface
  to XBase files. For DBI compliant database access, see DBD::XBase and
  DBI modules and their man pages.


pkgId: 1cbc8973d72c47b1741582cc50535f768200a0b34ccfbf702ddbfe9bfe1ed476
name: perl-DBI
arch: armv5tel
version: 1.609
epoch: 0
release: 4.el6
summary: A database access API for perl
url: http://dbi.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-DBI-1.609-4.el6.src.rpm
location_href: perl-DBI-1.609-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  DBI is a database access Application Programming Interface (API) for
  the Perl Language. The DBI API Specification defines a set of
  functions, variables and conventions that provide a consistent
  database interface independent of the actual database being used.


pkgId: 675c19ecf6594b9016ea6d6195bf1fafce5f98d0df7f92b35583c78d6a01b827
name: perl-DBIx-DBSchema
arch: noarch
version: 0.38
epoch: 0
release: 1.el6
summary: Database-independent schema objects
url: http://search.cpan.org/dist/DBIx-DBSchema/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-DBIx-DBSchema-0.38-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-DBIx-DBSchema-0.38-1.el6.noarch.rpm
checksum_type: sha256
description:
  DBIx::DBSchema objects are collections of DBIx::DBSchema::Table objects and
  represent a database schema.

  This module implements an OO-interface to database schemas. Using this module,
  you can create a database schema with an OO Perl interface. You can read the
  schema from an existing database. You can save the schema to disk and restore
  it a different process. Most importantly, DBIx::DBSchema can write SQL CREATE
  statements statements for different databases from a single source.

  Currently supported databases are MySQL and PostgreSQL.


pkgId: ad36fbb5d4b35a359e07948af626496871b979cdbc43dd4d547bfddf6310c30d
name: perl-DBIx-RunSQL
arch: noarch
version: 0.16
epoch: 0
release: 1.el6
summary: Run SQL commands from a file
url: http://search.cpan.org/dist/DBIx-RunSQL/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DBIx-RunSQL-0.16-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBIx-RunSQL-0.16-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module abstracts away the "run these SQL statements to set up
  a database" into a module. It also abstracts away the reading of
  SQL from a file and allows for various command line parameters
  to be passed in.


pkgId: fb5566df89b3cbd1e530a4bb0fe50431196314117e6a6cb888f108d259da451e
name: perl-DBIx-Safe
arch: noarch
version: 1.2.5
epoch: 0
release: 6.el6
summary: Safer access to your database through a DBI database handle
url: http://search.cpan.org/dist/DBIx-Safe/
rpm_license: BSD
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-DBIx-Safe-1.2.5-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-DBIx-Safe-1.2.5-6.el6.noarch.rpm
checksum_type: sha256
description:
  The purpose of this module is to give controlled, limited access to an
  application, rather than simply passing it a raw database handle through
  DBI. DBIx::Safe acts as a wrapper to the database, by only allowing
  through the commands you tell it to. It filters all things related to
  the database handle - methods and attributes.


pkgId: c77b793886809930e4eed7f39fe41f6e2764f30dd53b268534a29af450b6a973
name: perl-DBIx-SearchBuilder
arch: noarch
version: 1.56
epoch: 0
release: 1.el6
summary: Encapsulate SQL queries and rows in simple perl objects
url: http://search.cpan.org/dist/DBIx-SearchBuilder/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-DBIx-SearchBuilder-1.56-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DBIx-SearchBuilder-1.56-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides an object-oriented mechanism for retrieving and
  updating data in a DBI-accessible database.


pkgId: d4bb364a65e5ee6b0289ce8fca4ab0d3b045811e4d0f4fc469f7a9ee18e5f8aa
name: perl-DBM-Deep
arch: noarch
version: 0.983
epoch: 0
release: 5.el6
summary: A pure perl multi-level hash/array DBM
url: http://search.cpan.org/dist/DBM-Deep/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-DBM-Deep-0.983-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-DBM-Deep-0.983-5.el6.noarch.rpm
checksum_type: sha256
description:
  A unique flat-file database module, written in pure perl. True multi-level
  hash/array support (unlike MLDBM, which is faked), hybrid OO / tie()
  interface, cross-platform FTPable files, and quite fast. Can handle
  millions of keys and unlimited hash levels without significant slow-down.
  Written from the ground-up in pure perl -- this is NOT a wrapper around a
  C-based DBM. Out-of-the-box compatibility with Unix, Mac OS X and Windows.


pkgId: 51bdb43e1d65a1a6a0e08d4e5060f8d3cbd152d97a0925aa566855dd5d6063a2
name: perl-Data-Alias
arch: armv5tel
version: 1.07
epoch: 0
release: 5.el6
summary: Comprehensive set of aliasing operations
url: http://search.cpan.org/dist/Data-Alias/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Data-Alias-1.07-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Alias-1.07-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  Aliasing is the phenomenon where two different expressions actually refer
  to the same thing. Modifying one will modify the other, and if you take a
  reference to both, the two values are the same.


pkgId: d841b3f25f205f127f4d285c2e8e567f585108efa2c3668fa8a72cfeb540295e
name: perl-Data-Buffer
arch: noarch
version: 0.04
epoch: 0
release: 8.el6
summary: Read/write buffer class for perl
url: http://search.cpan.org/dist/Data-Buffer/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Data-Buffer-0.04-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-Data-Buffer-0.04-8.el6.noarch.rpm
checksum_type: sha256
description:
  Data::Buffer implements a low-level binary buffer in which you can get and put
  integers, strings, and other data. Internally the implementation is based on
  pack and unpack, such that Data::Buffer is really a layer on top of those
  built-in functions.


pkgId: 2996510052cf84564277f6a49a77d133d9cfe01008f70748d70cd1446881542b
name: perl-Data-Dump
arch: noarch
version: 1.15
epoch: 0
release: 1.el6
summary: Pretty printing of data structures
url: http://search.cpan.org/dist/Data-Dump/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Data-Dump-1.15-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Data-Dump-1.15-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides a single function called dump() that takes a list of
  values as its argument and produces a string as its result. The string
  contains Perl code that, when evaled, produces a deep copy of the original
  arguments. The string is formatted for easy reading.


pkgId: d0e0277e2037b429e19b686e3945654013586f2b3e5d5f13c2ef292819bff839
name: perl-Data-Dump-Streamer
arch: armv5tel
version: 2.22
epoch: 0
release: 1.el6
summary: Accurately serialize a data structure as Perl code
url: http://search.cpan.org/dist/Data-Dump-Streamer/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Data-Dump-Streamer-2.22-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Dump-Streamer-2.22-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  Given a list of scalars or reference variables, writes out their contents
  in perl syntax. The references can also be objects. The contents of each
  variable is output using the least number of Perl statements as convenient,
  usually only one. Self-referential structures, closures, and objects are
  output correctly.


pkgId: 1515447f7c58c7e4376bf421d20db6a0ad6061f6246dd8734e16519255e6dcf0
name: perl-Data-Dumper-Concise
arch: noarch
version: 1.200
epoch: 0
release: 2.el6
summary: A convenient way to reproduce a set of Dumper options
url: http://search.cpan.org/dist/Data-Dumper-Concise
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Data-Dumper-Concise-1.200-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Data-Dumper-Concise-1.200-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module always exports a single function, Dumper, which can be
  called with an array of values to dump those values or with no arguments
  to return the Data::Dumper object it has created.  It exists,
  fundamentally, as a convenient way to reproduce a set of Dumper options
  that we've found ourselves using across large numbers of applications.


pkgId: 194244cd38446c98f96c39c9af438e03da488dd557751937f83b700f0105be5b
name: perl-Data-Dumper-Names
arch: noarch
version: 0.03
epoch: 0
release: 17.el6
summary: Data::Dumper like module for printing and eval data structures
url: http://search.cpan.org/dist/Data-Dumper-Names/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Data-Dumper-Names-0.03-17.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Dumper-Names-0.03-17.el6.noarch.rpm
checksum_type: sha256
description:
  The essential module Data::Dumper is used for printing perl data structures or
  suitable for eval. Data::Dumper::Names dump variables with names and without
  source filter.


pkgId: b6d2d424b1b80c74e2bd68c12e4a06d874672d5f0cdc8799ccfe3f7a85364c88
name: perl-Data-Hierarchy
arch: noarch
version: 0.34
epoch: 0
release: 6.el6
summary: Handle data in a hierarchical structure
url: http://search.cpan.org/dist/Data-Hierarchy/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp6_alw002
rpm_sourcerpm: perl-Data-Hierarchy-0.34-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Data-Hierarchy-0.34-6.el6.noarch.rpm
checksum_type: sha256
description:
  Data::Hierarchy provides a simple interface for manipulating inheritable
  data attached to a hierarchical environment (like filesystem).


pkgId: 54b9fb8f48d04dbbdc7c5417032ed0d530f8db7e7da317bcd67ecdeecfdffb98
name: perl-Data-ICal
arch: noarch
version: 0.22
epoch: 0
release: 7.el6
summary: Generates iCalendar (RFC 2445) calendar files
url: http://search.cpan.org/dist/Data-ICal/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Data-ICal-0.22-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-ICal-0.22-7.el6.noarch.rpm
checksum_type: sha256
description:
  A Data::ICal object represents a VCALENDAR object as defined in the
  iCalendar protocol (RFC 2445, MIME type "text/calendar"), as implemented in
  many popular calendaring programs such as Apple's iCal.


pkgId: 5210f5236986a516eec18de86f41e3ff1e95873769d5e9411b30a0e33d0976d8
name: perl-Data-OptList
arch: noarch
version: 0.104
epoch: 0
release: 4.el6
summary: Parse and validate simple name/value option pairs
url: http://search.cpan.org/dist/Data-OptList/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Data-OptList-0.104-4.el6.src.rpm
location_href: perl-Data-OptList-0.104-4.el6.noarch.rpm
checksum_type: sha256
description:
  Hashes are great for storing named data, but if you want more than one
  entry for a name, you have to use a list of pairs. Even then, this is
  really boring to write:


pkgId: 999aae695d1400b5d91561f32c9746c3e3bcbc9bd04fbd7e0ddb87507dbbe76d
name: perl-Data-Password
arch: noarch
version: 1.12
epoch: 0
release: 3.el6
summary: Perl extension for assessing password quality
url: http://search.cpan.org/dist/Data-Password/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Data-Password-1.12-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Password-1.12-3.el6.noarch.rpm
checksum_type: sha256
description:
  This modules checks potential passwords for crackability. It checks that
  the password is in the appropriate length, that it has enough character
  groups, that it does not contain the same chars repeatedly or ascending or
  descending characters, or characters close to each other in the keyboard. It
  will also attempt to search the ispell word file for existence of whole
  words.


pkgId: da5e73796b9d98fbb48cd050aabc12d6a547e7e0bf39e5e29868d9e76c9496c3
name: perl-Data-Record
arch: noarch
version: 0.02
epoch: 0
release: 1.el6
summary: "split" on steroids
url: http://search.cpan.org/dist/Data-Record/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Data-Record-0.02-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Record-0.02-1.el6.noarch.rpm
checksum_type: sha256
description:
  Sometimes we need data split into records and a simple split on the
  input record separator ($/) or some other value fails because the values
  we're splitting on may allowed in other parts of the data. Perhaps
  they're quoted. Perhaps they're embedded in other data which should not
  be split up.


pkgId: dc52e0726dcd6afb20cd62f46b0d65cc16e79bbec5a7ca9418e393a5e7c626be
name: perl-Data-Report
arch: noarch
version: 0.10
epoch: 0
release: 5.el6
summary: A flexible plugin-driven reporting framework
url: http://search.cpan.org/dist/Data-Report/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Data-Report-0.10-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Report-0.10-5.el6.noarch.rpm
checksum_type: sha256
description:
  Data::Report is a framework for report generation.

  You define the columns, add the data row by row, and get reports in
  text, HTML, CSV and so on. Textual ornaments like extra empty lines,
  dashed lines, and cell lines can be added in a way similar to HTML
  style sheets.


pkgId: e4db6da94a412a8ae67a8ec394dbe60a9afc85ea3acc198b3a0725499766b736
name: perl-Data-Section
arch: noarch
version: 0.101620
epoch: 0
release: 2.el6
summary: Read multiple hunks of data out of your DATA section
url: http://search.cpan.org/dist/Data-Section/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Data-Section-0.101620-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Section-0.101620-2.el6.noarch.rpm
checksum_type: sha256
description:
  Data::Section provides an easy way to access multiple named chunks of line-
  oriented data in your module's DATA section. It was written to allow
  modules to store their own templates, but probably has other uses.


pkgId: b2a417798f249952e49aaa68ec1fcbacf973d74feeb1a07732e5d915692a2b7b
name: perl-Data-Tumbler
arch: noarch
version: 0.005
epoch: 0
release: 2.el6
summary: Dynamic generation of nested combinations
url: http://search.cpan.org/dist/Data-Tumbler/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Data-Tumbler-0.005-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Tumbler-0.005-2.el6.noarch.rpm
checksum_type: sha256
description:
  The tumble() method calls a sequence of 'provider' code references, each of
  which returns a hash. The first provider is called and then, for each hash item
  it returns, the tumble() method recurses to call the next provider. The
  recursion continues until there are no more providers to call, at which point
  the consumer code reference is called. Effectively the providers create a tree
  of combinations and the consumer is called at the leaves of the tree. If a
  provider returns no items then that part of the tree is pruned. Further
  providers, if any, are not called and the consumer is not called.

  During a call to tumble() three values are passed down through the tree and
  into the consumer: path, context, and payload. The path and context are derived
  from the names and values of the hashes returned by the providers. Typically
  the path defines the current "path" through the tree of combinations. The
  providers are passed the current path, context, and payload. The payload is
  cloned at each level of recursion so that any changes made to it by providers
  are only visible within the scope of the generated sub-tree.


pkgId: 24e18d2b807d404bf7a05391de5e1bebf3d06a7b35862d8dbc3414f04888b2ab
name: perl-Data-Types
arch: noarch
version: 0.09
epoch: 0
release: 5.el6
summary: Validate and convert data types
url: http://search.cpan.org/dist/Data-Types/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Data-Types-0.09-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Types-0.09-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module exports a number of functions that are useful for validating
  and converting data types. It is intended for use in applications where
  data types are more important than they typically are in Perl -- e.g.,
  database applications.


pkgId: 8a9fbb58fa934ccad3a05efe86a3a5f11b2c257bcba9af81cb3870b0767dfd69
name: perl-Data-Uniqid
arch: noarch
version: 0.12
epoch: 0
release: 2.el6
summary: Perl extension for simple generating of unique id's
url: http://search.cpan.org/dist/Data-Uniqid/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Data-Uniqid-0.12-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Data-Uniqid-0.12-2.el6.noarch.rpm
checksum_type: sha256
description:
  Data::Uniqid provides three simple routines for generating unique ids.
  These ids are coded with a Base62 system to make them short and handy (e.g.
  to use it as part of a URL).


pkgId: 6d6e39b6b52c998887d947825a2ebc0fa329e19375c28c34b574e7023edae1d8
name: perl-Date-Calc
arch: noarch
version: 6.3
epoch: 0
release: 2.el6
summary: Gregorian calendar date calculations
url: http://search.cpan.org/dist/Date-Calc/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Date-Calc-6.3-2.el6.src.rpm
location_href: perl-Date-Calc-6.3-2.el6.noarch.rpm
checksum_type: sha256
description:
  The library provides all sorts of date calculations based on the
  Gregorian calendar (the one used in all western countries today),
  thereby complying with all relevant norms and standards: ISO/R
  2015-1971, DIN 1355 and, to some extent, ISO 8601 (where applicable).


pkgId: dfea419e2230bd24febf9fe7ed5670909536baee839e4019f228f8c8617cdfbf
name: perl-Date-Handler
arch: noarch
version: 1.2
epoch: 0
release: 1.el6
summary: Easy but complete date object
url: http://search.cpan.org/dist/Date-Handler/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Date-Handler-1.2-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Date-Handler-1.2-1.el6.noarch.rpm
checksum_type: sha256
description:
  Date::Handler is a container for dates that holds all the methods to
  transform itself from Timezone to Timezone and format itself. This module
  idea comes from an original version written by dLux <dlux@kapu.hu> in his
  module Class::Date.


pkgId: 05d735f07c918eac43e63417e21a2ac93286ed5f061d4bd76d5dbb34f896061e
name: perl-Date-Holidays-DE
arch: noarch
version: 1.9
epoch: 0
release: 4.el6
summary: Perl module to determine German holidays
url: http://search.cpan.org/dist/Date-Holidays-DE/
rpm_license: MIT
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Date-Holidays-DE-1.9-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Date-Holidays-DE-1.9-4.el6.noarch.rpm
checksum_type: sha256
description:
  A perl module that creates a list of German holidays in a given year.
  It knows about special holiday regulations for all of Germany's federal
  states and also about "semi-holidays" and religious "silent days" that
  will be treated as holidays on request. Holidays that occur on weekends
  can be excluded from the generated list. The generated list can also be
  freely formatted using regular strftime() format definitions.


pkgId: b44f9db142d9e2b74092425e8be09fecd141a2367ee8f9e5c11cbebec3e882e1
name: perl-Date-ICal
arch: noarch
version: 1.72
epoch: 0
release: 2.el6
summary: Perl extension for ICalendar date objects
url: http://search.cpan.org/dist/Date-ICal/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Date-ICal-1.72-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Date-ICal-1.72-2.el6.noarch.rpm
checksum_type: sha256
description:
  Date::ICal talks the ICal date format, and is intended to be a base class
  for other date/calendar modules that know about ICal time format also.


pkgId: 66cc98fd94b0de278000eb8d5a372405b0c322f537b11bf3d5bd23109375e94f
name: perl-Date-Leapyear
arch: noarch
version: 1.72
epoch: 0
release: 2.el6
summary: Is a particular year a leap year?
url: http://search.cpan.org/dist/Date-Leapyear/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp11_alw002
rpm_sourcerpm: perl-Date-Leapyear-1.72-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Date-Leapyear-1.72-2.el6.noarch.rpm
checksum_type: sha256
description:
  Date::Leapyear exports one function - isleap - which returns 1 or 0 if a
  year is leap, or not, respectively.


pkgId: 0ae8ebd8a88b2ec20bfb069b0ad19c2f9b22c650796cb04fcc9f4e0cc5a64727
name: perl-Date-Manip
arch: noarch
version: 6.24
epoch: 0
release: 1.el6
summary: A Perl module containing a wide variety of date manipulation routines
url: http://search.cpan.org/dist/Date-Manip/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: dream1.redsleeve.org
rpm_sourcerpm: perl-Date-Manip-6.24-1.el6.src.rpm
location_href: perl-Date-Manip-6.24-1.el6.noarch.rpm
checksum_type: sha256
description:
  This is a set of routines designed to make any common date/time
  manipulation easy to do.  Operations such as comparing two times,
  calculating a time a given amount of time from another, or parsing
  international times are all easily done.


pkgId: e476a640ce0b4a0692dba7c2e7f4ff7e805cb64f893db3d83ca43b4249b68368
name: perl-Date-Pcalc
arch: noarch
version: 1.2
epoch: 0
release: 7.el6
summary: Gregorian calendar date calculations
url: http://search.cpan.org/dist/Date-Pcalc/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp11_alw002
rpm_sourcerpm: perl-Date-Pcalc-1.2-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-Date-Pcalc-1.2-7.el6.noarch.rpm
checksum_type: sha256
description:
  This package consists of a Perl module for all kinds of date calculations based
  on the Gregorian calendar (the one used in all western countries today),
  thereby complying with all relevant norms and standards: ISO/R 2015-1971,
  DIN 1355 and, to some extent, ISO 8601 (where applicable).


pkgId: 58375fff4cf772e54aac4529ea7ed1d887f30779c9b71b8626dac1f74707bc11
name: perl-DateTime
arch: armv5tel
version: 0.5300
epoch: 1
release: 2.el6
summary: Date and time objects
url: http://search.cpan.org/dist/DateTime/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva1.redsleeve.org
rpm_sourcerpm: perl-DateTime-0.5300-2.el6.src.rpm
location_href: perl-DateTime-0.5300-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  DateTime is a class for the representation of date/time combinations, and
  is part of the Perl DateTime project. For details on this project please
  see http://datetime.perl.org/. The DateTime site has a FAQ which may help
  answer many "how do I do X?" questions. The FAQ is at
  http://datetime.perl.org/?FAQ.


pkgId: 84b2b4bf796a5825ad3c3ad40fc51b7a71e5745c03bdbc72a13af766af896946
name: perl-DateTime-Calendar-Mayan
arch: noarch
version: 0.0601
epoch: 0
release: 4.el6
summary: Mayan Long Count Calendar
url: http://search.cpan.org/dist/DateTime-Calendar-Mayan
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-DateTime-Calendar-Mayan-0.0601-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-DateTime-Calendar-Mayan-0.0601-4.el6.noarch.rpm
checksum_type: sha256
description:
  An implementation of the Mayan Long Count, Haab, and Tzolkin calendars
  as defined in "Calendrical Calculations The Millennium Edition".
  Supplemented by "Frequently Asked Questions about Calendars".


pkgId: 6b13c379fe0a9cad7ecb94336c2d397255dacd100464201665dc8315aa992680
name: perl-DateTime-Event-ICal
arch: noarch
version: 0.10
epoch: 0
release: 1.el6
summary: Perl DateTime extension for computing rfc2445 recurrences
url: http://search.cpan.org/dist/DateTime-Event-ICal/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-DateTime-Event-ICal-0.10-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Event-ICal-0.10-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides convenience methods that let you easily create
  DateTime::Set objects for rfc2445 style recurrences.


pkgId: 42e283394498e718de67b066b67b7710cbfd21666691ddc26a76d8042d43de8f
name: perl-DateTime-Event-Recurrence
arch: noarch
version: 0.16
epoch: 0
release: 8.el6
summary: DateTime::Set extension for create basic recurrence sets
url: http://search.cpan.org/dist/DateTime-Event-Recurrence/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-DateTime-Event-Recurrence-0.16-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Event-Recurrence-0.16-8.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides convenience methods that let you easily create
  DateTime::Set objects for various recurrences, such as "once a month" or
  "every day". You can also create more complicated recurrences, such as
  "every Monday, Wednesday and Thursday at 10:00 AM and 2:00 PM".


pkgId: 74a5f7442951cd6dba5bc97222853610853fdf9a95255de2351b8c30bdfac7bd
name: perl-DateTime-Format-Builder
arch: noarch
version: 0.8000
epoch: 0
release: 2.el6
summary: Create DateTime parser classes and objects
url: http://search.cpan.org/dist/DateTime-Format-Builder
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DateTime-Format-Builder-0.8000-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-Builder-0.8000-2.el6.noarch.rpm
checksum_type: sha256
description:
  DateTime::Format::Builder creates DateTime parsers. Many string formats of
  dates and times are simple and just require a basic regular expression to
  extract the relevant information. Builder provides a simple way to do this
  without writing reams of structural code.

  Builder provides a number of methods, most of which you'll never need, or at
  least rarely need. They're provided more for exposing of the module's innards
  to any subclasses, or for when you need to do something slightly beyond what
  is expected.


pkgId: b1ad73fefc044b996ce8f11d1f37a835266ea30d222b6ced868cb8b12297a1cc
name: perl-DateTime-Format-DateParse
arch: noarch
version: 0.05
epoch: 0
release: 4.el6
summary: Parse Date::Parse compatible formats
url: http://search.cpan.org/dist/DateTime-Format-DateParse/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-DateTime-Format-DateParse-0.05-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-DateParse-0.05-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a DateTime compatibility wrapper around Date::Parse; it allows
  one to easily parse formats Date::Parse recognizes for DateTime.


pkgId: e63ecd7c9246b0f307ccbe28e126c0b8a20a5e60f3dfe5b6a1a79709ed479c20
name: perl-DateTime-Format-Excel
arch: noarch
version: 0.31
epoch: 1
release: 1.el6
summary: Convert between DateTime and Excel dates
url: http://search.cpan.org/dist/DateTime-Format-Excel/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-DateTime-Format-Excel-0.31-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-DateTime-Format-Excel-0.31-1.el6.noarch.rpm
checksum_type: sha256
description:
  Excel uses a different system for its dates than most Unix programs.
  This module allows to convert between a few of the Excel raw formats
  and DateTime objects, which can then be further converted via any of
  the other DateTime::Format::* modules, or with DateTime's methods.


pkgId: a24012a73e2d45d62409cb9755bc7437d2c287b0fd7de1a809a3de80abcb3862
name: perl-DateTime-Format-HTTP
arch: noarch
version: 0.38
epoch: 0
release: 3.el6
summary: HTTP protocol date conversion routines
url: http://search.cpan.org/dist/DateTime-Format-HTTP
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-DateTime-Format-HTTP-0.38-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-DateTime-Format-HTTP-0.38-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that deal with the date formats used by the
  HTTP protocol (and then some).


pkgId: 56546eea57a43962530a124769515fc7e811120066d056e28f48aba4c7c563a9
name: perl-DateTime-Format-IBeat
arch: noarch
version: 0.161
epoch: 0
release: 7.el6
summary: Format times in .beat notation
url: http://search.cpan.org/dist/DateTime-Format-IBeat
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-DateTime-Format-IBeat-0.161-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-DateTime-Format-IBeat-0.161-7.el6.noarch.rpm
checksum_type: sha256
description:
  No Time Zones, No Geographical Borders

  How long is a Swatch .beat? In short, we have divided up the virtual and real
  day into 1000 beats. One Swatch beat is the equivalent of 1 minute 26.4
  seconds. That means that 12 noon in the old time system is the equivalent of
  500 Swatch .beats.


pkgId: feadf484186d71bb7f7235db3f76dfe4dcde874654e35ad3686c5fbba4c5b07d
name: perl-DateTime-Format-ICal
arch: noarch
version: 0.09
epoch: 0
release: 3.el6
summary: Parse and format iCal datetime and duration strings
url: http://search.cpan.org/dist/DateTime-Format-ICal/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-DateTime-Format-ICal-0.09-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-ICal-0.09-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module understands the ICal date/time and duration formats, as defined
  in RFC 2445. It can be used to parse these formats in order to create the
  appropriate objects.


pkgId: 1dfcfaa6cd473dd35d7e097d4d5cdc35a045c6b250b0ae4bc13a067006752fb2
name: perl-DateTime-Format-ISO8601
arch: noarch
version: 0.07
epoch: 0
release: 7.el6
summary: Parses ISO8601 formats
url: http://search.cpan.org/dist/DateTime-Format-ISO8601
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-DateTime-Format-ISO8601-0.07-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-ISO8601-0.07-7.el6.noarch.rpm
checksum_type: sha256
description:
  Parses almost all ISO8601 date and time formats. ISO8601 time-intervals
  will be supported in a later release.


pkgId: 6ba02a0ffd34ae18dcef8ce135686097da2830186bd792f8d33a3845ed1ca22e
name: perl-DateTime-Format-Mail
arch: noarch
version: 0.3001
epoch: 0
release: 6.el6
summary: Convert between DateTime and RFC2822/822 formats
url: http://search.cpan.org/dist/DateTime-Format-Mail
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-DateTime-Format-Mail-0.3001-6.el6.src.rpm
location_href: perl-DateTime-Format-Mail-0.3001-6.el6.noarch.rpm
checksum_type: sha256
description:
  RFCs 2822 and 822 specify date formats to be used by email. This module parses
  and emits such dates.

  RFC2822 (April 2001) introduces a slightly different format of date than that
  used by RFC822 (August 1982). The main correction is that the preferred format
  is more limited, and thus easier to parse programmatically.

  Despite the ease of generating and parsing perfectly valid RFC822 and RFC2822
  people still get it wrong. This module aims to correct that.


pkgId: bde9ca8f4f23d505a17dad422c7443104a5e40c9466ed495556490d2a450ad56
name: perl-DateTime-Format-MySQL
arch: noarch
version: 0.04
epoch: 0
release: 8.el6
summary: Parse and format MySQL dates and times
url: http://search.cpan.org/dist/DateTime-Format-MySQL
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-DateTime-Format-MySQL-0.04-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-MySQL-0.04-8.el6.noarch.rpm
checksum_type: sha256
description:
  This module understands the formats used by MySQL for its DATE, DATETIME,
  TIME, and TIMESTAMP data types. It can be used to parse these formats in order
  to create DateTime objects, and it can take a DateTime object and produce a
  string representing it in the MySQL format.


pkgId: 01224700b910af3b02d912e4cf70ea6f60a7dae566cb828e06ff6f182388c312
name: perl-DateTime-Format-Oracle
arch: noarch
version: 0.06
epoch: 0
release: 3.el6
summary: Parse and format Oracle dates and timestamps
url: http://search.cpan.org/dist/DateTime-Format-Oracle/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-DateTime-Format-Oracle-0.06-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-Oracle-0.06-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module may be used to convert Oracle date and timestamp values into
  DateTime objects. It also can take a DateTime object and produce a date
  string matching the NLS_DATE_FORMAT.


pkgId: e73ffea031a102a38b80a9905e5f0549205b46e7a68db927e02af62cf30e5e88
name: perl-DateTime-Format-Pg
arch: noarch
version: 0.16004
epoch: 0
release: 3.el6
summary: Parse and format PostgreSQL dates and times
url: http://search.cpan.org/dist/DateTime-Format-Pg/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-DateTime-Format-Pg-0.16004-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-Pg-0.16004-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module understands the formats used by PostgreSQL for its DATE, TIME,
  TIMESTAMP, and INTERVAL data types. It can be used to parse these formats
  in order to create DateTime or DateTime::Duration objects, and it can take
  a DateTime or DateTime::Duration object and produce a string representing
  it in a format accepted by PostgreSQL.


pkgId: 55543c0ebb6995f96291a7e7bbaa38fba9fa042e1649e86d5b6ecd9720ac2db4
name: perl-DateTime-Format-RFC3339
arch: noarch
version: 1.0.5
epoch: 0
release: 1.el6
summary: Parse and format RFC3339 datetime strings
url: http://search.cpan.org/dist/DateTime-Format-RFC3339/
rpm_license: CC0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DateTime-Format-RFC3339-1.0.5-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-RFC3339-1.0.5-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module understands the RFC3339 date/time format, an ISO 8601 profile,
  defined at http://tools.ietf.org/html/rfc3339.


pkgId: fe705fca1f6c3188c5e871827042188b0c952604ea6a68fcd6904c087b9ac2e1
name: perl-DateTime-Format-SQLite
arch: noarch
version: 0.11
epoch: 0
release: 2.el6
summary: Parse and format SQLite dates and times
url: http://search.cpan.org/dist/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-DateTime-Format-SQLite-0.11-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-SQLite-0.11-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module understands the formats used by SQLite for its 'date',
  'datetime' and 'time' functions. It can be used to parse these formats
  in order to create the DateTime manpage objects, and it can take a
  DateTime object and produce a timestring accepted by SQLite.*NOTE:*
  SQLite does not have real date/time types but stores everything as
  strings. This module deals with the date/time strings as
  understood/returned by SQLite's 'date', 'time', 'datetime', 'julianday'
  and 'strftime' SQL functions. You will usually want to store your dates
  in one of these formats.


pkgId: 5a6e587314bba1660880156086dbda50b02e5a01405b2b07b5ca93394498d98a
name: perl-DateTime-Format-Strptime
arch: noarch
version: 1.1000
epoch: 0
release: 2.el6
summary: Parse and format strp and strf time patterns
url: http://search.cpan.org/dist/DateTime-Format-Strptime/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-DateTime-Format-Strptime-1.1000-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-DateTime-Format-Strptime-1.1000-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements most of strptime(3), the POSIX function that is the
  reverse of strftime(3), for DateTime. While strftime takes a DateTime and a
  pattern and returns a string, strptime takes a string and a pattern and
  returns the DateTime object associated.


pkgId: b6e6f956fbb376913b045f730147de4fac0e7a90d989cd59aa59fa3a1a431b85
name: perl-DateTime-Format-W3CDTF
arch: noarch
version: 0.04
epoch: 0
release: 8.el6
summary: Parse and format W3CDTF datetime strings
url: http://search.cpan.org/dist/DateTime-Format-W3CDTF/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-DateTime-Format-W3CDTF-0.04-8.el6.src.rpm
location_href: perl-DateTime-Format-W3CDTF-0.04-8.el6.noarch.rpm
checksum_type: sha256
description:
  This module understands the W3CDTF date/time format, an ISO 8601 profile,
  defined at http://www.w3.org/TR/NOTE-datetime. This format as the native
  date format of RSS 1.0.


pkgId: 59445114c1a563cb4fb536af5bb6ab5b3bc4eefbb89769c0a2a6c519cfd5fbe3
name: perl-DateTime-Format-XSD
arch: noarch
version: 0.2
epoch: 0
release: 1.el6
summary: Format DateTime according to xsd:dateTime
url: http://search.cpan.org/dist/DateTime-Format-XSD/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DateTime-Format-XSD-0.2-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Format-XSD-0.2-1.el6.noarch.rpm
checksum_type: sha256
description:
  XML Schema defines a usage profile which is a subset of the ISO8601
  profile. This profile defines that
    'YYYY-MM-DD"T"HH:MI:SS(Z|[+-]zh:zm)'
  is the only possible representation for a dateTime, despite
  all other options ISO provides.


pkgId: bbef76b3d959f121eb4218bda51bfdd5734df559fb1333325aeeb04d8861a795
name: perl-DateTime-Incomplete
arch: noarch
version: 0.07
epoch: 0
release: 3.el6
summary: Representing partial dates and times
url: http://search.cpan.org/dist/DateTime-Incomplete/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-DateTime-Incomplete-0.07-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-DateTime-Incomplete-0.07-3.el6.noarch.rpm
checksum_type: sha256
description:
  DateTime::Incomplete is a class for representing partial dates and times.
  These are actually encountered relatively frequently. For example, a birthday
  is commonly given as a month and day, without a year.


pkgId: f309f8599e988c00597ff528840d5f1e69ed48fd436e31b21967fc62f222d103
name: perl-DateTime-Precise
arch: noarch
version: 1.05
epoch: 0
release: 6.el6
summary: Perform common time and date operations with additional GPS operations
url: http://search.cpan.org/dist/DateTime-Precise
rpm_license: Public Domain
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-DateTime-Precise-1.05-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-DateTime-Precise-1.05-6.el6.noarch.rpm
checksum_type: sha256
description:
  The purpose of this library was to replace our dependence on Unix epoch time,
  which, being limited to a range of about 1970 to 2030, is inadequate for our
  purposes (we have data as old as 1870). This date library effectively handles
  dates from A.D. 1000 to infinity, and would probably work all the way back to 0
  (ignoring, of course, the switch-over to the Gregorian calendar). The useful
  features of Unix epoch time (ease of date difference calculation and date
  comparison, strict ordering) are preserved, and elements such as
  human-legibility are added. The library handles fractional seconds and some
  date/time manipulations used for the Global Positioning Satellite system.


pkgId: 5d8a53b66934e9f1b8be32407ed6a2796a82e515a36cad471089eea22c4ba3d6
name: perl-Declare-Constraints-Simple
arch: noarch
version: 0.03
epoch: 0
release: 5.el6
summary: Declarative Validation of Data Structures
url: http://search.cpan.org/dist/Declare-Constraints-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp12_alw002
rpm_sourcerpm: perl-Declare-Constraints-Simple-0.03-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Declare-Constraints-Simple-0.03-5.el6.noarch.rpm
checksum_type: sha256
description:
  The main purpose of this module is to provide an easy way to build a
  profile to validate a data structure. It does this by giving you a set of
  declarative keywords in the importing namespace.


pkgId: ccb0fd71c799febd30a963bec0e7a9584cdf03a4d69ccd6e2539498a4e3829a3
name: perl-Devel-Autoflush
arch: noarch
version: 0.06
epoch: 0
release: 3.el6
summary: Set autoflush from the command line
url: http://search.cpan.org/dist/Devel-Autoflush/
rpm_license: ASL 2.0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Devel-Autoflush-0.06-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-Autoflush-0.06-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a hack to set autoflush for STDOUT and STDERR from the
  command line or from PERL5OPT for code that needs it but doesn't have it.


pkgId: 192497a157f1f30bc760cd5402ebeec4d9efda03b623166a4eb2825cd25141c5
name: perl-Devel-CheckLib
arch: noarch
version: 0.98
epoch: 0
release: 1.el6
summary: Check that a library is available
url: http://search.cpan.org/dist/Devel-CheckLib/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Devel-CheckLib-0.98-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-CheckLib-0.98-1.el6.noarch.rpm
checksum_type: sha256
description:
  Devel::CheckLib is a perl module that checks whether a particular C library
  and its headers are available.


pkgId: 6738fcca931b38a25b67efa9a9652d5d7a812390360db0d8f35ce2c4acd74071
name: perl-Devel-Cycle
arch: noarch
version: 1.10
epoch: 0
release: 3.1.el6
summary: Find memory cycles in objects
url: http://search.cpan.org/dist/Devel-Cycle/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Devel-Cycle-1.10-3.1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Devel-Cycle-1.10-3.1.el6.noarch.rpm
checksum_type: sha256
description:
  This is a simple developer's tool for finding circular references in
  objects and other types of references. Because of Perl's reference-count
  based memory management, circular references will cause memory leaks.


pkgId: c2c428d79b9d39e752f86bfd512b16c0ee6f61b653776c51610286afa3cc344c
name: perl-Devel-Declare
arch: armv5tel
version: 0.006011
epoch: 0
release: 4.el6
summary: Adding keywords to perl, in perl
url: http://search.cpan.org/dist/Devel-Declare/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Devel-Declare-0.006011-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-Declare-0.006011-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  Devel::Declare can install subroutines called declarators which locally
  take over Perl's parser, allowing the creation of new syntax.


pkgId: e96c4e5834853e2a6bb7a0b1702197b24795882ef8d22fb130605718ab7260d7
name: perl-Devel-EnforceEncapsulation
arch: noarch
version: 0.50
epoch: 0
release: 3.el6
summary: Find access violations to blessed objects
url: http://search.cpan.org/dist/Devel-EnforceEncapsulation/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Devel-EnforceEncapsulation-0.50-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Devel-EnforceEncapsulation-0.50-3.el6.noarch.rpm
checksum_type: sha256
description:
  Encapsulation is the practice of creating subroutines to access the properties
  of a class instead of accessing those properties directly. The advantage of
  good encapsulation is that the author is permitted to change the internal
  implementation of a class without breaking its usage.

  Object-oriented programming in Perl is most commonly implemented via blessed
  hashes. This practice makes it easy for users of a class to violate
  encapsulation by simply accessing the hash values directly. Although less
  common, the same applies to classes implemented via blessed arrays, scalars,
  filehandles, etc.

  This module is a hack to block those direct accesses. If you try to access a
  hash value of an object from its own class, or a superclass or subclass, all
  goes well. If you try to access a hash value from any other package, an
  exception is thrown. The same applies to the scalar value of a blessed scalar,
  entry in a blessed array, etc.

  To be clear: this class is NOT intended for strict enforcement of
  encapsulation. If you want bullet-proof encapsulation, use inside-out objects
  or the like. Instead, this module is intended to be a development or debugging
  aid in catching places where direct access is used against classes implemented
  as blessed hashes.

  To repeat: the encapsulation enforced here is a hack and is easily
  circumvented. Please use this module for good (finding bugs), not evil (making
  life harder for downstream developers).


pkgId: ac248aad1d064e8d433a347afe39809fd19c67f65611538aec0582507205e147
name: perl-Devel-FindRef
arch: armv5tel
version: 1.42
epoch: 0
release: 8.el6
summary: Where is that reference to my variable hiding?
url: http://search.cpan.org/dist/Devel-FindRef/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Devel-FindRef-1.42-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-FindRef-1.42-8.el6.armv5tel.rpm
checksum_type: sha256
description:
  Tracking down reference problems (e.g. you expect some object to be
  destroyed, but there are still references to it that keep it alive) can be
  very hard. Fortunately, perl keeps track of all its values, so tracking
  references "backwards" is usually possible.


pkgId: 129b9ef3966eed38c973448f292337eea05d95733aa402a41829f8ad3935f91d
name: perl-Devel-GlobalDestruction
arch: armv5tel
version: 0.02
epoch: 0
release: 7.el6
summary: Expose PL_dirty, the flag which marks global destruction
url: http://search.cpan.org/dist/Devel-GlobalDestruction
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Devel-GlobalDestruction-0.02-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-Devel-GlobalDestruction-0.02-7.el6.armv5tel.rpm
checksum_type: sha256
description:
  Perl's global destruction is a little tricky to deal with with respect to
  finalizers because it's not ordered and objects can sometimes disappear.

  Writing defensive destructors is hard and annoying, and usually if global
  destruction is happenning you only need the destructors that free up non
  process local resources to actually execute.

  For these constructors you can avoid the mess by simply bailing out if
  global destruction is in effect.


pkgId: be4da3565065a886b56bf4498c18f063e60680f5a6df614850423ed65cb83ac0
name: perl-Devel-Hide
arch: noarch
version: 0.0008
epoch: 0
release: 2.el6
summary: Forces the unavailability of specified Perl modules (for testing)
url: http://search.cpan.org/dist/Devel-Hide/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Devel-Hide-0.0008-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Devel-Hide-0.0008-2.el6.noarch.rpm
checksum_type: sha256
description:
  Given a list of Perl modules/filenames, this module makes require and
  use statements fail (no matter the specified files/modules are
  installed or not).


pkgId: 93fd426275e739c1d747d373de01f13392f3abf7b145470ad3ef265539f46c8d
name: perl-Devel-Leak
arch: armv5tel
version: 0.03
epoch: 0
release: 10.el6
summary: Utility for looking for perl objects that are not reclaimed
url: http://search.cpan.org/dist/Devel-Leak/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Devel-Leak-0.03-10.el6.src.rpm
location_href: perl-Devel-Leak-0.03-10.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides a basic way to discover if a piece of perl code
  is allocating perl data and not releasing them again.


pkgId: 41b76e88edaedbd221ac70619ea79e67195ae50cda5461f211e3b7a1da1d577b
name: perl-Devel-OverloadInfo
arch: noarch
version: 0.002
epoch: 0
release: 2.el6
summary: Introspect overloaded operators
url: http://search.cpan.org/dist/Devel-OverloadInfo/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: duplo
rpm_sourcerpm: perl-Devel-OverloadInfo-0.002-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-OverloadInfo-0.002-2.el6.noarch.rpm
checksum_type: sha256
description:
  Devel::OverloadInfo returns information about overloaded operators for a
  given class (or object), including where in the inheritance hierarchy the
  overloads are declared and where the code implementing it is.


pkgId: 6f4608ea663e5d276e7c3f32b852094ca41dd06acbc3359c032f536e612cc8e5
name: perl-Devel-PatchPerl
arch: noarch
version: 0.60
epoch: 0
release: 2.el6
summary: Patch perl source à la Devel::PPPort's buildperl.pl
url: http://search.cpan.org/dist/Devel-PatchPerl/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Devel-PatchPerl-0.60-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Devel-PatchPerl-0.60-2.el6.noarch.rpm
checksum_type: sha256
description:
  Devel::PatchPerl is a modularisation of the patching code contained in
  Devel::PPPort's buildperl.pl.


pkgId: 388db901a8add4ed61cb900f56f7f3b3c57c93d887d49581c35b7ec1dcb73f88
name: perl-Devel-Refcount
arch: armv5tel
version: 0.07
epoch: 0
release: 3.el6
summary: Obtain the REFCNT value of a referent
url: http://search.cpan.org/dist/Devel-Refcount/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Devel-Refcount-0.07-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Devel-Refcount-0.07-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides a single function which obtains the reference count of
  the object being pointed to by the passed reference value.


pkgId: 2264fe5c508f7122dc2781698101b3385fca476e0262f4172066e7acda9355de
name: perl-Devel-StackTrace
arch: noarch
version: 1.22
epoch: 1
release: 4.el6
summary: Perl module implementing stack trace and stack trace frame objects
url: http://search.cpan.org/dist/Devel-StackTrace
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Devel-StackTrace-1.22-4.el6.src.rpm
location_href: perl-Devel-StackTrace-1.22-4.el6.noarch.rpm
checksum_type: sha256
description:
  The Devel::StackTrace module contains two classes, Devel::StackTrace
  and Devel::StackTraceFrame.  The goal of this object is to encapsulate
  the information that can found through using the caller() function, as
  well as providing a simple interface to this data.

  The Devel::StackTrace object contains a set of Devel::StackTraceFrame
  objects, one for each level of the stack.  The frames contain all the
  data available from caller() as of Perl 5.6.0.


pkgId: 5bfac240c338bfdf40ea89fc731edf15219e598944016096e2e14eea3fcdecd6
name: perl-Devel-StackTrace-AsHTML
arch: noarch
version: 0.11
epoch: 0
release: 2.el6.1
summary: Displays a stack trace in HTML
url: http://search.cpan.org/dist/Devel-StackTrace-AsHTML
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Devel-StackTrace-AsHTML-0.11-2.el6.1.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-StackTrace-AsHTML-0.11-2.el6.1.noarch.rpm
checksum_type: sha256
description:
  Devel::StackTrace::AsHTML adds an 'as_html' method to Devel::StackTrace
  which displays the stack trace in beautiful HTML, with code snippet
  context and function parameters. If you call it on an instance of
  Devel::StackTrace::WithLexicals, you even get to see the lexical
  variables of each stack frame.


pkgId: 3c92d4ffd634ab0a168fc96b69166c1ee9f59d5527ae7facd9e3de7568ba0953
name: perl-Devel-Symdump
arch: noarch
version: 2.08
epoch: 1
release: 2.el6
summary: A Perl module for inspecting Perl's symbol table
url: http://search.cpan.org/dist/Devel-Symdump/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Devel-Symdump-2.08-2.el6.src.rpm
location_href: perl-Devel-Symdump-2.08-2.el6.noarch.rpm
checksum_type: sha256
description:
  The perl module Devel::Symdump provides a convenient way to inspect
  perl's symbol table and the class hierarchy within a running program.


pkgId: e89860d7cc11fca4265ff0e097ff4b9947576b6aa721b4a479660541f81488ee
name: perl-Devel-Timer
arch: noarch
version: 0.05
epoch: 0
release: 2.el6
summary: Track and report execution time for parts of code
url: http://search.cpan.org/dist/Devel-Timer/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Devel-Timer-0.05-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-Timer-0.05-2.el6.noarch.rpm
checksum_type: sha256
description:
  Devel::Timer allows developers to accurately time how long a specific
  piece of code takes to execute. This can be helpful in locating the
  slowest parts of an existing application.


pkgId: 40deeffa3accc34c5fc4cb99dfae1d9890677a882df61ec1e1935eb1cc8c6fe5
name: perl-Devel-Trace
arch: noarch
version: 0.11
epoch: 0
release: 1.el6
summary: Print out each line before it is executed (like sh -x)
url: http://search.cpan.org/dist/Devel-Trace/
rpm_license: Public Domain
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Devel-Trace-0.11-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Devel-Trace-0.11-1.el6.noarch.rpm
checksum_type: sha256
description:
  If you run your program with perl -d:Trace program, this module will print
  a message to standard error just before each line is executed.

  This is something like the shell's -x option.


pkgId: 42fa8fbeaf6d391b5b17b3a81c330935917538616b1e252bfe39c79c4f237666
name: perl-Device-SerialPort
arch: armv5tel
version: 1.04
epoch: 0
release: 5.el6
summary: Linux/POSIX emulation of Win32::SerialPort functions
url: http://search.cpan.org/dist/Device-SerialPort/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Device-SerialPort-1.04-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Device-SerialPort-1.04-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides an object-based user interface essentially identical
  to the one provided by the Win32::SerialPort module.


pkgId: c5172107ed67d97f1d3f21036c7edfad283f05e3c9e04d3be65e3323fb7bdeac
name: perl-Digest-Bcrypt
arch: noarch
version: 1.0.1
epoch: 0
release: 1.el6
summary: Perl interface to the bcrypt digest algorithm
url: http://search.cpan.org/dist/Digest-Bcrypt/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Digest-Bcrypt-1.0.1-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Digest-Bcrypt-1.0.1-1.el6.noarch.rpm
checksum_type: sha256
description:
  Provides an interface to the bcrypt digest algorithm.

  This module subclasses Digest::base and can be used either directly or
  through the Digest meta-module. Using the latter is recommended.

  It is mostly a wrapper around Crypt::Eksblowfish::Bcrypt.


pkgId: d110a8e7424164ba6a7830b169145b6010eed1d1670ab4260f51316fbc1578d9
name: perl-Digest-BubbleBabble
arch: noarch
version: 0.01
epoch: 0
release: 11.el6
summary: Create bubble-babble fingerprints
url: http://search.cpan.org/dist/Digest-BubbleBabble/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Digest-BubbleBabble-0.01-11.el6.src.rpm
location_href: perl-Digest-BubbleBabble-0.01-11.el6.noarch.rpm
checksum_type: sha256
description:
  Digest::BubbleBabble takes a message digest (generated by either of the MD5 or
  SHA-1 message digest algorithms) and creates a fingerprint of that digest in
  "bubble babble" format. Bubble babble is a method of representing a message
  digest as a string of "real" words, to make the fingerprint easier to remember.
  The "words" are not necessarily real words, but they look more like words than
  a string of hex characters.

  Bubble babble fingerprinting is used by the SSH2 suite (and, consequently, by
  Net::SSH::Perl, the Perl SSH implementation) to display easy-to-remember key
  fingerprints. The key (a DSA or RSA key) is converted into a textual form,
  digested using Digest::SHA1, and run through bubblebabble to create the key
  fingerprint.


pkgId: d35d7f128346a9c8a7fc1e9607b1fcae6d5379399cb96c07b67585b254ae92f0
name: perl-Digest-CRC
arch: armv5tel
version: 0.16
epoch: 0
release: 1.el6
summary: Generic CRC functions
url: http://search.cpan.org/dist/Digest-CRC
rpm_license: Public Domain
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Digest-CRC-0.16-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Digest-CRC-0.16-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Digest::CRC module calculates CRC sums of all sorts. It contains wrapper
  functions with the correct parameters for CRC-CCITT, CRC-16 and CRC-32.


pkgId: b62e6ea0c589705207649c09fb5672f356929104e3c596e6a68b73ddbe379a3c
name: perl-Digest-HMAC
arch: noarch
version: 1.01
epoch: 0
release: 22.el6
summary: Digest-HMAC Perl module
url: http://search.cpan.org/dist/Digest-HMAC/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Digest-HMAC-1.01-22.el6.src.rpm
location_href: perl-Digest-HMAC-1.01-22.el6.noarch.rpm
checksum_type: sha256
description:
  HMAC is used for message integrity checks between two parties that
  share a secret key, and works in combination with some other Digest
  algorithm, usually MD5 or SHA-1. The HMAC mechanism is described in
  RFC 2104.

  HMAC follow the common Digest:: interface, but the constructor takes
  the secret key and the name of some other simple Digest:: as argument.


pkgId: de1f0cf59f31d780eed2937f254d6d332ab90a88538c988c7738692409efc8d8
name: perl-Digest-JHash
arch: armv5tel
version: 0.10
epoch: 0
release: 1.el6
summary: Perl extension for 32 bit Jenkins Hashing Algorithm
url: http://search.cpan.org/dist/Digest-JHash/
rpm_license: Artistic 2.0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Digest-JHash-0.10-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Digest-JHash-0.10-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Digest::JHash module allows you to use the fast JHash hashing algorithm
  developed by Bob Jenkins from within Perl programs. The algorithm takes as
  input a message of arbitrary length and produces as output a 32-bit
  "message digest" of the input in the form of an unsigned long integer.


pkgId: d86cb44b04f01b80fffbf951e274baf8fbe46a93165abeccd8c3d3fab170fb24
name: perl-Digest-MD2
arch: armv5tel
version: 2.03
epoch: 0
release: 14.el6
summary: Perl interface to the MD2 Algorithm
url: http://search.cpan.org/dist/Digest-MD2/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Digest-MD2-2.03-14.el6.src.rpm
rpm_packager: Koji
location_href: perl-Digest-MD2-2.03-14.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Digest::MD2 module allows you to use the RSA Data Security Inc. MD2 Message
  Digest algorithm from within Perl programs. The algorithm takes as input a
  message of arbitrary length and produces as output a 128-bit "fingerprint" or
  "message digest" of the input.

  The Digest::MD2 programming interface is identical to the interface of
  Digest::MD5.


pkgId: 5816e9c8414d56c83148d76aa032e63940daf98fa535d1cc7fcb7a638d109d59
name: perl-Digest-MD4
arch: armv5tel
version: 1.5
epoch: 0
release: 10.el6
summary: Perl interface to the MD4 Algorithm
url: http://search.cpan.org/dist/Digest-MD4/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Digest-MD4-1.5-10.el6.src.rpm
rpm_packager: Koji
location_href: perl-Digest-MD4-1.5-10.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Digest::MD4 module allows you to use the RSA Data Security Inc. MD4 Message
  Digest algorithm from within Perl programs. The algorithm takes as input a
  message of arbitrary length and produces as output a 128-bit "fingerprint" or
  "message digest" of the input.


pkgId: f5ea7ff80493ad15f277619f4040c49517fd38d15b86b4bb380262a8e7c22973
name: perl-Digest-PBKDF2
arch: noarch
version: 0.010
epoch: 0
release: 1.el6
summary: Digest module using the PBKDF2 algorithm
url: http://search.cpan.org/dist/Digest-PBKDF2/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Digest-PBKDF2-0.010-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Digest-PBKDF2-0.010-1.el6.noarch.rpm
checksum_type: sha256
description:
  A minimalist Digest module using the PBKDF2 algorithm.  You can only use one
  salt, a pre-salt, with this module. It is not smart enough to do post-salts.


pkgId: 5c48df794e41391a102cff4f23a51a4edd7778dd49f75f00cc9ab5604102305e
name: perl-Digest-SHA
arch: armv5tel
version: 5.47
epoch: 1
release: 141.el6.1
summary: Perl extension for SHA-1/224/256/384/512
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Digest-SHA-5.47-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Digest::SHA is a complete implementation of the NIST Secure Hash
  Standard.  It gives Perl programmers a convenient way to calculate
  SHA-1, SHA-224, SHA-256, SHA-384, and SHA-512 message digests.  The
  module can handle all types of input, including partial-byte data.


pkgId: 0dc7db2ae4499a33764413f6df9903d9d6779eaa1ca0ebb048d98915904c2570
name: perl-Digest-SHA1
arch: armv5tel
version: 2.12
epoch: 0
release: 2.el6
summary: Digest-SHA1 Perl module
url: http://search.cpan.org/dist/Digest-SHA1/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Digest-SHA1-2.12-2.el6.src.rpm
location_href: perl-Digest-SHA1-2.12-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Digest::SHA1 module allows you to use the NIST SHA-1 message
  digest algorithm from within Perl programs. The algorithm takes as
  input a message of arbitrary length and produces as output a 160-bit
  "fingerprint" or "message digest" of the input.

  The Digest::SHA1 module provide a procedural interface for simple use,
  as well as an object oriented interface that can handle messages of
  arbitrary length and which can read files directly.

  A binary digest will be 20 bytes long. A hex digest will be 40
  characters long. A base64 digest will be 27 characters long.


pkgId: fe1259efb89641675d794046ab017aee71888779e5ee036147746e2c45cf7fc0
name: perl-Digest-SHA3
arch: armv5tel
version: 0.24
epoch: 0
release: 1.el6
summary: Perl extension for SHA-3
url: http://search.cpan.org/dist/Digest-SHA3/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Digest-SHA3-0.24-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Digest-SHA3-0.24-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  Digest::SHA3 is written in C for speed. If your platform lacks a C
  compiler, perhaps you can find the module in a binary form compatible with
  your particular processor and operating system.


pkgId: 004872df5e6c7d3e0937251e5f131ae2c47ca7dfa1156c17b07ec5976835109d
name: perl-Directory-Queue
arch: noarch
version: 1.9
epoch: 0
release: 1.el6
summary: Object oriented interface to a directory based queue
url: http://search.cpan.org/dist/Directory-Queue/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Directory-Queue-1.9-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Directory-Queue-1.9-1.el6.noarch.rpm
checksum_type: sha256
description:
  The goal of this module is to offer a simple queue system using the
  underlying file system for storage, security and to prevent race conditions
  via atomic operations. It focuses on simplicity, robustness and
  scalability.


pkgId: dd587dcd86dc600b3e30d973b014338ce545c0e68ba719928e740966a2a14c2c
name: perl-Email-Abstract
arch: noarch
version: 3.002
epoch: 0
release: 1.el6
summary: Unified interface to mail representations
url: http://search.cpan.org/dist/Email-Abstract/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Email-Abstract-3.002-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-Abstract-3.002-1.el6.noarch.rpm
checksum_type: sha256
description:
  "Email::Abstract" provides module writers with the ability to write
  representation-independent mail handling code. For instance, in the
  cases of "Mail::Thread" or "Mail::ListDetector", a key part of the code
  involves reading the headers from a mail object. Where previously one
  would either have to specify the mail class required, or to build a new
  object from scratch, "Email::Abstract" can be used to perform certain
  simple operations on an object regardless of its underlying
  representation.


pkgId: c54f9daf963f5e54f4972f8dbd7601c095802c91c0f156c8ee7b1f99cbb9aff1
name: perl-Email-Address
arch: noarch
version: 1.889
epoch: 0
release: 3.el6
summary: RFC 2822 Address Parsing and Creation
url: http://search.cpan.org/dist/Email-Address/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Email-Address-1.889-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Email-Address-1.889-3.el6.noarch.rpm
checksum_type: sha256
description:
  This class implements a complete RFC 2822 parser that locates email
  addresses in strings and returns a list of "Email::Address" objects
  found. Alternatley you may construct objects manually. The goal of this
  software is to be correct, and very very fast.


pkgId: e4e2b9be619653fd6fd048ed09bb4c4e3e9fcaa021c6117a87c64665d5eeef6a
name: perl-Email-Date
arch: noarch
version: 1.103
epoch: 0
release: 6.el6
summary: Find and format date headers
url: http://search.cpan.org/dist/Email-Date/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Email-Date-1.103-6.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-Date-1.103-6.el6.noarch.rpm
checksum_type: sha256
description:
  RFC 2822 defines the "Date:" header. It declares the header a required
  part of an email message. The syntax for date headers is clearly laid
  out. Stil, even a perfectly planned world has storms. The truth is, many
  programs get it wrong. Very wrong. Or, they don't include a "Date:"
  header at all. This often forces you to look elsewhere for the date, and
  hoping to find something.

  For this reason, the tedious process of looking for a valid date has
  been encapsulated in this software. Further, the process of creating RFC
  compliant date strings is also found in this software.


pkgId: d95eda4c5ed254f18f0d739949ce4b8af3dcbb30f3f7ca14ce483adab0b5598b
name: perl-Email-Find
arch: noarch
version: 0.10
epoch: 0
release: 4.el6
summary: Find RFC 822 email addresses in plain text
url: http://search.cpan.org/dist/Email-Find/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Email-Find-0.10-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-Find-0.10-4.el6.noarch.rpm
checksum_type: sha256
description:
  Email::Find is a module for finding a *subset* of RFC 822 email
  addresses in arbitrary text (see the section on "CAVEATS"). The
  addresses it finds are not guaranteed to exist or even actually be email
  addresses at all (see the section on "CAVEATS"), but they will be valid
  RFC 822 syntax.


pkgId: b91900780f110ff2a6444057f3a5da1f056583b8319e1a6803dbc52736d0d625
name: perl-Email-MIME-Attachment-Stripper
arch: noarch
version: 1.316
epoch: 0
release: 2.el6
summary: Strip the attachments from a mail message
url: http://search.cpan.org/dist/Email-MIME-Attachment-Stripper/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Email-MIME-Attachment-Stripper-1.316-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-MIME-Attachment-Stripper-1.316-2.el6.noarch.rpm
checksum_type: sha256
description:
  Given a Email::MIME object, detach all attachments from the message.
  These are then available separately.


pkgId: 8c38f45bee8919a5d0dc8cc0a52f09ccc8bf029a003313ed0191ef066b5ec438
name: perl-Email-MIME-ContentType
arch: noarch
version: 1.015
epoch: 0
release: 2.el6
summary: Parse a MIME Content-Type Header
url: http://search.cpan.org/dist/Email-MIME-ContentType/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Email-MIME-ContentType-1.015-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Email-MIME-ContentType-1.015-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module is responsible for parsing email content type headers
  according to section 5.1 of RFC 2045. It returns a hash as above, with
  entries for the discrete type, the composite type, and a hash of
  attributes.


pkgId: 50d49679934cc2407535b453e2f1e6928a901fc5e5a7896e2740f718d2089048
name: perl-Email-MIME-Encodings
arch: noarch
version: 1.313
epoch: 0
release: 2.el6
summary: Unified interface to MIME encoding and decoding
url: http://search.cpan.org/dist/Email-MIME-Encodings/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Email-MIME-Encodings-1.313-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-MIME-Encodings-1.313-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module simply wraps "MIME::Base64" and "MIME::QuotedPrint" so that
  you can throw the contents of a "Content-Transfer-Encoding" header at
  some text and have the right thing happen.


pkgId: c27d7008db0ce1f4d0b411e8b7ac2d21b97803be25c9410f3a26ba06d3b339cc
name: perl-Email-MIME-Modifier
arch: noarch
version: 1.444
epoch: 0
release: 1.el6
summary: Modify Email::MIME Objects Easily
url: http://search.cpan.org/dist/Email-MIME-Modifier/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Email-MIME-Modifier-1.444-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-MIME-Modifier-1.444-1.el6.noarch.rpm
checksum_type: sha256
description:
  Provides a number of useful methods for manipulating MIME messages.
  These method are declared in the "Email::MIME" namespace, and are used
  with "Email::MIME" objects.


pkgId: 2c352f0c127b88dc12a6d35ea285e1a8058a064786de111281bedfce28d996f8
name: perl-Email-MessageID
arch: noarch
version: 1.401
epoch: 0
release: 4.el6
summary: Generate world unique message-ids
url: http://search.cpan.org/dist/Email-MessageID/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Email-MessageID-1.401-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Email-MessageID-1.401-4.el6.noarch.rpm
checksum_type: sha256
description:
  Message-ids are optional, but highly recommended, headers that identify
  a message uniquely. This software generates a unique message-id.


pkgId: b1a12de7bdefe9d1719fc1d8df9b03a4b0fe5210300961ab69b348b68d6ad5fe
name: perl-Email-Simple
arch: noarch
version: 2.100
epoch: 0
release: 1.el6
summary: Simple parsing of RFC2822 message format and headers
url: http://search.cpan.org/dist/Email-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Email-Simple-2.100-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Email-Simple-2.100-1.el6.noarch.rpm
checksum_type: sha256
description:
  "Email::Simple" is the first deliverable of the "Perl Email Project", a
  reaction against the complexity and increasing bugginess of the
  "Mail::*" modules. In contrast, "Email::*" modules are meant to be
  simple to use and to maintain, pared to the bone, fast, minimal in their
  external dependencies, and correct.


pkgId: dac87b216249c009e5d6fce34a37f214727d817c1f52c70d21d74ebc3e0eaabe
name: perl-Email-Valid
arch: noarch
version: 0.184
epoch: 0
release: 1.el6
summary: Check validity of internet email address
url: http://search.cpan.org/dist/Email-Valid
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Email-Valid-0.184-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Email-Valid-0.184-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module determines whether an email address is well-formed, and optionally,
  whether a mail host exists for the domain or whether the top level domain of
  the email address is valid.


pkgId: cd7252690d7c1b9f722d71db6dd2a2589464d873a1d33665737d2828a56ff779
name: perl-Encode-Detect
arch: armv5tel
version: 1.01
epoch: 0
release: 2.el6
summary: Encode::Encoding subclass that detects the encoding of data
url: http://search.cpan.org/dist/Encode-Detect/
rpm_license: MPLv1.1 or GPLv2+ or LGPLv2+
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Encode-Detect-1.01-2.el6.src.rpm
location_href: perl-Encode-Detect-1.01-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  This Perl module is an Encode::Encoding subclass that uses
  Encode::Detect::Detector to determine the charset of the input data and then
  decodes it using the encoder of the detected charset.


pkgId: ac5f5e3de447009bb7821f5735ac5441a61c8aab237e44367d9f062a86151819
name: perl-Encode-DoubleEncodedUTF8
arch: noarch
version: 0.05
epoch: 0
release: 1.el6
summary: Fix double encoded UTF-8 bytes to the correct one
url: http://search.cpan.org/dist/Encode-DoubleEncodedUTF8/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Encode-DoubleEncodedUTF8-0.05-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Encode-DoubleEncodedUTF8-0.05-1.el6.noarch.rpm
checksum_type: sha256
description:
  Encode::DoubleEncodedUTF8 adds a new encoding utf-8-de and fixes
  double encoded utf-8 bytes found in the original bytes to the correct
  Unicode entity.


pkgId: 1cbf51a38feabbd9c792d79b0eedf90e0122776b21e94a6c7ec8b3d2338f828a
name: perl-Encode-HanExtra
arch: armv5tel
version: 0.23
epoch: 0
release: 3.el6
summary: Extra sets of Chinese encodings
url: http://search.cpan.org/dist/Encode-HanExtra/
rpm_license: MIT
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Encode-HanExtra-0.23-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Encode-HanExtra-0.23-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  Perl 5.7.3 and later ships with an adequate set of Chinese encodings,
  including the commonly used CP950, CP936 (also known as GBK), Big5 (alias
  for Big5-Eten), Big5-HKSCS, EUC-CN, HZ, and ISO-IR-165.
  However, the numbers of Chinese encodings are staggering, and a complete
  coverage will easily increase the size of perl distribution by several
  megabytes; hence, this CPAN module tries to provide the rest of them.
  If you are using Perl 5.8 or later, Encode::CN and Encode::TW will
  automatically load the extra encodings for you, so there's no need to
  explicitly write use Encode::HanExtra if you are using one of them already.


pkgId: 087b83a53b3bcbaefe8f3ca22b3d729c8e2eb9be7af7987a7cc4713f8381d6de
name: perl-Encode-Locale
arch: noarch
version: 1.03
epoch: 0
release: 5.el6
summary: Determine the locale encoding
url: http://search.cpan.org/dist/Encode-Locale/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Encode-Locale-1.03-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Encode-Locale-1.03-5.el6.noarch.rpm
checksum_type: sha256
description:
  In many applications it's wise to let Perl use Unicode for the strings
  it processes.  Most of the interfaces Perl has to the outside world is
  still byte based.  Programs therefore needs to decode byte strings
  that enter the program from the outside and encode them again on the
  way out.


pkgId: 7e6a5989aef9dfd9d2ac38346011e78a33df5c019e61cbafb4ba5c1fc7b2b7bd
name: perl-Error
arch: noarch
version: 0.17015
epoch: 1
release: 4.el6
summary: Error/exception handling in an OO-ish way
url: http://search.cpan.org/dist/Error/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Error-0.17015-4.el6.src.rpm
location_href: perl-Error-0.17015-4.el6.noarch.rpm
checksum_type: sha256
description:
  The Error package provides two interfaces. Firstly Error provides a
  procedural interface to exception handling. Secondly Error is a base class
  for errors/exceptions that can either be thrown, for subsequent catch, or
  can simply be recorded.


pkgId: 85ef133a7ba5f441cacb032790d948ac66587f16fbc8ac8c01c3396375bace0a
name: perl-Eval-Closure
arch: noarch
version: 0.08
epoch: 0
release: 4.el6
summary: Safely and cleanly create closures via string eval
url: http://search.cpan.org/dist/Eval-Closure/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Eval-Closure-0.08-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Eval-Closure-0.08-4.el6.noarch.rpm
checksum_type: sha256
description:
  String eval is often used for dynamic code generation. For instance, Moose uses
  it heavily, to generate inlined versions of accessors and constructors, which
  speeds code up at runtime by a significant amount. String eval is not without
  its issues however - it's difficult to control the scope it's used in (which
  determines which variables are in scope inside the eval), and it's easy to miss
  compilation errors, since eval catches them and sticks them in $@ instead.

  This module attempts to solve these problems. It provides an eval_closure
  function, which evals a string in a clean environment, other than a fixed list
  of specified variables. Compilation errors are rethrown automatically.


pkgId: 40c85c67bf95989920a7bf56b85fe107e5207c704f19d5e8f48a2fe762377856
name: perl-Event
arch: armv5tel
version: 1.13
epoch: 0
release: 1.el6
summary: Event loop processing
url: http://search.cpan.org/dist/Event/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Event-1.13-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Event-1.13-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Event module provide a central facility to watch for various types of
  events and invoke a callback when these events occur. The idea is to delay the
  handling of events so that they may be dispatched in priority order when it is
  safe for callbacks to execute.


pkgId: 66e6535218d04a783bb86c1175d70f5cd05e65daa38de5ece8d4719dc67b496b
name: perl-Event-Lib
arch: armv5tel
version: 1.03
epoch: 0
release: 8.el6
summary: Perl wrapper around libevent
url: http://search.cpan.org/dist/Event-Lib/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp11_alw002
rpm_sourcerpm: perl-Event-Lib-1.03-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-Event-Lib-1.03-8.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module is a Perl wrapper around libevent(3) as available from
  http://monkey.org/~provos/libevent/.  It allows to execute a function
  whenever a given event on a filehandle happens, a timeout occurs or a signal is
  received.


pkgId: c021cd7460aa5924c89b3680a5d9976935bb5910715ce07e316de072bd306aca
name: perl-Exception-Base
arch: noarch
version: 0.2401
epoch: 0
release: 1.el6
summary: Lightweight exceptions
url: http://search.cpan.org/dist/Exception-Base/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Exception-Base-0.2401-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Exception-Base-0.2401-1.el6.noarch.rpm
checksum_type: sha256
description:
  This class implements a fully OO exception mechanism similar to
  Exception::Class or Class::Throwable. It provides a simple interface
  allowing programmers to declare exception classes. These classes can be
  thrown and caught. Each uncaught exception prints full stack trace if the
  default verbosity is uppered for debugging purposes.


pkgId: 18e83b7329c9083f791f7ddf9feccbf46999d007235b22c38a2dda1f0e121935
name: perl-Exception-Class
arch: noarch
version: 1.29
epoch: 0
release: 1.1.el6
summary: Module that allows you to declare real exception classes in Perl
url: http://search.cpan.org/dist/Exception-Class/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Exception-Class-1.29-1.1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Exception-Class-1.29-1.1.el6.noarch.rpm
checksum_type: sha256
description:
  Exception::Class allows you to declare exception hierarchies in your
  modules in a "Java-esque" manner.


pkgId: 734e86a61923a47988d59d6b9c3388e16ee1284e9babfc80cae85b6df0ae6567
name: perl-Exception-Class-TryCatch
arch: noarch
version: 1.12
epoch: 0
release: 9.el6
summary: Syntactic try/catch sugar for use with Exception::Class
url: http://search.cpan.org/dist/Exception-Class-TryCatch/
rpm_license: ASL 2.0
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Exception-Class-TryCatch-1.12-9.el6.src.rpm
rpm_packager: Koji
location_href: perl-Exception-Class-TryCatch-1.12-9.el6.noarch.rpm
checksum_type: sha256
description:
  Exception::Class::TryCatch provides syntactic sugar for use with
  Exception::Class using the familiar keywords try and catch. Its primary
  objective is to allow users to avoid dealing directly with $@ by ensuring
  that any exceptions caught in an eval are captured as Exception::Class
  objects, whether they were thrown objects to begin with or whether the
  error resulted from die. This means that users may immediately use isa and
  various Exception::Class methods to process the exception.


pkgId: 1b2f7451dd1085533c5284539f6ccb5886d66b52ff81e14fe3722a738b247692
name: perl-Expect
arch: noarch
version: 1.21
epoch: 0
release: 3.el6
summary: Expect for Perl
url: http://search.cpan.org/dist/Expect/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Expect-1.21-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Expect-1.21-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides Expect-like functionality to Perl.  Expect is
  a tool for automating interactive applications such as telnet, ftp,
  passwd, fsck, rlogin, tip, etc.


pkgId: 7de698c54a99990d91eb37093247b4d545382e16d145268e04b0350a5e009571
name: perl-Expect-Simple
arch: noarch
version: 0.04
epoch: 0
release: 4.el6
summary: Wrapper around the Expect module
url: http://search.cpan.org/dist/Expect-Simple/
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Expect-Simple-0.04-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Expect-Simple-0.04-4.el6.noarch.rpm
checksum_type: sha256
description:
  Expect::Simple is a wrapper around the Expect module which should
  suffice for simple applications. It hides most of the Expect
  machinery; the Expect object is available for tweaking if need be.


pkgId: 83430a6112eaadc78428a1fcb1d02c5783cbc9b653de103ce550fb49625b3b39
name: perl-Exporter-Tiny
arch: noarch
version: 0.036
epoch: 0
release: 2.el6
summary: An exporter with the features of Sub::Exporter but only core dependencies
url: http://search.cpan.org/dist/Exporter-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Exporter-Tiny-0.036-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Exporter-Tiny-0.036-2.el6.noarch.rpm
checksum_type: sha256
description:
  Exporter::Tiny supports many of Sub::Exporter's external-facing features
  including renaming imported functions with the -as, -prefix and -suffix
  options; explicit destinations with the into option; and alternative
  installers with the installer option. But it's written in only about 40%
  as many lines of code and with zero non-core dependencies.

  Its internal-facing interface is closer to Exporter.pm, with configuration
  done through the @EXPORT, @EXPORT_OK and %EXPORT_TAGS package variables.

  Exporter::Tiny performs most of its internal duties (including resolution of
  tag names to sub names, resolution of sub names to coderefs, and installation
  of coderefs into the target package) as method calls, which means they can be
  overridden to provide interesting behavior.


pkgId: df90a0e7576af1b8525b3e9419d22efc523b2260777f72db5e35ad9b30720915
name: perl-ExtUtils-AutoInstall
arch: noarch
version: 0.63
epoch: 0
release: 10.el6
summary: Automatic install of dependencies via CPAN
url: http://search.cpan.org/dist/ExtUtils-AutoInstall/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-ExtUtils-AutoInstall-0.63-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-ExtUtils-AutoInstall-0.63-10.el6.noarch.rpm
checksum_type: sha256
description:
  ExtUtils::AutoInstall lets module writers specify a more sophisticated
  form of dependency information than the PREREQ_PM option offered by
  ExtUtils::MakeMaker.


pkgId: 860ac55419a89dbd15e981d2fb60c65fd93399b9b35dbb9419a6f0dff84204fc
name: perl-ExtUtils-CBuilder
arch: armv5tel
version: 0.27
epoch: 1
release: 141.el6.1
summary: Compile and link C code for Perl modules
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-ExtUtils-CBuilder-0.27-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  This module can build the C portions of Perl modules by invoking the
  appropriate compilers and linkers in a cross-platform manner. It was
  motivated by the Module::Build project, but may be useful for other
  purposes as well.


pkgId: 3347918514d9c24a11c969b0e70d783c196d20b4b16c18c1253f41e1fe6f970b
name: perl-ExtUtils-CChecker
arch: noarch
version: 0.04
epoch: 0
release: 1.el6
summary: Configure-time utilities for using C headers, libraries, or OS features
url: http://search.cpan.org/dist/ExtUtils-CChecker/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-ExtUtils-CChecker-0.04-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-ExtUtils-CChecker-0.04-1.el6.noarch.rpm
checksum_type: sha256
description:
  Often Perl modules are written to wrap functionality found in existing C
  headers, libraries, or to use OS-specific features. It is useful in the
  Build.PL or Makefile.PL file to check for the existence of these
  requirements before attempting to actually build the module.


pkgId: 9d16fdc8cc28e72b9c5a566b2d21fff04525eca645ea3b5a60df0479ecb971d9
name: perl-ExtUtils-Depends
arch: noarch
version: 0.302
epoch: 0
release: 1.el6
summary: Easily build XS extensions that depend on XS extensions
url: http://search.cpan.org/dist/ExtUtils-Depends/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-ExtUtils-Depends-0.302-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-ExtUtils-Depends-0.302-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module tries to make it easy to build Perl extensions that use
  functions and typemaps provided by other perl extensions. This means that a
  perl extension is treated like a shared library that provides also a C and
  an XS interface besides the perl one.


pkgId: bcb3f24ead0a1d5f4fa567bdd06b5d60e7fe4cc8428336da835f8c7fb6d59a80
name: perl-ExtUtils-F77
arch: noarch
version: 1.16
epoch: 0
release: 5.el6
summary: Simple interface to F77 libs
url: http://search.cpan.org/dist/ExtUtils-F77/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-ExtUtils-F77-1.16-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-ExtUtils-F77-1.16-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module tries to figure out how to link C programs with Fortran
  subroutines on your system. Basically one must add a list of Fortran
  runtime libraries. The problem is their location and name varies with each
  OS/compiler combination!


pkgId: 467cb46d542c3051e0bc3cdf302132e1643b5c4338de136ae932c9dfbc6d3805
name: perl-ExtUtils-InstallPaths
arch: noarch
version: 0.009
epoch: 0
release: 3.el6
summary: Build.PL install path logic made easy
url: https://metacpan.org/release/ExtUtils-InstallPaths
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-ExtUtils-InstallPaths-0.009-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-ExtUtils-InstallPaths-0.009-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module tries to make install path resolution as easy as possible.

  When you want to install a module, it needs to figure out where to install
  things. The nutshell version of how this works is that default installation
  locations are determined from ExtUtils::Config, and they may be individually
  overridden by using the install_path attribute. An install_base attribute lets
  you specify an alternative installation root like /home/foo and prefix does
  something similar in a rather different (and more complicated) way. destdir
  lets you specify a temporary installation directory like /tmp/install in case
  you want to create bundled-up installable packages.


pkgId: 319f4d4ea1dd1a59dcc0cb625dd91395a67094f125c7754f8711a1384c2432c4
name: perl-ExtUtils-MakeMaker-Coverage
arch: noarch
version: 0.05
epoch: 0
release: 8.el6
summary: Allows perl modules to check test coverage with Devel::Cover
url: http://search.cpan.org/dist/ExtUtils-MakeMaker-Coverage/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-ExtUtils-MakeMaker-Coverage-0.05-8.el6.src.rpm
location_href: perl-ExtUtils-MakeMaker-Coverage-0.05-8.el6.noarch.rpm
checksum_type: sha256
description:
  This module adds an additional target to the Makefile generated by
  ExtUtils::MakeMaker. The target, testcover, calls cover, the
  command-line script to generate test coverage statistics, to clean up
  any data from a previous run. It then runs the tests, as if make test
  was run, then calls cover again to generate the coverage statistics.


pkgId: 5ac2ae583965aed14f2c0e03565bf94c13a13e9369789fa2b708d6fa29e08e0b
name: perl-ExtUtils-ParseXS
arch: armv5tel
version: 2.2003.0
epoch: 1
release: 141.el6.1
summary: Module and a script for converting Perl XS code into C code
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-ExtUtils-ParseXS-2.2003.0-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  ExtUtils::ParseXS will compile XS code into C code by embedding the
  constructs necessary to let C functions manipulate Perl values and
  creates the glue necessary to let Perl access those functions.


pkgId: fa18bad46dbde2d6118858e2aa97feb0bf74dff98e7c77ca164a91acafb0f740
name: perl-ExtUtils-PkgConfig
arch: noarch
version: 1.12
epoch: 0
release: 3.el6
summary: Simplistic interface to pkg-config
url: http://search.cpan.org/dist/ExtUtils-PkgConfig/
rpm_license: LGPLv2+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-ExtUtils-PkgConfig-1.12-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-ExtUtils-PkgConfig-1.12-3.el6.noarch.rpm
checksum_type: sha256
description:
  The pkg-config program retrieves information about installed libraries,
  usually for the purposes of compiling against and linking to them.

  ExtUtils::PkgConfig is a very simplistic interface to this utility,
  intended for use in the Makefile.PL of perl extensions which bind
  libraries that pkg-config knows. It is really just boilerplate code
  that you would've written yourself.


pkgId: 7f05728367659b276c9c720a9844d925c662808b6e0b549c80b7683b31462053
name: perl-ExtUtils-XSBuilder
arch: noarch
version: 0.28
epoch: 0
release: 6.el6
summary: Modules that parse C header files and create XS glue code
url: http://search.cpan.org/dist/ExtUtils-XSBuilder/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-ExtUtils-XSBuilder-0.28-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-ExtUtils-XSBuilder-0.28-6.el6.noarch.rpm
checksum_type: sha256
description:
  ExtUtils::XSBuilder is a set of modules to parse C header files and create
  XS glue code and documentation out of it. Ideally this allows one to "write"
  an interface to a C library without coding a line. Since no C-API is ideal,
  some adjuments are necessary most of the time. So to use this module you
  must still be familiar with C and XS programming, but it removes a lot of
  stupid work and copy&paste from you. Also when the C API changes, most
  of the time you only have to rerun XSBuilder to get your new Perl API.


pkgId: bbb5602b967f4842296de87cab4b1d56c959a9d2b5b6090ea1e519aa3bee82ec
name: perl-FCGI-ProcManager
arch: noarch
version: 0.19
epoch: 0
release: 6.el6
summary: A FastCGI process manager
url: http://search.cpan.org/dist/FCGI-ProcManager
rpm_license: LGPLv2+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-FCGI-ProcManager-0.19-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-FCGI-ProcManager-0.19-6.el6.noarch.rpm
checksum_type: sha256
description:
  FCGI::ProcManager is used to serve as a FastCGI process manager. By
  reimplementing it in perl, developers can more finely tune performance
  in their web applications, and can take advantage of copy-on-write
  semantics prevalent in UNIX kernel process management.


pkgId: 78c7b60cd4e59049f1dd990592619e6688d9ff58533298e3fdaccac132c49c02
name: perl-File-BaseDir
arch: noarch
version: 0.03
epoch: 0
release: 13.el6
summary: Use the freedesktop basedir spec
url: http://search.cpan.org/dist/File-BaseDir/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-File-BaseDir-0.03-13.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-BaseDir-0.03-13.el6.noarch.rpm
checksum_type: sha256
description:
  This module can be used to find directories and files as specified by the
  XDG Base Directory Specification. It takes care of defaults and uses
  File::Spec to make the output platform specific.


pkgId: 114780e9956ffcbfaea8a6260e8ae57b0cba2e4d8d5cdad307bf240ed049bb14
name: perl-File-Comments
arch: noarch
version: 0.08
epoch: 0
release: 1.el6
summary: Recognizes file formats and extracts format-specific comments
url: http://search.cpan.org/dist/File-Comments/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-File-Comments-0.08-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Comments-0.08-1.el6.noarch.rpm
checksum_type: sha256
description:
  File::Comments guesses the type of a given file, determines the format
  used for comments, extracts all comments, and returns them as a
  reference to an array of chunks. Alternatively, it strips all comments
  from a file.

  Currently supported are Perl scripts, C/C++ programs, Java, makefiles,
  JavaScript, Python and PHP.


pkgId: 769ebaa80d4ef477e99919add4f1ccddaed23677a0c7e2133894246fc8d905c0
name: perl-File-ConfigDir
arch: noarch
version: 0.015
epoch: 0
release: 1.el6
summary: Get directories of configuration files
url: http://search.cpan.org/dist/File-ConfigDir/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-ConfigDir-0.015-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-ConfigDir-0.015-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a helper for installing, reading and finding configuration
  file locations. It's intended to work in every supported Perl5 environment
  and will always try to Do The Right Thing(TM).


pkgId: 0fec21e281107bc26b1de7bfe7619d595d9255cc3010a052ba2e727752f29e08
name: perl-File-Copy-Recursive
arch: noarch
version: 0.38
epoch: 0
release: 4.el6
summary: Extension for recursively copying files and directories
url: http://search.cpan.org/dist/File-Copy-Recursive/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-File-Copy-Recursive-0.38-4.el6.src.rpm
location_href: perl-File-Copy-Recursive-0.38-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module copies and moves directories recursively to an optional depth and
  attempts to preserve each file or directory's mode.


pkgId: 67cceb76c73b28af13d9d754276deb8e0db363da4ea470e203256b00060027eb
name: perl-File-DesktopEntry
arch: noarch
version: 0.08
epoch: 0
release: 1.el6
summary: Object to handle .desktop files
url: http://search.cpan.org/dist/File-DesktopEntry/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-DesktopEntry-0.08-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-DesktopEntry-0.08-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module is used to work with .desktop files. The format of these files
  is specified by the freedesktop "Desktop Entry" specification. This module
  can parse these files but also knows how to run the applications defined by
  these files. For this module version 1.0 of the specification was used.


pkgId: bf12cee68e5024de95f02a3c30860f73f6e63ac41f5efce1e36c7002388a48c2
name: perl-File-Edit-Portable
arch: noarch
version: 1.24
epoch: 0
release: 1.el6
summary: Read and write files while keeping the original line-endings intact
url: http://search.cpan.org/dist/File-Edit-Portable/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-Edit-Portable-1.24-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Edit-Portable-1.24-1.el6.noarch.rpm
checksum_type: sha256
description:
  The default behavior of perl is to read and write files using the
  Operating System's (OS) default record separator (line ending). If you open
  a file on an OS where the record separators are that of another OS, things
  can and do break.


pkgId: 23d13fb2f5a3b772d05b86c84de0c5fb62787d6704513e90b7b6e4097796f2f1
name: perl-File-FcntlLock
arch: armv5tel
version: 0.12
epoch: 0
release: 1.el6
summary: Perl module for file locking with fcntl
url: http://search.cpan.org/dist/File-FcntlLock/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-FcntlLock-0.12-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-FcntlLock-0.12-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  FcntlLock is a module to do file locking in an object oriented
  fashion using the fcntl(2) system call. This allows locks on parts
  of a file as well as on the whole file and overcomes some known
  problems with flock(2), on which Perl's flock() function is based.


pkgId: 5f5be00c61dc400f6014e4f044a910a18a30d773e1006f9ffad1469aa832b415
name: perl-File-Find-Rule
arch: noarch
version: 0.30
epoch: 0
release: 9.el6
summary: Perl module implementing an alternative interface to File::Find
url: http://search.cpan.org/dist/File-Find-Rule/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-File-Find-Rule-0.30-9.el6.src.rpm
location_href: perl-File-Find-Rule-0.30-9.el6.noarch.rpm
checksum_type: sha256
description:
  File::Find::Rule is a friendlier interface to File::Find.  It allows
  you to build rules which specify the desired files and directories.


pkgId: 542f867557201ff4b3ed616bcd88364916263541cdc9ad61b86a5665b9796f5a
name: perl-File-Find-Rule-Age
arch: noarch
version: 0.302
epoch: 0
release: 3.el6
summary: Rule to match on file age
url: http://search.cpan.org/dist/File-Find-Rule-Age/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-File-Find-Rule-Age-0.302-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Find-Rule-Age-0.302-3.el6.noarch.rpm
checksum_type: sha256
description:
  File::Find::Rule::Age makes it easy to search for files based on their age.
  DateTime and File::stat are used to do the behind the scenes work, with
  File::Find::Rule doing the Heavy Lifting.


pkgId: 80ced6b5e3efe48e049a68a96af3dabf919d03c9eaa9e51320a39257eea7622a
name: perl-File-FindLib
arch: noarch
version: 0.001004
epoch: 0
release: 1.el6
summary: Find and use a file/directory from a directory above your script file
url: http://search.cpan.org/dist/File-FindLib/
rpm_license: Unlicense
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-File-FindLib-0.001004-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-FindLib-0.001004-1.el6.noarch.rpm
checksum_type: sha256
description:
  File::FindLib starts in the directory where your script (or library) is
  located and looks for the file or directory whose name you pass in. If it
  isn't found, then FindLib looks in the parent directory and continues
  moving up parent directories until it finds it or until there is not
  another parent directory.


pkgId: e7576417d8be694ca7a737854009c7d5d4ad2c946bf29966b4302572f0f8f6bc
name: perl-File-Finder
arch: noarch
version: 0.53
epoch: 0
release: 3.el6
summary: Nice wrapper for File::Find ala find(1)
url: http://search.cpan.org/dist/File-Finder/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-File-Finder-0.53-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Finder-0.53-3.el6.noarch.rpm
checksum_type: sha256
description:
  File::Find is great, but constructing the wanted routine can sometimes be a
  pain. This module provides a wanted-writer, using syntax that is directly
  mappable to the find command's syntax.


pkgId: f62f60a72febbac2b401b7a134dbf9c8598f8b750310363aed999c6acb261f12
name: perl-File-HomeDir
arch: noarch
version: 0.86
epoch: 0
release: 3.el6
summary: Get the home directory for yourself or other users
url: http://search.cpan.org/dist/File-HomeDir/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-File-HomeDir-0.86-3.el6.src.rpm
location_href: perl-File-HomeDir-0.86-3.el6.noarch.rpm
checksum_type: sha256
description:
  File::HomeDir is a module for dealing with issues relating to the
  location of directories for various purposes that are "owned" by a
  user, and to solve these problems consistently across a wide variety
  of platforms.


pkgId: f76d70187bb77dae459a987f60b553fd81e376ab78bac26941aba91515a71c60
name: perl-File-Inplace
arch: noarch
version: 0.20
epoch: 0
release: 1.el6
summary: Perl module for in-place editing of files
url: http://search.cpan.org/dist/File-Inplace/
rpm_license: (GPL+ or Artistic)
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-File-Inplace-0.20-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-Inplace-0.20-1.el6.noarch.rpm
checksum_type: sha256
description:
  File::Inplace is a perl module intended to ease the common task of editing
  a file in-place. Inspired by variations of perl's -i option, this module is
  intended for somewhat more structured and reusable editing than command
  line perl typically allows. File::Inplace endeavors to guarantee file
  integrity; that is, either all of the changes made will be saved to the
  file, or none will. It also offers functionality such as backup creation,
  automatic field splitting per-line, automatic chomping/unchomping, and
  aborting edits partially through without affecting the original file.


pkgId: f15f05def3d89a87b11c322a26abeba7ccd5e61c6c1f7a52d1de69ce7f9e11ba
name: perl-File-KeePass
arch: noarch
version: 2.03
epoch: 0
release: 10.el6
summary: Interface to KeePass V1 and V2 database files
url: http://search.cpan.org/dist/File-KeePass/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-File-KeePass-2.03-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-KeePass-2.03-10.el6.noarch.rpm
checksum_type: sha256
description:
  File::KeePass gives access to KeePass version 1 (kdb) and
  version 2 (kdbx) databases.

  The version 1 and version 2 databases are very different
  in construction, but the majority of information overlaps
  and many algorithms are similar. File::KeePass attempts to
  iron out as many of the differences.

  File::KeePass gives nearly raw data access. There are a few
   utility methods for manipulating groups and entries. More
  advanced manipulation can easily be layered on top by
  other modules.

  File::KeePass is only used for reading and writing databases
  and for keeping passwords scrambled while in memory.
  Programs dealing with UI or using of auto-type features are
  the domain of other modules on CPAN. File::KeePass::Agent
  is one example.


pkgId: 296b495ebdf892374b91eda20bf6d91bc294419b0a09113b1c145c5bf35bd548
name: perl-File-MMagic-XS
arch: armv5tel
version: 0.09006
epoch: 0
release: 1.el6
summary: Guess file type with XS
url: http://search.cpan.org/dist/File-MMagic-XS
rpm_license: ASL 2.0 and (GPL+ or Artistic)
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-File-MMagic-XS-0.09006-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-MMagic-XS-0.09006-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  This is a port of Apache2 mod_mime_magic.c in Perl, written in XS with the aim
  of being efficient and fast especially for applications that need to be run for
  an extended amount of time.


pkgId: 2002fec95ae7619c7ad7a8b042ff2fa42efbc68ba4634889fa5adfe8695b4f46
name: perl-File-MimeInfo
arch: noarch
version: 0.25
epoch: 0
release: 1.el6
summary: Determine file type and open application
url: http://search.cpan.org/dist/File-MimeInfo/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-File-MimeInfo-0.25-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-MimeInfo-0.25-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module can be used to determine the mime type of a file. It tries to
  implement the freedesktop specification for a shared MIME database.


pkgId: 3ac2f8cc585a8d075bfa83f39abaa1af1212f9f885379e6d0e91dc0d84da90f1
name: perl-File-Modified
arch: noarch
version: 0.07
epoch: 0
release: 7.el6
summary: Checks intelligently if files have changed
url: http://search.cpan.org/dist/File-Modified/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-File-Modified-0.07-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Modified-0.07-7.el6.noarch.rpm
checksum_type: sha256
description:
  The Modified module is intended as a simple method for programs to detect
  whether configuration files (or modules they rely on) have changed. There
  are currently two methods of change detection implemented, mtime and MD5.
  The MD5 method will fall back to use timestamps if the Digest::MD5 module
  cannot be loaded.


pkgId: 92763427afdb9989f228157c05c06ae1dc4baa94f21f9dcca7770afa4f2f0b51
name: perl-File-NFSLock
arch: noarch
version: 1.21
epoch: 0
release: 10.el6
summary: Perl module to do NFS (or not) locking
url: http://search.cpan.org/dist/File-NFSLock
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-NFSLock-1.21-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-NFSLock-1.21-10.el6.noarch.rpm
checksum_type: sha256
description:
  Program based of concept of hard linking of files being atomic across NFS.
  This concept was mentioned in Mail::Box::Locker (which was originally
  presented in Mail::Folder::Maildir). Some routine flow is taken from
  there -- particularly the idea of creating a random local file, hard
  linking a common file to the local file, and then checking the nlink
  status. Some ideologies were not complete (uncache mechanism, shared
  locking) and some coding was even incorrect (wrong stat index).
  File::NFSLock was written to be light, generic, and fast.


pkgId: c966834e005ec6d51633478667590181b9b7d6439f4484d50cdf302642a6401d
name: perl-File-Next
arch: noarch
version: 1.06
epoch: 0
release: 2.el6
summary: File::Next Perl module
url: http://search.cpan.org/dist/File-Next/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-File-Next-1.06-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-Next-1.06-2.el6.noarch.rpm
checksum_type: sha256
description:
  File::Next is an iterator-based module for finding files.  It's
  lightweight, has no dependencies, runs under taint mode, and puts your
  program more directly in control of file selection.


pkgId: 6c05f9ffde4232927e0d9f6e460a516ea98fffb5dcd43f04f217cb381b952979
name: perl-File-Path-Tiny
arch: noarch
version: 0.5
epoch: 0
release: 1.el6
summary: Recursive versions of mkdir() and rmdir() without as much overhead as File::Path
url: http://search.cpan.org/dist/File-Path-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-File-Path-Tiny-0.5-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-Path-Tiny-0.5-1.el6.noarch.rpm
checksum_type: sha256
description:
  The goal here is simply to provide recursive versions of mkdir() and
  rmdir() with as little code and overhead as possible.


pkgId: d36188beaa2a1e61c439e233501ef6b5a4e60546ccff9cd7f95591b4a082baf5
name: perl-File-Pid
arch: noarch
version: 1.01
epoch: 0
release: 2.el6
summary: Pid File Manipulation
url: http://search.cpan.org/dist/File-Pid/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-File-Pid-1.01-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-Pid-1.01-2.el6.noarch.rpm
checksum_type: sha256
description:
  This software manages a pid file for you. It will create a pid file,
  query the process within to discover if it's still running, and remove
  the pid file.


pkgId: d2450f08674cd71cc9cf62903c2cb099a3dbd1752c6cc3ecb83eb7fe51793641
name: perl-File-ReadBackwards
arch: noarch
version: 1.04
epoch: 0
release: 7.el6
summary: File::ReadBackwards Perl module
url: http://search.cpan.org/dist/File-ReadBackwards/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-File-ReadBackwards-1.04-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-ReadBackwards-1.04-7.el6.noarch.rpm
checksum_type: sha256
description:
  This module reads a file backwards line by line. It is simple to use,
  memory efficient and fast. It supports both an object and a tied handle
  interface.


pkgId: 8e5c4b2bf6ac80e681fce4c56e86e826410d32220bc8693abd1bcd317be57185
name: perl-File-RsyncP
arch: armv5tel
version: 0.68
epoch: 0
release: 6.el6
summary: A perl implementation of an Rsync client
url: http://search.cpan.org/dist/File-RsyncP/
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-File-RsyncP-0.68-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-RsyncP-0.68-6.el6.armv5tel.rpm
checksum_type: sha256
description:
  File::RsyncP is a perl implementation of an Rsync client. It is compatible with
  Rsync 2.5.5 - 2.6.3 (protocol versions 26-28). It can send or receive files,
  either by running rsync on the remote machine, or connecting to an rsyncd
  daemon on the remote machine.


pkgId: 66811f770b5c3812f6279ea3d7fe5762f82237e8b88e879fb7fc5b1c369bce28
name: perl-File-ShareDir
arch: noarch
version: 1.00
epoch: 0
release: 4.el6
summary: Locate per-dist and per-module shared files
url: http://search.cpan.org/dist/File-ShareDir/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-File-ShareDir-1.00-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-ShareDir-1.00-4.el6.noarch.rpm
checksum_type: sha256
description:
  The intent of File::ShareDir is to provide a companion to Class::Inspector
  and File::HomeDir, modules that take a process that is well-known by
  advanced Perl developers but gets a little tricky, and make it more
  available to the larger Perl community.


pkgId: f2dc8c5cb27f9dacd22c5faa4599c8eae0f29b3ac2aab9659fd58cf8c1b5a31f
name: perl-File-Slurp
arch: noarch
version: 9999.13
epoch: 0
release: 7.el6
summary: Efficient Reading/Writing of Complete Files
url: http://search.cpan.org/dist/File-Slurp/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-File-Slurp-9999.13-7.el6.src.rpm
location_href: perl-File-Slurp-9999.13-7.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides subs that allow you to read or write entire files with
  one simple call. They are designed to be simple to use, have flexible ways
  to pass in or get the file contents and to be very efficient. There is also
  a sub to read in all the files in a directory other than . and ..

  These slurp/spew subs work for files, pipes and sockets, and stdio,
  pseudo-files, and DATA.


pkgId: 6511b88f102253e99991f273f8b9c703a3968f94e4261af19d026311a20cf126
name: perl-File-Spec-Native
arch: noarch
version: 1.003
epoch: 0
release: 1.el6
summary: Use native OS implementation of File::Spec from a subclass
url: http://search.cpan.org/dist/File-Spec-Native/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-File-Spec-Native-1.003-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Spec-Native-1.003-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a stupid hack to make the default File::Spec behavior
  available from a subclass. This can be useful when using another module
  that expects a subclass of File::Spec but you want to use the current,
  native OS format (automatically detected by File::Spec).


pkgId: 6761cdb38189e1a6d7947d09cfc47c25bbe380ae1b2d32be115c920c5741eaf7
name: perl-File-Tail
arch: noarch
version: 0.99.3
epoch: 0
release: 8.el6
summary: Perl extension for reading from continously updated files
url: http://search.cpan.org/dist/File-Tail/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp8_alw002
rpm_sourcerpm: perl-File-Tail-0.99.3-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-Tail-0.99.3-8.el6.noarch.rpm
checksum_type: sha256
description:
  The primary purpose of File::Tail is reading and analysing log files
  while they are being written, which is especially useful if you are
  monitoring the logging process with a tool like Tobias Oetiker's MRTG.


pkgId: 436fc48ad6322522876f05304cccdb85547632cc01ba730a942a99cc21caab26
name: perl-File-Tempdir
arch: noarch
version: 0.02
epoch: 0
release: 1.el6
summary: Object interface for File::Temp module
url: http://search.cpan.org/dist/File-Tempdir/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-File-Tempdir-0.02-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Tempdir-0.02-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provide an object interface to tempdir() from File::Temp. This
  allow to destroy the temporary directory as soon you don't need it anymore
  using the magic DESTROY() function automatically call be perl when the
  object is no longer reference.


pkgId: 4eaab89ba59fe97f1cf735364c8ff946cf840b4964f850de0047b19bad6203c9
name: perl-File-Touch
arch: noarch
version: 0.11
epoch: 0
release: 1.el6
summary: Update access, modification timestamps, creating nonexistent files
url: http://search.cpan.org/dist/File-Touch
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-File-Touch-0.11-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Touch-0.11-1.el6.noarch.rpm
checksum_type: sha256
description:
  The following Perl module allows you to update access and modification
  timestamps, creating nonexistent files where necessary.


pkgId: 17b9ee51baecdab5d57053c1daafd85be2a22047f6530b589f33046f64683879
name: perl-File-Type
arch: noarch
version: 0.22
epoch: 0
release: 23.el6
summary: Determine file type using magic
url: http://search.cpan.org/dist/File-Type/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-Type-0.22-23.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-Type-0.22-23.el6.noarch.rpm
checksum_type: sha256
description:
  File::Type uses magic numbers (typically at the start of a file) to
  determine the MIME type of that file.


pkgId: 982ada041e7333507ea52f8ecebb89d6acaf0e527d8d272110217e57fe4b139b
name: perl-File-Which
arch: noarch
version: 1.09
epoch: 0
release: 2.el6
summary: Portable implementation of the 'which' utility
url: http://search.cpan.org/dist/File-Which/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-File-Which-1.09-2.el6.src.rpm
location_href: perl-File-Which-1.09-2.el6.noarch.rpm
checksum_type: sha256
description:
  File::Which is a portable implementation (in Perl) of 'which', and can
  be used to get the absolute filename of an executable program
  installed somewhere in your PATH, or just check for its existence. It
  includes the command-line utility 'pwhich' which has the same function
  as 'which'.


pkgId: af9e5bc9e6f7d8fe4e0cbcf793a434abce7768f50bf0a59570003f8a1b707b89
name: perl-File-chdir
arch: noarch
version: 0.1008
epoch: 0
release: 1.el6
summary: A more sensible way to change directories
url: http://search.cpan.org/dist/File-chdir/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-File-chdir-0.1008-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-File-chdir-0.1008-1.el6.noarch.rpm
checksum_type: sha256
description:
  Perl's chdir() has the unfortunate problem of being very, very, very
  global. If any part of your program calls chdir() or if any library you
  use calls chdir(), it changes the current working directory for the
  whole program.


pkgId: 668db82b817bdd1500d80f739ef0f9a45159e7dc436829e3902bb420bfc3e77d
name: perl-File-pushd
arch: noarch
version: 1.00
epoch: 0
release: 0.3.1.el6
summary: Change directory temporarily for a limited scope
url: http://search.cpan.org/dist/File-pushd/
rpm_license: ASL 2.0
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-File-pushd-1.00-0.3.1.el6.src.rpm
rpm_packager: Koji
location_href: perl-File-pushd-1.00-0.3.1.el6.noarch.rpm
checksum_type: sha256
description:
  File::pushd does a temporary chdir that is easily and automatically
  reverted, similar to pushd in some Unix command shells. It works by
  creating an object that caches the original working directory. When the
  object is destroyed, the destructor calls chdir to revert to the original
  working directory. By storing the object in a lexical variable with a
  limited scope, this happens automatically at the end of the scope.


pkgId: c03c0c0c3929642ba070c88eb8c9fa0e42351adafe410e54430a3cafe5f56628
name: perl-FileHandle-Unget
arch: noarch
version: 0.1623
epoch: 0
release: 5.el6
summary: A FileHandle that supports ungetting of multiple bytes
url: http://search.cpan.org/dist/FileHandle-Unget/
rpm_license: GPL+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-FileHandle-Unget-0.1623-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-FileHandle-Unget-0.1623-5.el6.noarch.rpm
checksum_type: sha256
description:
  FileHandle::Unget is a drop-in replacement for FileHandle that allows more
  than one byte to be placed back on the input. It supports an ungetc(ORD), which
  can be called more than once in a row, and an ungets(SCALAR), which places a
  string of bytes back on the input.


pkgId: b2729a64140b4532c90fecd9e64b2d98a1462eb55cc60109459c808389ce9ac4
name: perl-Filesys-Df
arch: armv5tel
version: 0.92
epoch: 0
release: 5.el6
summary: Perl extension for filesystem disk space information
url: http://search.cpan.org/dist/Filesys-Df/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp11_alw002
rpm_sourcerpm: perl-Filesys-Df-0.92-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Filesys-Df-0.92-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides a way to obtain filesystem disk space information.
  This is a Unix only distribution. If you want to gather this information
  for Unix and Windows, use Filesys::DfPortable. The only major benefit of
  using Filesys::Df over Filesys::DfPortable, is that Filesys::Df supports
  the use of open filehandles as arguments.


pkgId: 1619f7adcf13bf24d86acf81e2fb4ccddab34340296e8085b26d52b309f08faf
name: perl-Filesys-Notify-Simple
arch: noarch
version: 0.05
epoch: 0
release: 4.el6
summary: Simple and dumb file system watcher
url: http://search.cpan.org/dist/Filesys-Notify-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Filesys-Notify-Simple-0.05-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Filesys-Notify-Simple-0.05-4.el6.noarch.rpm
checksum_type: sha256
description:
  Filesys::Notify::Simple is a simple but unified interface to get
  notifications of changes to a given filesystem path.


pkgId: d983c174579427b9f8c7bfae74bad9d7b9486d17b2f808463229fe8d7cd4ede4
name: perl-Font-TTF
arch: noarch
version: 0.45
epoch: 0
release: 6.el6
summary: Perl library for modifying TTF font files
url: http://search.cpan.org/dist/Font-TTF/
rpm_license: Artistic 2.0
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Font-TTF-0.45-6.el6.src.rpm
location_href: perl-Font-TTF-0.45-6.el6.noarch.rpm
checksum_type: sha256
description:
  Perl module for TrueType font hacking. Supports reading, processing and writing
  of the following tables: GDEF, GPOS, GSUB, LTSH, OS/2, PCLT, bsln, cmap, cvt,
  fdsc, feat, fpgm, glyf, hdmx, head, hhea, hmtx, kern, loca, maxp, mort, name,
  post, prep, prop, vhea, vmtx and the reading and writing of all other table
  types.

  In short, you can do almost anything with a standard TrueType font with this
  module.


pkgId: f4ad74ffd6b05e41c4692cb85dacfd3d1605519472c53b62eb1e2e46477635eb
name: perl-Font-TTFMetrics
arch: noarch
version: 0.1
epoch: 0
release: 2.el6
summary: Parser for the TTF file
url: http://search.cpan.org/dist/Font-TTFMetrics/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Font-TTFMetrics-0.1-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Font-TTFMetrics-0.1-2.el6.noarch.rpm
checksum_type: sha256
description:
  Font::TTFMetrics encapsulates the font metrics of a true type font file. A
  true type font file contains several tables which need to be parsed before
  any useful information could be gathered about the font. There is the
  excellent module for parsing TTF font in CPAN by Martin Hosken, Font::TTF.
  But in my opinion the use of Font::TTF requires intimate knowledge of TTF
  font format. This module was written to support the use of TTF in Pastel 2D
  graphics library in Perl. Three factors prompted me to write this module:
  first, I required a fast module to access TTF file. Second, all the access
  required was read-only. Last, I wanted a user friendly, higher level API to
  access TTF file.


pkgId: 7af32240d0e821e9557d9fcb23f7410a2dd1bde498c2b03c67fc7ba8c2b5a2ba
name: perl-Frontier-RPC
arch: noarch
version: 0.07b4p1
epoch: 0
release: 10.el6
summary: A Perl interface for making and serving XML-RPC calls
url: http://search.cpan.org/dist/Frontier-RPC/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Frontier-RPC-0.07b4p1-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Frontier-RPC-0.07b4p1-10.el6.noarch.rpm
checksum_type: sha256
description:
  Frontier::RPC implements UserLand Software's XML RPC (Remote
  Procedure Calls using Extensible Markup Language).  Frontier::RPC
  includes both a client module for making requests to a server and
  several server modules for implementing servers using CGI, Apache,
  and standalone with HTTP::Daemon.


pkgId: 921785f034a0a5929b4aad5019324048b6f0354c5218c6ce9f86f72acd9be203
name: perl-Frontier-RPC-Client
arch: noarch
version: 0.07b4p1
epoch: 0
release: 10.el6
summary: Frontier-RPC-Client Perl module
url: http://search.cpan.org/dist/Frontier-RPC/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Frontier-RPC-0.07b4p1-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Frontier-RPC-Client-0.07b4p1-10.el6.noarch.rpm
checksum_type: sha256
description:
  Frontier::RPC::Client implements UserLand Software's XML RPC (Remote
  Procedure Calls using Extensible Markup Language).  Frontier::RPC::Client
  includes just client module for making requests to a server.


pkgId: 1bef99edd2abfbf7cc8ffc4927b6f981aa403d7b550cddec7479b079829b5f21
name: perl-Fsdb
arch: noarch
version: 2.65
epoch: 0
release: 2.el6
summary: A set of commands for manipulating flat-text databases from the shell
url: http://www.isi.edu/~johnh/SOFTWARE/FSDB/
rpm_license: GPLv2
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Fsdb-2.65-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Fsdb-2.65-2.el6.noarch.rpm
checksum_type: sha256
description:
  FSDB is a package of commands for manipulating flat-ASCII databases from
  shell scripts.  FSDB is useful to process medium amounts of data (with
  very little data you'd do it by hand, with megabytes you might want a
  real database).  FSDB is very good at doing things like:

          - extracting measurements from experimental output
          - re-examining data to address different hypotheses
          - joining data from different experiments
          - eliminating/detecting outliers
          - computing statistics on data (mean, confidence intervals,
                  correlations, histograms)
          - reformatting data for graphing programs

  Rather than hand-code scripts to do each special case, FSDB provides
  higher-level functions than one gets with raw perl or shell scripts.
  (Some features:  control uses names instead of column numbers,
  it is self-documenting, and is robust with good error and memory handling.)


pkgId: 6e6703e92d7826f02cbdafe9f2b06da30173ce79b14a3fd8c7914cc3f9c29279
name: perl-GD
arch: armv5tel
version: 2.44
epoch: 0
release: 3.el6
summary: Perl interface to the GD graphics library
url: http://search.cpan.org/dist/GD/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-GD-2.44-3.el6.src.rpm
location_href: perl-GD-2.44-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  This is a autoloadable interface module for GD, a popular library
  for creating and manipulating PNG files.  With this library you can
  create PNG images on the fly or modify existing files.


pkgId: 738f9a0bcc635e2507d054ffc29bced691992f51c61160aec0046bc904afba2c
name: perl-GD-SVG
arch: noarch
version: 0.33
epoch: 0
release: 1.el6
summary: GD::SVG enables SVG output from scripts written using GD
url: http://search.cpan.org/dist/GD-SVG/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-GD-SVG-0.33-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-GD-SVG-0.33-1.el6.noarch.rpm
checksum_type: sha256
description:
  GD::SVG seamlessly enables the scalable vector graphics (SVG) output
  from scripts written using GD.  It accomplishes this by translating GD
  functions into SVG functions.


pkgId: af98148bd8d29a504f8f800b217b7df8001a6705f0f7ec5e0983e4bbf8a5c09f
name: perl-GD-SecurityImage
arch: noarch
version: 1.70
epoch: 0
release: 1.el6
summary: Security image (captcha) generator
url: http://search.cpan.org/dist/GD-SecurityImage/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-GD-SecurityImage-1.70-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-GD-SecurityImage-1.70-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module gives you a basic interface to create "security images". Most
  internet software use these in their registration screens to block robot
  programs (which may register tons of fake member accounts). This module
  gives you a basic interface to create such an image.


pkgId: 691ae116327dd481d5495189875640d21e99b535ecc09b343e4a10a9b877451e
name: perl-GDGraph3d
arch: noarch
version: 0.63
epoch: 0
release: 12.el6
summary: 3D graph generation package for Perl
url: http://search.cpan.org/dist/GD-Graph3d/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-GDGraph3d-0.63-12.el6.src.rpm
location_href: perl-GDGraph3d-0.63-12.el6.noarch.rpm
checksum_type: sha256
description:
  This is the GD::Graph3d extensions module. It provides 3D graphs for
  the GD::Graph module by Martien Verbruggen, which in turn generates
  graph using Lincoln Stein's GD.pm.


pkgId: dd63b6fc6fbcd90b27c0403802c94d692bace6dce0a84052d22b4ed81ba1b1e7
name: perl-GDTextUtil
arch: noarch
version: 0.86
epoch: 0
release: 15.el6
summary: Text utilities for use with GD
url: http://search.cpan.org/dist/GDTextUtil/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-GDTextUtil-0.86-15.el6.src.rpm
location_href: perl-GDTextUtil-0.86-15.el6.noarch.rpm
checksum_type: sha256
description:
  This package provides three modules that make it possible to work with
  internal GD fonts as well as TrueType fonts, without having to worry
  about different interface functions to call. Apart from an abstract
  interface to all font types and strings for GD, this library also
  provides some utility in aligning and wrapping your string.


pkgId: eff2413dc48ee64a1ac8501c076b8912f5fec774c215a8c55a2946eb69c53dea
name: perl-GSSAPI
arch: armv5tel
version: 0.26
epoch: 0
release: 6.el6
summary: Perl extension providing access to the GSSAPIv2 library
url: http://search.cpan.org/dist/GSSAPI/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva1.redsleeve.org
rpm_sourcerpm: perl-GSSAPI-0.26-6.el6.src.rpm
location_href: perl-GSSAPI-0.26-6.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module gives access to the routines of the GSSAPI library, as
  described in rfc2743 and rfc2744 and implemented by the Kerberos-1.2
  distribution from MIT.


pkgId: 28a91913a135cf5dff8fafe840feb1d6c47ab430f44d6671ea88c92336ee7547
name: perl-GTop
arch: armv5tel
version: 0.16
epoch: 0
release: 10.el6
summary: Perl interface to libgtop
url: http://search.cpan.org/dist/GTop/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-GTop-0.16-10.el6.src.rpm
rpm_packager: Koji
location_href: perl-GTop-0.16-10.el6.armv5tel.rpm
checksum_type: sha256
description:
  This is a perl interface to the libgtop library, useful for collecting
  real-time performance and other system statistics.


pkgId: 4671327b0828d4c61450f4ad361958b2a78b8391e3287525b3a90be5c1cd9119
name: perl-Geo-IP
arch: armv5tel
version: 1.38
epoch: 0
release: 6.el6
summary: Efficient Perl bindings for the GeoIP location database
url: http://search.cpan.org/dist/Geo-IP/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Geo-IP-1.38-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Geo-IP-1.38-6.el6.armv5tel.rpm
checksum_type: sha256
description:
  This package contains Perl bindings for the GeoIP IP/hostname to
  country/location/organization database.

  This package requires Maxmind's GeoIP libraries but is often faster than other,
  similar modules.


pkgId: 7d4e8320eefb4e1a1c85f7883280be4ea2a8320eb753858c65fcd4920953d268
name: perl-Geo-METAR
arch: noarch
version: 1.15
epoch: 0
release: 4.el6
summary: Perl module for accessing aviation weather information
url: http://search.cpan.org/dist/Geo-METAR/
rpm_license: GPLv2+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp10_alw002
rpm_sourcerpm: perl-Geo-METAR-1.15-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Geo-METAR-1.15-4.el6.noarch.rpm
checksum_type: sha256
description:
  Geo::METAR is Perl module for accessing aviation weather information.
  Referring to things like a cloud altitudes, temperature, wind, dew point,
  and so on.)


pkgId: c7c1677aa0a9695c6afaee475c7b31a8ae14a61f1872d65d9830e2fcb7f46202
name: perl-Geography-Countries
arch: noarch
version: 2009041301
epoch: 0
release: 1.el6
summary: 2-letter, 3-letter, and numerical codes for countries
url: http://search.cpan.org/dist/Geography-Countries/
rpm_license: MIT
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Geography-Countries-2009041301-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Geography-Countries-2009041301-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module maps country names, and their 2-letter, 3-letter and numerical
  codes, as defined by the ISO-3166 maintenance agency, and defined by the UNSD.


pkgId: 77c14e343b38333b9c1dba8263f5b28b05576845dc0e777f861303b49acc54cd
name: perl-Getopt-GUI-Long
arch: noarch
version: 0.91
epoch: 0
release: 6.el6
summary: A wrapper around Getopt::Long to provide a GUI to applications
url: http://search.cpan.org/dist/Getopt-GUI-Long/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Getopt-GUI-Long-0.91-6.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Getopt-GUI-Long-0.91-6.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a wrapper around Getopt::Long that extends the value of
  the original Getopt::Long module to:

  1) add a simple graphical user interface option screen if no arguments
     are passed to the program.  Thus, the arguments to actually use are
     built based on the results of the user interface. If arguments were
     passed to the program, the user interface is not shown and the
     program executes as it normally would and acts just as if
     Getopt::Long::GetOptions had been called instead.  This requires
     the QWizard and Gtk2 or Tk interfaces to be installed too.

  2) provide an auto-help mechanism such that -h and --help are
     handled automatically.  In fact, calling your program with -h
     will default to showing the user a list of short-style arguments
     when one exists for the option.  Similarly --help will show the
     user a list of long-style when possible.  --help-full will list
     all potential arguments for an option (short and long both).

  It's designed to make the creation of graphical shells trivial
  without the programmer having to think about it much as well as
  providing automatic good-looking usage output without the
  programmer needing to write usage() functions.


pkgId: 852354780ea7f61677cfc02a0cea9c6fa77ab86ab957f2255aff5f3236584b5b
name: perl-Glib
arch: armv5tel
version: 1.280
epoch: 0
release: 4.el6
summary: Perl interface to GLib
url: http://search.cpan.org/dist/Glib/
rpm_license: LGPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Glib-1.280-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Glib-1.280-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides perl access to GLib and GLib's GObject libraries.
  GLib is a portability and utility library; GObject provides a generic
  type system with inheritance and a powerful signal system.  Together
  these libraries are used as the foundation for many of the libraries
  that make up the Gnome environment, and are used in many unrelated
  projects.


pkgId: eb725b45e65d8fa6c7ac8a6580ea418d73773acc1f80e292873def992b20aa09
name: perl-Glib-devel
arch: armv5tel
version: 1.280
epoch: 0
release: 4.el6
summary: Development part of Perl interface to GLib
url: http://search.cpan.org/dist/Glib/
rpm_license: LGPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Glib-1.280-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Glib-devel-1.280-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  Development part of package perl-Glib, the Perl module providing interface
  to GLib and GObject libraries.


pkgId: a532c72e013eda8627edfac232f673820e5d11071a9073c42c70ab10ec938bf7
name: perl-Graph
arch: noarch
version: 0.91
epoch: 0
release: 3.el6
summary: Perl module for dealing with graphs, the abstract data structures
url: http://search.cpan.org/dist/Graph/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp13_alw002
rpm_sourcerpm: perl-Graph-0.91-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Graph-0.91-3.el6.noarch.rpm
checksum_type: sha256
description:
  This is Graph, a Perl module for dealing with graphs, the abstract
  data structures.

  This is a full rewrite of the Graph module 0.2xx series as discussed
  in the book "Mastering Algorithms with Perl", written by Jarkko
  Hietaniemi (the undersigned), John Macdonald, and Jon Orwant,
  and published by O'Reilly and Associates.  This rewrite is not
  fully compatible with the 0.2xx series.


pkgId: 4d8f9896fede1e4ab2f578947ea7c67ec535c825c186718ed933f87b6c81d994
name: perl-GraphViz
arch: noarch
version: 2.04
epoch: 0
release: 2.el6
summary: Interface to the GraphViz graphing tool
url: http://search.cpan.org/dist/GraphViz/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp12_alw002
rpm_sourcerpm: perl-GraphViz-2.04-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-GraphViz-2.04-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides an interface to layout and image generation of
  directed and undirected graphs in a variety of formats (PostScript, PNG,
  etc.) using the "dot", "neato", "twopi", "circo" and "fdp" programs from
  the GraphViz project (http://www.graphviz.org/ or
  http://www.research.att.com/sw/tools/graphviz/).


pkgId: 2010b3b3c9911f8828581eb761ef9d89071d6b4990b97edb808ad340c58ca69c
name: perl-Gtk2
arch: armv5tel
version: 1.2495
epoch: 0
release: 1.el6
summary: Perl interface to the 2.x series of the Gimp Toolkit library
url: http://search.cpan.org/dist/Gtk2/
rpm_license: LGPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Gtk2-1.2495-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Gtk2-1.2495-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module allows you to write Gtk+ graphical user interfaces in a
  perlish and object-oriented way, freeing you from the casting and
  memory management in C, yet remaining very close in spirit to original
  API.  Find out more about Gtk+ at http://www.gtk.org.


pkgId: eaeb0829cf701e2a81393706debcf32aab7302feffba42292fedff1b3e11f896
name: perl-Guard
arch: armv5tel
version: 1.022
epoch: 0
release: 1.el6
summary: Safe cleanup blocks
url: http://search.cpan.org/dist/Guard/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-Guard-1.022-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Guard-1.022-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module implements so-called "guards". A guard is something
  (usually an object) that "guards" a resource, ensuring that it is
  cleaned up when expected.


pkgId: 34df721da583e45079ce8957ca143b00dddfb23923017c4b55a56fd7f641ce7e
name: perl-HTML-CalendarMonthSimple
arch: noarch
version: 1.25
epoch: 0
release: 5.el6
summary: Perl Module for Generating HTML Calendars
url: http://search.cpan.org/dist/HTML-CalendarMonthSimple/
rpm_license: Public Domain
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-HTML-CalendarMonthSimple-1.25-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTML-CalendarMonthSimple-1.25-5.el6.noarch.rpm
checksum_type: sha256
description:
  HTML::CalendarMonthSimple is a Perl module for generating, manipulating,
  and printing a HTML calendar grid for a specified month. It is intended as
  a faster and easier-to-use alternative to HTML::CalendarMonth.


pkgId: 8b7229f3760882ed6f42c5a7294585e93b1d2c78e5068ac46feae9b47f4f61a9
name: perl-HTML-Entities-Numbered
arch: noarch
version: 0.04
epoch: 0
release: 2.el6
summary: Conversion of numbered HTML entities
url: http://search.cpan.org/dist/HTML-Entities-Numbered/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-HTML-Entities-Numbered-0.04-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTML-Entities-Numbered-0.04-2.el6.noarch.rpm
checksum_type: sha256
description:
  HTML::Entities::Numbered is a content conversion filter for named HTML
  entities (symbols, mathmetical symbols, Greek letters, Latin letters,
  etc.). When an argument of name2decimal() or name2hex() contains some
  nameable HTML entities, they will be replaced to numbered HTML entities.
  And when an argument of name2decimal_xml() or name2hex_xml() contains
  some nameable numbered HTML entities, they will be replaced to numbered
  HTML entities except valid XML entities (the excepted "valid XML
  entities" are the following five entities: &lt;, &gt;, &amp;, &quot;,
  &apos;). By the same token, when an argument of decimal2name() or
  hex2name() contains some nameable numbered HTML entities, they will be
  replaced to named HTML entities.


pkgId: d57130167f40908f267665b7e017f26abec4f4dafd8c93b126ce5d9ea6fa421b
name: perl-HTML-FormatText-WithLinks
arch: noarch
version: 0.14
epoch: 0
release: 1.el6
summary: HTML to text conversion with links as footnotes
url: http://search.cpan.org/dist/HTML-FormatText-WithLinks/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-HTML-FormatText-WithLinks-0.14-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTML-FormatText-WithLinks-0.14-1.el6.noarch.rpm
checksum_type: sha256
description:
  HTML::FormatText::WithLinks takes HTML and turns it into plain text but
  prints all the links in the HTML as footnotes. By default, it attempts to
  mimic the format of the lynx text based web browser's --dump option.


pkgId: a75c189b8ad3a6d6c0bb7f36bac2c4b6c1319b4b67c0b7f0f4897923a4ef7920
name: perl-HTML-FromText
arch: noarch
version: 2.05
epoch: 0
release: 5.el6
summary: Convert plain text to HTML
url: http://search.cpan.org/dist/HTML-FromText/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-HTML-FromText-2.05-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTML-FromText-2.05-5.el6.noarch.rpm
checksum_type: sha256
description:
  "HTML::FromText" converts plain text to HTML. There are a handfull of
  options that shape the conversion. There is a utility function,
  "text2html", that's exported by default. This function is simply a
  short- cut to the Object Oriented interface described in detail below.


pkgId: 1f12d7f4bdda4c482bbf3a29df24b785b80d327902da3e3eeba848e48faba14c
name: perl-HTML-Mason
arch: noarch
version: 1.42
epoch: 1
release: 3.el6
summary: Powerful Perl-based web site development and delivery engine
url: http://www.masonhq.com/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-HTML-Mason-1.42-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTML-Mason-1.42-3.el6.noarch.rpm
checksum_type: sha256
description:
  Mason is a powerful Perl-based web site development and delivery
  engine. With Mason you can embed Perl code in your HTML and construct
  pages from shared, reusable components.  Mason solves the common
  problems of site development: caching, debugging, templating,
  maintaining development and production sites, and more.


pkgId: ee724d231a9b29c9242fdcc463d477821be9665edeccb3a875122d3062cae129
name: perl-HTML-Parser
arch: armv5tel
version: 3.64
epoch: 0
release: 2.el6
summary: Perl module for parsing HTML
url: http://search.cpan.org/dist/HTML-Parser/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-HTML-Parser-3.64-2.el6.src.rpm
location_href: perl-HTML-Parser-3.64-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  The HTML-Parser module for perl to parse and extract information from
  HTML documents, including the HTML::Entities, HTML::HeadParser,
  HTML::LinkExtor, HTML::PullParser, and HTML::TokeParser modules.


pkgId: e96d2f12641ba94e7df3eb2075b5cb3206250849941bab81f510936a36458b9a
name: perl-HTML-PrettyPrinter
arch: noarch
version: 0.03
epoch: 0
release: 6.el6
summary: Generate nice HTML files from HTML syntax trees
url: http://search.cpan.org/dist/HTML-PrettyPrinter/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-HTML-PrettyPrinter-0.03-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTML-PrettyPrinter-0.03-6.el6.noarch.rpm
checksum_type: sha256
description:
  HTML::PrettyPrinter produces nicely formatted HTML code from a HTML syntax
  tree. It is especially useful if the produced HTML file shall be read or
  edited manually afterwards. Various parameters let you adapt the output to
  different styles and requirements.


pkgId: cc98625738b88308e4efdc941b6211a364c25443aadd68190c3ff58ce48801e5
name: perl-HTML-Scrubber
arch: noarch
version: 0.08
epoch: 0
release: 7.el6
summary: Library for scrubbing/sanitizing html
url: http://search.cpan.org/dist/HTML-Scrubber/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-HTML-Scrubber-0.08-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTML-Scrubber-0.08-7.el6.noarch.rpm
checksum_type: sha256
description:
  If you wanna "scrub" or "sanitize" html input in a reliable an flexible
  fashion, then this module is for you.
  I wasn't satisfied with HTML::Sanitizer because it is based on
  HTML::TreeBuilder, so I thought I'd write something similar that works
  directly with HTML::Parser.


pkgId: c4fe377b9be99228bc0f6d7745dccbca522eb0fb7b534cb50686baa318ea2c84
name: perl-HTML-StripScripts
arch: noarch
version: 1.06
epoch: 0
release: 1.el6
summary: Strip scripting constructs out of HTML
url: http://search.cpan.org/dist/HTML-StripScripts/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-HTML-StripScripts-1.06-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTML-StripScripts-1.06-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module strips scripting constructs out of HTML, leaving as much non-
  scripting markup in place as possible. This allows web applications to
  display HTML originating from an untrusted source without introducing XSS
  (cross site scripting) vulnerabilities.


pkgId: 4608dfd6b3e165a54f43aba2e317edad9541fc6b761d3bd197f54d4470cbddf3
name: perl-HTML-Table
arch: noarch
version: 2.08a
epoch: 0
release: 3.el6
summary: Create HTML tables using simple interface
url: http://search.cpan.org/dist/HTML-Table/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-HTML-Table-2.08a-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTML-Table-2.08a-3.el6.noarch.rpm
checksum_type: sha256
description:
  HTML::Table is used to generate HTML tables for CGI scripts.  By using the
  methods provided fairly complex tables can be created, manipulated, then
   printed from Perl scripts.  The module also greatly simplifies creating
  tables within tables from Perl.  It is possible to create an entire table
  using the methods provided and never use an HTML tag.

  HTML::Table also allows for creating dynamically sized tables via its addRow
  and addCol methods.  These methods automatically resize the table if passed
  more cell values than will fit in the current table grid.

  Methods are provided for nearly all valid table, row, and cell tags specified
  for HTML 3.0.


pkgId: a074281a7a7fb1e20a793cd3bd4687b1854ec392b549e4fb87f7443432d318dd
name: perl-HTML-TableExtract
arch: noarch
version: 2.10
epoch: 0
release: 7.el6
summary: A Perl module for extracting content in HTML tables
url: http://www.mojotoad.com/sisk/projects/HTML-TableExtract/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-HTML-TableExtract-2.10-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTML-TableExtract-2.10-7.el6.noarch.rpm
checksum_type: sha256
description:
  HTML::TableExtract is a module that simplifies the extraction of
  information contained in tables within HTML documents.

  Tables of note may be specified using Headers, Depth, Count,
  Attributes, or some combination of the three. See the module
  documentation for details.


pkgId: c8a6b2e46bd270b9de429c65d766eb555a62400cfe009cdd8204d64fd5e3fbfb
name: perl-HTML-Tagset
arch: noarch
version: 3.20
epoch: 0
release: 4.el6
summary: HTML::Tagset - data tables useful in parsing HTML
url: http://search.cpan.org/dist/HTML-Tagset/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-HTML-Tagset-3.20-4.el6.src.rpm
location_href: perl-HTML-Tagset-3.20-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module contains several data tables useful in various kinds of
  HTML parsing operations, such as tag and entity names.


pkgId: c1aaf8b9e92c63713514e88d4062f1a625d0e21ccaf1ceb680c1a0c1a2f626af
name: perl-HTML-Template
arch: noarch
version: 2.9
epoch: 0
release: 10.el6
summary: Perl module to use HTML Templates
url: http://search.cpan.org/dist/HTML-Template/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-HTML-Template-2.9-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTML-Template-2.9-10.el6.noarch.rpm
checksum_type: sha256
description:
  This module attempts make using HTML templates simple and natural.  It
  extends standard HTML with a few new HTML-esque tags - <TMPL_VAR>,
  <TMPL_LOOP>, <TMPL_INCLUDE>, <TMPL_IF> and <TMPL_ELSE>.  The file
  written with HTML and these new tags is called a template.  It is
  usually saved separate from your script - possibly even created by
  someone else!  Using this module you fill in the values for the
  variables, loops and branches declared in the template.  This allows
  you to separate design - the HTML - from the data, which you generate
  in the Perl script.


pkgId: 02f16ed7782054883713fc1b863428ea7c2e5c68d928f1282bef7b8203046e3f
name: perl-HTML-Tidy
arch: armv5tel
version: 1.08
epoch: 0
release: 5.el6
summary: (X)HTML cleanup in a Perl object
url: http://search.cpan.org/dist/HTML-Tidy/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-HTML-Tidy-1.08-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTML-Tidy-1.08-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  HTML::Tidy is an HTML checker in a handy dandy object. It's meant as a
  replacement for HTML::Lint. If you're currently an HTML::Lint user
  looking to migrate, see the section "Converting from HTML::Lint".


pkgId: 85012675683a646a27f62d69dce64895cc4d8612d8d01dd193464a1e1cc5259a
name: perl-HTML-Tree
arch: noarch
version: 3.23
epoch: 1
release: 10.el6
summary: HTML tree handling modules for Perl
url: http://search.cpan.org/dist/HTML-Tree/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-HTML-Tree-3.23-10.el6.src.rpm
location_href: perl-HTML-Tree-3.23-10.el6.noarch.rpm
checksum_type: sha256
description:
  This distribution contains a suite of modules for representing,
  creating, and extracting information from HTML syntax trees; there is
  also relevent documentation.  These modules used to be part of the
  libwww-perl distribution, but are now unbundled in order to facilitate
  a separate development track.


pkgId: 97d685657f919d204fa2829735df9902ab800ae73f0a6aa60ab51abbb12730b7
name: perl-HTTP-BrowserDetect
arch: noarch
version: 1.21
epoch: 0
release: 5.el6
summary: Determine the Web browser, version, and platform from an HTTP user agent string
url: http://search.cpan.org/dist/HTTP-BrowserDetect/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-HTTP-BrowserDetect-1.21-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTTP-BrowserDetect-1.21-5.el6.noarch.rpm
checksum_type: sha256
description:
  The HTTP::BrowserDetect object does a number of tests on an HTTP user agent
  string. The results of these tests are available via methods of the object.

  This module is based upon the JavaScript browser detection code available
  at http://www.mozilla.org/docs/web-developer/sniffer/browser_type.html.


pkgId: 48b3c9ebeed67eb01129961a60a8529c96dd90940a3c5717ebe5aa4820fc566c
name: perl-HTTP-Cache-Transparent
arch: noarch
version: 1.0
epoch: 0
release: 5.el6
summary: Cache the result of http get-requests persistently
url: http://search.cpan.org/dist/HTTP-Cache-Transparent/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-HTTP-Cache-Transparent-1.0-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTTP-Cache-Transparent-1.0-5.el6.noarch.rpm
checksum_type: sha256
description:
  HTTP::Cache::Transparent is an implementation of http get that keeps a
  local cache of fetched pages to avoid fetching the same data from the
  server if it hasn't been updated. The cache is stored on disk and is
  thus persistent between invocations.


pkgId: e36ba5a42dc2ae62dfca3178c250d27804438e6fcc303fcf3fe7414caafdfbcb
name: perl-HTTP-Daemon-SSL
arch: noarch
version: 1.04
epoch: 0
release: 2.el6
summary: Simple http server class with SSL support
url: http://search.cpan.org/dist/HTTP-Daemon-SSL/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-HTTP-Daemon-SSL-1.04-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTTP-Daemon-SSL-1.04-2.el6.noarch.rpm
checksum_type: sha256
description:
  Instances of the HTTP::Daemon::SSL class are HTTP/1.1 servers that listen
  on a socket for incoming requests. The HTTP::Daemon::SSL is a sub-class of
  IO::Socket::SSL, so you can perform socket operations directly on it too.


pkgId: 51a47e6627b1c98b73e341d52a8443e82aa702fd2fe6a98968b28348cd5dcefd
name: perl-HTTP-Parser
arch: noarch
version: 0.06
epoch: 0
release: 6.el6
summary: Parse HTTP/1.1 request into HTTP::Request/Response object
url: http://search.cpan.org/dist/HTTP-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-HTTP-Parser-0.06-6.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-HTTP-Parser-0.06-6.el6.noarch.rpm
checksum_type: sha256
description:
  This is an HTTP request parser. It takes chunks of text as received and
  returns a 'hint' as to what is required, or returns the HTTP::Request when
  a complete request has been read. HTTP/1.1 chunking is supported. It dies
  if it finds an error.


pkgId: 23e0143b5118c5471c058c83936b1cc58dd07a78b97919ce6907cd30ff8d816a
name: perl-HTTP-Server-Simple
arch: noarch
version: 0.42
epoch: 0
release: 1.el6
summary: Very simple standalone HTTP daemon
url: http://search.cpan.org/dist/HTTP-Server-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-HTTP-Server-Simple-0.42-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-HTTP-Server-Simple-0.42-1.el6.noarch.rpm
checksum_type: sha256
description:
  HTTP::Server::Simple is a very simple standalone HTTP daemon with no non-core
  module dependencies.  It's ideal for building a standalone http-based UI to
  your existing tools.


pkgId: 962d1e22ac8a575fe4a24aaa0a1c93d5b74b36011bc4e51a3a53c7a4d71cc877
name: perl-HTTP-Server-Simple-PSGI
arch: noarch
version: 0.14
epoch: 0
release: 2.el6.1
summary: PSGI handler for HTTP::Server::Simple
url: http://search.cpan.org/dist/HTTP-Server-Simple-PSGI/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-HTTP-Server-Simple-PSGI-0.14-2.el6.1.src.rpm
rpm_packager: Koji
location_href: perl-HTTP-Server-Simple-PSGI-0.14-2.el6.1.noarch.rpm
checksum_type: sha256
description:
  HTTP::Server::Simple::PSGI is a HTTP::Server::Simple based HTTP server that
  can run PSGI applications. This module only depends on
  HTTP::Server::Simple, which itself doesn't depend on any non-core modules
  so it's best to be used as an embedded web server.


pkgId: 590f635a530619203230b85690adb52aac7e284a23828cb684d5200b5683c3fb
name: perl-Hardware-Verilog-Parser
arch: noarch
version: 0.13
epoch: 0
release: 3.el6
summary: Complete grammar for parsing Verilog code using perl
url: http://search.cpan.org/dist/Hardware-Verilog-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Hardware-Verilog-Parser-0.13-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Hardware-Verilog-Parser-0.13-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module defines the complete grammar needed to parse any Verilog code.
  By overloading this grammar, it is possible to easily create perl scripts
  which run through Verilog code and perform specific functions.


pkgId: f68dd29b48b2fc6d27b9e81c3468f1519c81d38f6fe9bd34f7f73fb42d1e123e
name: perl-Hardware-Vhdl-Lexer
arch: noarch
version: 1.00
epoch: 0
release: 4.el6
summary: Split VHDL code into lexical tokens
url: http://search.cpan.org/dist/Hardware-Vhdl-Lexer/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Hardware-Vhdl-Lexer-1.00-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Hardware-Vhdl-Lexer-1.00-4.el6.noarch.rpm
checksum_type: sha256
description:
  Hardware::Vhdl::Lexer splits VHDL code into lexical tokens. To use it, you
  need to first create a lexer object, passing in something which will supply
  chunks of VHDL code to the lexer. Repeated calls to the get_next_token
  method of the lexer will then return VHDL tokens (in scalar context) or a
  token type code and the token (in list context). get_next_token returns
  undef when there are no more tokens to be read.


pkgId: 9b68b8b14632387ee969397939ef970c198aed8fc25ed56b3faa14c0b3710b30
name: perl-Hardware-Vhdl-Parser
arch: noarch
version: 0.12
epoch: 0
release: 4.el6
summary: Complete grammar for parsing VHDL code using perl
url: http://search.cpan.org/dist/Hardware-Vhdl-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Hardware-Vhdl-Parser-0.12-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Hardware-Vhdl-Parser-0.12-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module defines the complete grammar needed to parse any VHDL code. By
  overloading this grammar, it is possible to easily create perl scripts
  which run through VHDL code and perform specific functions.


pkgId: 023c22e997c0f5911b4ebfefd5802ba53be33e8c2ea54e53f8e22991315121f0
name: perl-Hardware-Vhdl-Tidy
arch: noarch
version: 0.8
epoch: 0
release: 6.el6
summary: VHDL code prettifier
url: http://search.cpan.org/dist/Hardware-Vhdl-Tidy/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Hardware-Vhdl-Tidy-0.8-6.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Hardware-Vhdl-Tidy-0.8-6.el6.noarch.rpm
checksum_type: sha256
description:
  This module auto-indents VHDL source code. It may be extended in future to
  do other types of code prettification.


pkgId: 1f65230ba1eb9fb62a4f6dcd7e2ef108e4629a48c50c269bb67bb599d9394de0
name: perl-Hash-Case
arch: noarch
version: 1.006
epoch: 0
release: 3.el6
summary: Base class for hashes with key-casing requirements
url: http://search.cpan.org/dist/Hash-Case/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Hash-Case-1.006-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Hash-Case-1.006-3.el6.noarch.rpm
checksum_type: sha256
description:
  Hash::Case is the base class for various classes which tie special
  treatment for the casing of keys. Be aware of the differences in
  implementation: Lower and Upper are tied native hashes: these hashes have
  no need for hidden fields or other assisting data structured. A case
  Preserve hash will actually create three hashes.


pkgId: 98c50f1fd98f7726515fd35b0bceba408a4d6f4870e12dc4c730b36d998840fd
name: perl-Hash-MoreUtils
arch: noarch
version: 0.02
epoch: 0
release: 3.el6
summary: Provide the stuff missing in Hash::Util
url: http://search.cpan.org/dist/Hash-MoreUtils/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Hash-MoreUtils-0.02-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Hash-MoreUtils-0.02-3.el6.noarch.rpm
checksum_type: sha256
description:
  Similar to List::MoreUtils, Hash::MoreUtils contains trivial but commonly-
  used functionality for hashes.


pkgId: 2c0f4a7a30203da5385784b21ece24e0c9de408f7949c5b7c846d6a545a6b90b
name: perl-Hash-MultiValue
arch: noarch
version: 0.08
epoch: 0
release: 4.el6
summary: Store multiple values per key
url: http://search.cpan.org/dist/Hash-MultiValue
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Hash-MultiValue-0.08-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Hash-MultiValue-0.08-4.el6.noarch.rpm
checksum_type: sha256
description:
  Hash::MultiValue is an object (and a plain hash reference) that may
  contain multiple values per key.


pkgId: a07140ef037241d456a5eb17844dd657ed7f8ae9dc7d951c1984d45fd9d44dfb
name: perl-Hash-WithDefaults
arch: noarch
version: 0.04
epoch: 0
release: 6.el6
summary: Class for hashes with key-casing requirements supporting defaults
url: http://search.cpan.org/dist/Hash-WithDefaults/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Hash-WithDefaults-0.04-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Hash-WithDefaults-0.04-6.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements hashes that support "defaults". That is you may
  specify several more hashes in which the data will be looked up in case it
  is not found in the current hash.


pkgId: 669e27c0bc86710f8ee1d552127953ea78e5741c08c9431be57eb115e22505ad
name: perl-Heap
arch: noarch
version: 0.80
epoch: 0
release: 4.el6
summary: Perl extension for keeping data partially sorted
url: http://search.cpan.org/dist/Heap
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Heap-0.80-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Heap-0.80-4.el6.noarch.rpm
checksum_type: sha256
description:
  The Heap collection of modules provide routines that manage a heap of
  elements. A heap is a partially sorted structure that is always able to
  easily extract the smallest of the elements in the structure (or the
  largest if a reversed compare routine is provided).

  If the collection of elements is changing dynamically, the heap has less
  overhead than keeping the collection fully sorted.

  The elements must be objects as described in "Heap::Elem" and all
  elements inserted into one heap must be mutually compatible - either
  the same class exactly or else classes that differ only in ways unrelated
  to the Heap::Elem interface.


pkgId: 2c05414a96ed977e0804caadcd3901e92d5af3bda0fa6c489316f04ac8586572
name: perl-Hook-LexWrap
arch: noarch
version: 0.22
epoch: 0
release: 4.el6
summary: Lexically scoped subroutine wrappers
url: http://search.cpan.org/dist/Hook-LexWrap/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Hook-LexWrap-0.22-4.el6.src.rpm
location_href: perl-Hook-LexWrap-0.22-4.el6.noarch.rpm
checksum_type: sha256
description:
  Hook::LexWrap allows you to install a pre- or post-wrapper (or both)
  around an existing subroutine. Unlike other modules that provide this
  capacity (e.g. Hook::PreAndPost and Hook::WrapSub), Hook::LexWrap
  implements wrappers in such a way that the standard `caller' function
  works correctly within the wrapped subroutine.


pkgId: 9c054599a25541a6e6b29c41599d6d8382a8c0891ab276472d7a21e62bc036ff
name: perl-IO-All
arch: noarch
version: 0.39
epoch: 0
release: 4.el6
summary: IO::All Perl module
url: http://search.cpan.org/dist/IO-All/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-IO-All-0.39-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-All-0.39-4.el6.noarch.rpm
checksum_type: sha256
description:
  The IO::All object is a proxy for IO::File, IO::Dir, IO::Socket,
  IO::String, Tie::File, File::Spec, File::Path and File::ReadBackwards; as
  well as all the DBM and MLDBM modules. You can use most of the methods
  found in these classes and in IO::Handle (which they inherit from). IO::All
  adds dozens of other helpful idiomatic methods including file stat and
  manipulation functions.


pkgId: b4e5901dcdd351de3267850c184a896323870c8470577b9db0e5e8b089d1db5d
name: perl-IO-Capture
arch: noarch
version: 0.05
epoch: 0
release: 5.el6
summary: Abstract Base Class to build modules to capture output
url: http://search.cpan.org/dist/IO-Capture/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-IO-Capture-0.05-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-IO-Capture-0.05-5.el6.noarch.rpm
checksum_type: sha256
description:
  The IO::Capture Module defines an abstract base class that can be used
  to create any number of useful sub-classes that capture output being
  sent on a filehandle such as STDOUT or STDERR.


pkgId: 356fc4a172cf7ba6bcfce04a60cedec926d5befd7f5c92d97983849b2b66ec53
name: perl-IO-Compress-Base
arch: armv5tel
version: 2.021
epoch: 0
release: 141.el6.1
summary: Base Class for IO::Compress modules
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-IO-Compress-Base-2.021-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  This module is the base class for all IO::Compress and IO::Uncompress
  modules. This module is not intended for direct use in application
  code. Its sole purpose is to to be sub-classed by IO::Compress
  modules.


pkgId: b4eda9a297a31c08dceca799506fc18ce5cf735a8f437068d30590f11e220791
name: perl-IO-Compress-Bzip2
arch: armv5tel
version: 2.021
epoch: 0
release: 141.el6.1
summary: Perl interface to allow reading and writing of bzip2 data
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-IO-Compress-Bzip2-2.021-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  This module provides a Perl interface that allows writing/writing bzip2
  compressed data to/from files or buffer.


pkgId: 595087917b3bef9570114be606fd8bdf8bdcc4f4d8732603f0c0e1e780e1280a
name: perl-IO-Digest
arch: noarch
version: 0.10
epoch: 0
release: 16.el6
summary: Calculate digests while reading or writing
url: http://search.cpan.org/dist/IO-Digest/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-IO-Digest-0.10-16.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-Digest-0.10-16.el6.noarch.rpm
checksum_type: sha256
description:
  This module allows you to calculate digests while reading or writing file
  handles. This avoids the case you need to reread the same content to
  compute the digests after written a file.


pkgId: e5acd9e18cb81a980c22c087db09836ec24e213323d4e1e0e801c872ff5b9084
name: perl-IO-FDPass
arch: armv5tel
version: 1.1
epoch: 0
release: 3.el6
summary: Pass a file descriptor over a socket
url: http://search.cpan.org/dist/IO-FDPass/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IO-FDPass-1.1-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-FDPass-1.1-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  This small low-level module only has one purpose: pass a file descriptor to
  another process, using a (streaming) UNIX domain socket (on POSIX systems) or
  any (streaming) socket (on WIN32 systems). The ability to pass file descriptors
  on Windows is currently the unique selling point of this module. Have I
  mentioned that it is really small, too?


pkgId: 2a4de3d9ab3175f97b6c0fceac0a0dc07f34f5a8e3b754d09aaae1fa5afbdd36
name: perl-IO-Interface
arch: armv5tel
version: 1.05
epoch: 0
release: 2.el6
summary: Perl extension for accessing network card configuration information
url: http://search.cpan.org/dist/IO-Interface/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp10_alw002
rpm_sourcerpm: perl-IO-Interface-1.05-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-IO-Interface-1.05-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  IO::Interface adds methods to IO::Socket objects that allows them to
  be used to retrieve and change information about the network
  interfaces on your system.  In addition to the object-oriented access
  methods, you can use a function-oriented style.


pkgId: 8a30199aa34e198c201feb6e1c36701f901580e6c85389ed0abbf6c6e79a64a9
name: perl-IO-Multiplex
arch: noarch
version: 1.13
epoch: 0
release: 1.el6
summary: Manage IO on many file handles
url: http://search.cpan.org/dist/IO-Multiplex/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp10_alw002
rpm_sourcerpm: perl-IO-Multiplex-1.13-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-IO-Multiplex-1.13-1.el6.noarch.rpm
checksum_type: sha256
description:
  IO::Multiplex is designed to take the effort out of managing multiple file
  handles. It is essentially a really fancy front end to the select system call.
  In addition to maintaining the select loop, it buffers all input and output
  to/from the file handles. It can also accept incoming connections on one or
  more listen sockets.


pkgId: 33a7411d71f53d921e90f05bc9c9dc787e4fcc08a17f7f8f7746b50fa1b994dd
name: perl-IO-Pty-Easy
arch: noarch
version: 0.09
epoch: 0
release: 1.el6
summary: Easy interface to IO::Pty
url: http://search.cpan.org/dist/IO-Pty-Easy/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IO-Pty-Easy-0.09-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-Pty-Easy-0.09-1.el6.noarch.rpm
checksum_type: sha256
description:
  IO::Pty::Easy provides an interface to IO::Pty which hides most of the
  ugly details of handling ptys, wrapping them instead in simple
  spawn/read/write commands.


pkgId: fd413a388af3b444ca08341a4be605a984918728806e608189d37c6979083628
name: perl-IO-Socket-Multicast
arch: armv5tel
version: 1.12
epoch: 0
release: 2.el6
summary: Perl library for sending and receiving multicast messages
url: http://search.cpan.org/dist/IO-Socket-Multicast/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IO-Socket-Multicast-1.12-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-Socket-Multicast-1.12-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  The IO::Socket::Multicast module sub-classes IO::Socket::INET to enable you
  to manipulate multicast groups. With this module (and an operating system
  that supports multicast), you will be able to receive incoming multicast
  transmissions and generate your own outgoing multicast packets.


pkgId: 141d96c9d5a1f6d9ae67e957044d0a941b76360de5d7661589557f8ca3fdc925
name: perl-IO-Socket-SSL
arch: noarch
version: 1.31
epoch: 0
release: 2.el6
summary: Perl library for transparent SSL
url: http://search.cpan.org/dist/IO-Socket-SSL/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-IO-Socket-SSL-1.31-2.el6.src.rpm
location_href: perl-IO-Socket-SSL-1.31-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a true drop-in replacement for IO::Socket::INET that
  uses SSL to encrypt data before it is transferred to a remote server
  or client. IO::Socket::SSL supports all the extra features that one
  needs to write a full-featured SSL client or server application:
  multiple SSL contexts, cipher selection, certificate verification, and
  SSL version selection. As an extra bonus, it works perfectly with
  mod_perl.


pkgId: 1ec780adbb92247af7a12a4c866288e5a765a13f76363f7851caa44779d57a61
name: perl-IO-Socket-Timeout
arch: noarch
version: 0.27
epoch: 0
release: 1.el6
summary: IO::Socket with read/write timeout
url: http://search.cpan.org/dist/IO-Socket-Timeout/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IO-Socket-Timeout-0.27-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-Socket-Timeout-0.27-1.el6.noarch.rpm
checksum_type: sha256
description:
  IO::Socket provides a way to set a timeout on the socket, but the timeout
  will be used only for connection, not for reading / writing operations.


pkgId: c7f92bd2d2dcf7656e7d4d764898b6657896a06176a41b707f5ebbcc7c2ccee4
name: perl-IO-String
arch: noarch
version: 1.08
epoch: 0
release: 9.el6
summary: Emulate file interface for in-core strings
url: http://search.cpan.org/dist/IO-String/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-IO-String-1.08-9.el6.src.rpm
location_href: perl-IO-String-1.08-9.el6.noarch.rpm
checksum_type: sha256
description:
  The "IO::String" module provides the "IO::File" interface for in-core
  strings.  An "IO::String" object can be attached to a string, and
  makes it possible to use the normal file operations for reading or
  writing data, as well as for seeking to various locations of the
  string.  This is useful when you want to use a library module that
  only provides an interface to file handles on data that you have in a
  string variable.

  Note that perl-5.8 and better has built-in support for "in memory"
  files, which are set up by passing a reference instead of a filename
  to the open() call. The reason for using this module is that it makes
  the code backwards compatible with older versions of Perl.


pkgId: 6403db16c572f19fce93a574078c054280a5eb207c998dab34d30084b9323a17
name: perl-IO-Tee
arch: noarch
version: 0.64
epoch: 0
release: 1.el6
summary: Multiplex output to multiple output handles
url: http://search.cpan.org/dist/IO-Tee/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IO-Tee-0.64-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IO-Tee-0.64-1.el6.noarch.rpm
checksum_type: sha256
description:
  IO::Tee objects can be used to multiplex input and output in two different
  ways. The first way is to multiplex output to zero or more output handles.
  The IO::Tee constructor, given a list of output handles, returns a tied
  handle that can be written to. When written to (using print or printf), the
  IO::Tee object multiplexes the output to the list of handles originally
  passed to the constructor. As a shortcut, you can also directly pass a
  string or an array reference to the constructor, in which case
  IO::File::new is called for you with the specified argument or arguments.


pkgId: 0b12f8236b9b25f8297890d4c1a5698543eb9473830480fcb4d12f4639045b68
name: perl-IO-Zlib
arch: armv5tel
version: 1.09
epoch: 1
release: 141.el6.1
summary: Perl IO:: style interface to Compress::Zlib
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-IO-Zlib-1.09-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  This modules provides an IO:: style interface to the Compress::Zlib
  package. The main advantage is that you can use an IO::Zlib object in
  much the same way as an IO::File object so you can have common code
  that doesn't know which sort of file it is using.


pkgId: b6066de7564a1f4011c8c804f876acd8c5585ba6bea48c59a9388d7e55bca861
name: perl-IO-stringy
arch: noarch
version: 2.110
epoch: 0
release: 10.1.el6
summary: I/O on in-core objects like strings and arrays for Perl
url: http://search.cpan.org/dist/IO-stringy/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-IO-stringy-2.110-10.1.el6.src.rpm
location_href: perl-IO-stringy-2.110-10.1.el6.noarch.rpm
checksum_type: sha256
description:
  This toolkit primarily provides Perl modules for performing both
  traditional and object-oriented I/O) on things *other* than normal
  filehandles; in particular, IO::Scalar, IO::ScalarArray, and IO::Lines.


pkgId: 504922ebcf628bda49b6a2308302a44889045a8db27f1ce094ca6aad6d2a77da
name: perl-IPC-Cmd
arch: armv5tel
version: 0.56
epoch: 1
release: 141.el6.1
summary: Finding and running system commands made easy
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-IPC-Cmd-0.56-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  IPC::Cmd allows you to run commands, interactively if desired, in a
  platform independent way, but have them still work.


pkgId: 10115b691c8e730919b413671a051bba56da71adcba3dc3cf07a0eb6f8c60f2c
name: perl-IPC-Run
arch: noarch
version: 0.84
epoch: 0
release: 1.el6
summary: Perl module for interacting with child processes
url: http://search.cpan.org/dist/IPC-Run/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IPC-Run-0.84-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IPC-Run-0.84-1.el6.noarch.rpm
checksum_type: sha256
description:
  IPC::Run allows you run and interact with child processes using files,
  pipes, and pseudo-ttys. Both system()-style and scripted usages are
  supported and may be mixed. Likewise, functional and OO API styles are
  both supported and may be mixed.
  Various redirection operators reminiscent of those seen on common Unix
  and DOS command lines are provided.


pkgId: d13de78f3b26611cdd9d29674dedd3102ecab0a1834e101a34d2659921e558ca
name: perl-IPC-Run-SafeHandles
arch: noarch
version: 0.02
epoch: 0
release: 4.el6
summary: Use IPC::Run and IPC::Run3 safely
url: http://search.cpan.org/dist/IPC-Run-SafeHandles/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-IPC-Run-SafeHandles-0.02-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-IPC-Run-SafeHandles-0.02-4.el6.noarch.rpm
checksum_type: sha256
description:
  IPC::Run and IPC::Run3 are both very upset when you try to use them under
  environments where you have STDOUT and/or STDERR tied to something else,
  such as under fastcgi.


pkgId: 1e7075eb342890493dc2340574673f7e73e92f9c9de829f5a275bd56dcb205c4
name: perl-IPC-Run3
arch: noarch
version: 0.043
epoch: 0
release: 5.el6
summary: Run a subprocess in batch mode
url: http://search.cpan.org/dist/IPC-Run3/
rpm_license: (GPL+ or Artistic) or BSD
rpm_group: Development/Libraries
rpm_buildhost: chrs1.redsleeve.org
rpm_sourcerpm: perl-IPC-Run3-0.043-5.el6.src.rpm
location_href: perl-IPC-Run3-0.043-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module allows you to run a subprocess and redirect stdin, stdout,
  and/or stderr to files and perl data structures. It aims to satisfy 99% of
  the need for using system, qx, and open3 with a simple, extremely Perlish
  API and none of the bloat and rarely used features of IPC::Run.


pkgId: 896aa25a3a997eb5934484ba7831af84a9e1ebef17b212e9bbff401e203f37c7
name: perl-IPC-ShareLite
arch: armv5tel
version: 0.13
epoch: 0
release: 4.el6
summary: Lightweight interface to shared memory
url: http://search.cpan.org/dist/IPC-ShareLite/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-IPC-ShareLite-0.13-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IPC-ShareLite-0.13-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  IPC::ShareLite provides a simple interface to shared memory, allowing
  data to be efficiently communicated between processes.


pkgId: 3def7688351e09a1bb296d1a8931837785d2dcc119e85fe2150bbe9679a37dd4
name: perl-IPC-SharedCache
arch: noarch
version: 1.3
epoch: 0
release: 11.el6
summary: Perl module to manage a cache in SysV IPC shared memory
url: http://search.cpan.org/dist/IPC-SharedCache/
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-IPC-SharedCache-1.3-11.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IPC-SharedCache-1.3-11.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides a shared memory cache accessed as a tied hash.
  Shared memory is an area of memory that is available to all processes.
  It is accessed by choosing a key, the ipc_key argument to tie.  Every
  process that accesses shared memory with the same key gets access to
  the same region of memory.  In some ways it resembles a file system,
  but it is not hierarchical and it is resident in memory.  This makes
  it harder to use than a filesystem but much faster.  The data in
  shared memory persists until the machine is rebooted or it is
  explicitly deleted.


pkgId: 23e04b6b5c5312e5772d63eeb0b148ce5cfe07d0ab41a0a3d8c666097d8d7dd2
name: perl-IPC-Signal
arch: noarch
version: 1.00
epoch: 0
release: 2.el6
summary: Utility functions dealing with signals for Perl
url: http://search.cpan.org/dist/IPC-Signal/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-IPC-Signal-1.00-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-IPC-Signal-1.00-2.el6.noarch.rpm
checksum_type: sha256
description:
  This Perl module contains utility functions for dealing with signals.
  Currently these are just translating between signal names and signal
  numbers and vice versa.


pkgId: 29aa33e225875c7b897db30c52e0f2d537aa3c08ba8f8eefd14d4792d859f212
name: perl-IPC-System-Simple
arch: noarch
version: 1.21
epoch: 0
release: 5.el6
summary: Run commands simply, with detailed diagnostics
url: http://search.cpan.org/dist/IPC-System-Simple
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IPC-System-Simple-1.21-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IPC-System-Simple-1.21-5.el6.noarch.rpm
checksum_type: sha256
description:
  Calling Perl's in-built 'system()' function is easy; determining if it
  was successful is _hard_. Let's face it, '$?' isn't the nicest variable
  in the world to play with, and even if you _do_ check it, producing a
  well-formatted error string takes a lot of work. 'IPC::System::Simple'
  takes the hard work out of calling external commands. In fact, if you
  want to be really lazy, you can just write:

      use IPC::System::Simple qw(system);

  and all of your "system" commands will either succeed (run to completion and
  return a zero exit value), or die with rich diagnostic messages.


pkgId: df43fad1a21f23df979900be5b562528809ff2c5cbfde79b8639747d1aa1f5f8
name: perl-IPTables-ChainMgr
arch: noarch
version: 1.2
epoch: 0
release: 6.el6
summary: Perl extension for manipulating iptables policies
url: http://www.cipherdyne.org/modules/
rpm_license: Artistic 2.0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IPTables-ChainMgr-1.2-6.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IPTables-ChainMgr-1.2-6.el6.noarch.rpm
checksum_type: sha256
description:
  The IPTables::ChainMgr package provides an interface to manipulate iptables
  policies on Linux systems through the direct execution of iptables
  commands. Although making a perl extension of libiptc provided by the iptables
  project is possible, it is easy to just execute iptables commands directly in
  order to both parse and change the configuration of the policy. Further, this
  simplifies installation since the only external requirement is (in the spirit
  of scripting) to be able to point IPTables::ChainMgr at an installed iptables
  binary instead of having to compile against a library.


pkgId: 219048ae6f60a2a92adcd0878b83e2026ba3294e53cdec2e30025131f6f89e20
name: perl-IPTables-Parse
arch: noarch
version: 0.7
epoch: 0
release: 4.el6
summary: Perl extension for parsing iptables firewall rulesets
url: http://www.cipherdyne.org/modules/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-IPTables-Parse-0.7-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IPTables-Parse-0.7-4.el6.noarch.rpm
checksum_type: sha256
description:
  The IPTables::Parse package provides an interface to parse iptables rules
  on Linux systems through the direct execution of iptables commands, or from
  parsing a file that contains an iptables policy listing. You can get the
  current policy applied to a table/chain, look for a specific user-defined
  chain, check for a default DROP policy, or determing whether or not logging
  rules exist.


pkgId: 0ba007d6cabff1d093434eeb147cc6633eacb77d4b77ae1f610266e4de593c17
name: perl-IRC-Utils
arch: noarch
version: 0.12
epoch: 0
release: 5.el6
summary: Common utilities for IRC-related tasks
url: http://search.cpan.org/dist/IRC-Utils/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-IRC-Utils-0.12-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-IRC-Utils-0.12-5.el6.noarch.rpm
checksum_type: sha256
description:
  The functions in this module take care of many of the tasks you are faced
  with when working with IRC. Mode lines, ban masks, message encoding and
  formatting, etc.


pkgId: 6a31def41cc8bcb7c2a3aa2d4d833e008137cc57dcb73b141d731cc497ebc3c9
name: perl-Image-Dot
arch: noarch
version: 1.1
epoch: 0
release: 2.el6
summary: Create 1x1 pixel image files in pure perl
url: http://search.cpan.org/dist/Image-Dot/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Image-Dot-1.1-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Image-Dot-1.1-2.el6.noarch.rpm
checksum_type: sha256
description:
  This package provides 1x1 pixel PNG images of a certain RGB color (also
  with transparency) without relying on any external modules like GD, libpng
  or Compress::Zlib. These pixel dots can be useful in a pure-perl HTTP
  server to be able to create colored dots on-the-fly, e.g. for formatting or
  drawing purposes.


pkgId: 3ec9222ab84cf07d7b569cf8c9c6bb5775a43f22d3cd74fac0c6e071f75b3d4a
name: perl-Image-ExifTool
arch: noarch
version: 11.01
epoch: 0
release: 1.el6
summary: Utility for reading and writing image meta info
url: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Applications/Multimedia
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Image-ExifTool-11.01-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Image-ExifTool-11.01-1.el6.noarch.rpm
checksum_type: sha256
description:
  ExifTool is a Perl module with an included command-line application for
  reading and writing meta information in image, audio, and video files.
  It reads EXIF, GPS, IPTC, XMP, JFIF, MakerNotes, GeoTIFF, ICC Profile,
  Photoshop IRB, FlashPix, AFCP, and ID3 meta information from JPG, JP2,
  TIFF, GIF, PNG, MNG, JNG, MIFF, EPS, PS, AI, PDF, PSD, BMP, THM, CRW,
  CR2, MRW, NEF, PEF, ORF, DNG, and many other types of images. ExifTool
  also extracts information from the maker notes of many digital cameras
  by various manufacturers including Canon, Casio, FujiFilm, GE, HP,
  JVC/Victor, Kodak, Leaf, Minolta/Konica-Minolta, Nikon, Olympus/Epson,
  Panasonic/Leica, Pentax/Asahi, Reconyx, Ricoh, Samsung, Sanyo,
  Sigma/Foveon, and Sony.


pkgId: b80875e0be746b43398c6bed545cf62d2233484f3a83bedbd26e9f2322be6b8e
name: perl-Image-Size
arch: noarch
version: 3.2
epoch: 0
release: 6.el6
summary: Determine the size of images in several common formats in Perl
url: http://search.cpan.org/dist/Image-Size/
rpm_license: LGPLv2 or Artistic 2.0
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-Image-Size-3.2-6.el6.src.rpm
location_href: perl-Image-Size-3.2-6.el6.noarch.rpm
checksum_type: sha256
description:
  Image::Size is a library based on the image-sizing code in the wwwimagesize
  script, a tool that analyzes HTML files and adds HEIGHT and WIDTH tags to
  IMG directives. Image::Size has generalized that code to return a raw (X, Y)
  pair, and included wrappers to pre-format that output into either HTML or
  a set of attribute pairs suitable for the CGI.pm library by Lincoln Stein.
  Currently, Image::Size can size images in XPM, XBM, GIF, JPEG, PNG, MNG, TIFF,
  the PPM family of formats (PPM/PGM/PBM) and if Image::Magick is installed,
  the formats supported by it.


pkgId: 42abccaf7bf97df97831b33148a2aa3c7e37a9cde5ab7051ff77f633ef03d2a2
name: perl-Image-Xbm
arch: noarch
version: 1.08
epoch: 0
release: 12.el6
summary: Load, create, manipulate and save xbm image files in Perl
url: http://search.cpan.org/dist/Image-Xbm/
rpm_license: LGPLv2+
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Image-Xbm-1.08-12.el6.src.rpm
location_href: perl-Image-Xbm-1.08-12.el6.noarch.rpm
checksum_type: sha256
description:
  This class module provides basic load, manipulate and save functionality for
  the xbm file format.  It inherits from Image::Base which provides additional
  manipulation functionality.


pkgId: 290bf0cd5a3b9a18ddee8c7121f012a2c67f8528d26beb28801d95b248088dc9
name: perl-Image-Xpm
arch: noarch
version: 1.09
epoch: 0
release: 12.el6
summary: Load, create, manipulate and save xpm image files in Perl
url: http://search.cpan.org/dist/Image-Xpm/
rpm_license: GPL+
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Image-Xpm-1.09-12.el6.src.rpm
location_href: perl-Image-Xpm-1.09-12.el6.noarch.rpm
checksum_type: sha256
description:
  This class module provides basic load, manipulate and save functionality for
  the xpm file format.  It inherits from Image::Base which provides additional
  manipulation functionality.


pkgId: b9ba3c37efdd65bf119f55772ae0a4b6621102726d23feacaa208db34296b30c
name: perl-Inline
arch: noarch
version: 0.46
epoch: 0
release: 1.el6
summary: Inline Perl module
url: http://search.cpan.org/dist/Inline/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Inline-0.46-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Inline-0.46-1.el6.noarch.rpm
checksum_type: sha256
description:
  The Inline module allows you to put source code from other programming
  languages directly "inline" in a Perl script or module. The code is
  automatically compiled as needed, and then loaded for immediate access
  from Perl.

  Inline saves you from the hassle of having to write and compile your
  own glue code using facilities like XS or SWIG. Simply type the code
  where you want it and run your Perl as normal. All the hairy details
  are handled for you. The compilation and installation of your code
  chunks all happen transparently; all you will notice is the delay of
  compilation on the first run.

  The Inline code only gets compiled the first time you run it (or
  whenever it is modified) so you only take the performance hit
  once. Code that is Inlined into distributed modules (like on the CPAN)
  will get compiled when the module is installed, so the end user will
  never notice the compilation time.


pkgId: 72a94762921fad7005e6c9a61401f0312ff226ca1dcae8d1196379e2381e9aad
name: perl-Inline-Files
arch: noarch
version: 0.63
epoch: 0
release: 1.el6
summary: Allows for multiple inline files in a single perl file
url: http://search.cpan.org/dist/Inline-Files/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Inline-Files-0.63-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Inline-Files-0.63-1.el6.noarch.rpm
checksum_type: sha256
description:
  Inline::Files generalizes the notion of the `__DATA__' marker and the
  associated `<DATA>' filehandle, to an arbitrary number of markers and
  associated filehandles.


pkgId: 69da5f2053b9e4984ef4fc0fc647f5bd7e9a2c4d92146a704bd45e78f5f96a28
name: perl-JSON
arch: noarch
version: 2.15
epoch: 0
release: 5.el6
summary: Parse and convert to JSON (JavaScript Object Notation)
url: http://search.cpan.org/dist/JSON/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-JSON-2.15-5.el6.src.rpm
location_href: perl-JSON-2.15-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module converts between JSON (JavaScript Object Notation) and Perl
  data structure into each other. For JSON, see http://www.crockford.com/JSON/.


pkgId: 63f9fe244a7792021355d6c45beb5c2be5434244593b7734fc58b241b3bd33be
name: perl-JSON-MaybeXS
arch: noarch
version: 1.003005
epoch: 0
release: 1.el6
summary: Use Cpanel::JSON::XS with a fallback to JSON::XS and JSON::PP
url: http://search.cpan.org/dist/JSON-MaybeXS/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-JSON-MaybeXS-1.003005-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-JSON-MaybeXS-1.003005-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module first checks to see if either Cpanel::JSON::XS or JSON::XS
  is already loaded, in which case it uses that module. Otherwise it tries
  to load Cpanel::JSON::XS, then JSON::XS, then JSON::PP in order, and
  either uses the first module it finds or throws an error.

  It then exports the "encode_json" and "decode_json" functions from the
  loaded module, along with a "JSON" constant that returns the class name
  for calling "new" on.

  If you're writing fresh code rather than replacing JSON.pm usage, you
  might want to pass options as constructor args rather than calling
  mutators, so we provide our own "new" method that supports that.


pkgId: 133421cfa86d9000b611cb2d10d1196ccae4c462df0edb3a39f3c6c9ef4f4d1a
name: perl-JavaScript-Minifier
arch: noarch
version: 1.05
epoch: 0
release: 6.el6
summary: Perl extension for minifying JavaScript code
url: http://search.cpan.org/dist/JavaScript-Minifier/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-JavaScript-Minifier-1.05-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-JavaScript-Minifier-1.05-6.el6.noarch.rpm
checksum_type: sha256
description:
  This module removes unnecessary whitespace from JavaScript code. The
  primary requirement developing this module is to not break working
  code: if working JavaScript is in input then working JavaScript is
  output. It is ok if the input has missing semi-colons, snips like '++
  +' or '12 .toString()', for example. Internet Explorer conditional
  comments are copied to the output but the code inside these comments
  will not be minified.


pkgId: eb0829a23f43ba5c1f2ea04b8052c600141c086a4fe06bb12ae194aeafaf0f56
name: perl-Judy
arch: armv5tel
version: 0.41
epoch: 0
release: 4.el6
summary: Library for creating and accessing dynamic arrays
url: http://search.cpan.org/dist/Judy/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Judy-0.41-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Judy-0.41-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Judy family of functions supports fully dynamic arrays. These arrays
  may be indexed by a 32- or 64-bit word (depending on processor word size)
  (Judy::1, Judy::L), a null terminated string (Judy::SL), or an ordinary
  perl string (Judy::HS).


pkgId: e48a276ec2d083e07bd90ecc93ffa1be09c2a4af8c467dab3e4c9866502060c3
name: perl-KinoSearch
arch: armv5tel
version: 0.165
epoch: 0
release: 3.el6
summary: Search engine library
url: http://search.cpan.org/dist/KinoSearch/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-KinoSearch-0.165-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-KinoSearch-0.165-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  KinoSearch is a loose port of the Java search engine library Apache Lucene,
  written in Perl and C. The archetypal application is website search, but it
  can be put to many different uses.


pkgId: cfc12b3b156fe69149aa3a785755cb7bc052313d5b0f24d10ccaa78b301640db
name: perl-Kwiki
arch: noarch
version: 0.39
epoch: 0
release: 14.el6
summary: Kwiki Wiki Building Framework
url: http://search.cpan.org/dist/Kwiki/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Kwiki-0.39-14.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Kwiki-0.39-14.el6.noarch.rpm
checksum_type: sha256
description:
  A Wiki is a website that allows its users to add pages, and edit any
  existing pages. It is one of the most popular forms of web collaboration.
  If you are new to wiki, visit http://c2.com/cgi/wiki?WelcomeVisitors
  which is possibly the oldest wiki, and has lots of information about how
  wikis work.

  Kwiki is a Perl wiki implementation based on the Spoon application
  architecture and using the Spiffy object orientation model. The major goals
  of Kwiki are that it be easy to install, maintain and extend.

  All the features of a Kwiki wiki come from plugin modules. The base
  installation comes with the bare minimum plugins to make a working Kwiki.
  To make a really nice Kwiki installation you need to install additional
  plugins. Which plugins you pick is entirely up to you. Another goal of
  Kwiki is that every installation will be unique. When there are hundreds of
  plugins available, this will hopefully be the case.


pkgId: b32481aafa7ee773cb99ecbd588558cf3e666c5977cac0a14e7de7e947ca6c7c
name: perl-Kwiki-Attachments
arch: noarch
version: 0.21
epoch: 0
release: 5.el6
summary: Kwiki Page Attachments Plugin
url: http://search.cpan.org/dist/Kwiki-Attachments/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Kwiki-Attachments-0.21-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Kwiki-Attachments-0.21-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module gives a Kwiki wiki the ability to upload, store and manage file
  attachments on any page. Thumbnails will be created for supported file
  types if Imager or Image::Magick is installed. For more information, read
  the module POD.


pkgId: d1aeb9fbdc4a1f39dfef667b554f56b7a8775c208df3d94d2c31b1dd55eeb977
name: perl-Kwiki-Users-Remote
arch: noarch
version: 0.04
epoch: 0
release: 8.el6
summary: Automatically set Kwiki user name from HTTP authentication
url: http://search.cpan.org/dist/Kwiki-Users-Remote/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Kwiki-Users-Remote-0.04-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Kwiki-Users-Remote-0.04-8.el6.noarch.rpm
checksum_type: sha256
description:
  When using HTTP authentication for your Kwiki, use this module to
  automatically set the user's name from the username they logged in with.
  This name will appear in any Recent Changes listing.


pkgId: 0d899e2c45208aa220ff722e7f8b7f8cc1977358c1550083c5a6b721f2433839
name: perl-LDAP
arch: noarch
version: 0.40
epoch: 1
release: 2.el6
summary: LDAP Perl module
url: http://search.cpan.org/dist/perl-ldap/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-LDAP-0.40-2.el6.src.rpm
location_href: perl-LDAP-0.40-2.el6.noarch.rpm
checksum_type: sha256
description:
  Net::LDAP is a collection of modules that implements a LDAP services API
  for Perl programs. The module may be used to search directories or perform
  maintenance functions such as adding, deleting or modifying entries.


pkgId: 1ad18295b3ba36c2b214c842265adc7ae5d68fcd2a9d8369a0e349e81ceb30b0
name: perl-LWP-UserAgent-Determined
arch: noarch
version: 1.07
epoch: 0
release: 7.el6
summary: Virtual browser that retries errors
url: http://search.cpan.org/dist/LWP-UserAgent-Determined/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-LWP-UserAgent-Determined-1.07-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-LWP-UserAgent-Determined-1.07-7.el6.noarch.rpm
checksum_type: sha256
description:
  This class works just like LWP::UserAgent (and is based on it, by being a
  subclass of it), except that when you use it to get a web page but run into
  a possibly-temporary error (like a DNS lookup timeout), it'll wait a few
  seconds and retry a few times.


pkgId: 277e9ce5a8d39289a052b8b10a5b69e5fe5c1ed45fb46d34bf58ade015969093
name: perl-Lingua-EN-Fathom
arch: noarch
version: 1.15
epoch: 0
release: 2.el6
summary: Measure readability of English text
url: http://search.cpan.org/dist/Lingua-EN-Fathom/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Lingua-EN-Fathom-1.15-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Lingua-EN-Fathom-1.15-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module analyses English text in either a string or file. Totals are
  then calculated for the number of characters, words, sentences, blank and
  non blank (text) lines and paragraphs.


pkgId: e55d1fbe223dcef3d5c8e20c5c89980829c9ea24e17cef8d8a6db3d540f81078
name: perl-Lingua-EN-Numbers-Ordinate
arch: noarch
version: 1.02
epoch: 0
release: 5.el6
summary: Perl functions for giving the ordinal form of a number given its cardinal value
url: http://search.cpan.org/dist/Lingua-EN-Numbers-Ordinate/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-Lingua-EN-Numbers-Ordinate-1.02-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Lingua-EN-Numbers-Ordinate-1.02-5.el6.noarch.rpm
checksum_type: sha256
description:
  There are two kinds of numbers in English -- cardinals (1,
  2, 3...), and ordinals (1st, 2nd, 3rd...).  This library
  provides functions for giving the ordinal form of a number,
  given its cardinal value.


pkgId: 831e480bee8494bfa15f25e4b23cc558a5a1e9041ab344c67f63319bc2da9c51
name: perl-Lingua-EN-Sentence
arch: noarch
version: 0.25
epoch: 0
release: 1.el6
summary: Module for splitting text into sentences
url: http://search.cpan.org/dist/Lingua-EN-Sentence/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Lingua-EN-Sentence-0.25-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Lingua-EN-Sentence-0.25-1.el6.noarch.rpm
checksum_type: sha256
description:
  The Lingua::EN::Sentence module contains the function get_sentences, which
  splits text into its constituent sentences, based on a regular expression
  and a list of abbreviations (built in and given).


pkgId: a744c23a5b299dcded7cd3e481fa5571b6931b6043a3902ea52ada9d21a6573b
name: perl-Lingua-Preferred
arch: noarch
version: 0.2.4
epoch: 0
release: 5.el6
summary: Perl extension to choose a language
url: http://search.cpan.org/dist/Lingua-Preferred/
rpm_license: GPLv2+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Lingua-Preferred-0.2.4-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Lingua-Preferred-0.2.4-5.el6.noarch.rpm
checksum_type: sha256
description:
  Many web browsers let you specify which languages you understand.
  Then they negotiate with the web server to get documents in the best
  language possible.  This is something similar in Perl.


pkgId: 3718ec6570d0b0a110d7f110f16c764c7d0dd5e3939ed73e49b88da3c86c0088
name: perl-Lingua-Stem-Snowball
arch: armv5tel
version: 0.952
epoch: 0
release: 4.el6
summary: Perl interface to Snowball stemmers
url: http://search.cpan.org/dist/Lingua-Stem-Snowball/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Lingua-Stem-Snowball-0.952-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Lingua-Stem-Snowball-0.952-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  Stemming reduces related words to a common root form -- for instance,
  "horse", "horses", and "horsing" all become "hors". Most commonly,
  stemming is deployed as part of a search application, allowing
  searches for a given term to match documents which contain other forms
  of that term.

  This module is very similar to Lingua::Stem -- however, Lingua::Stem
  is pure Perl, while Lingua::Stem::Snowball is an XS module which
  provides a Perl interface to the C version of the Snowball
  stemmers.


pkgId: 79272cf64206e67fc7d29f84fc446563304c469a08437c8ec609367726902e93
name: perl-Lingua-StopWords
arch: noarch
version: 0.09
epoch: 0
release: 5.el6
summary: Stop words for several languages
url: http://search.cpan.org/dist/Lingua-StopWords/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Lingua-StopWords-0.09-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Lingua-StopWords-0.09-5.el6.noarch.rpm
checksum_type: sha256
description:
  In keyword search, it is common practice to suppress a collection of
  "stopwords": words such as "the", "and", "maybe", etc. which exist in in a
  large number of documents and do not tell you anything important about any
  document which contains them. This module provides such "stoplists" in
  several languages.


pkgId: b1934e2735937c7201e7771935b9e2f3eba073ed08a263be710be0edf25e2358
name: perl-Lingua-Translit
arch: noarch
version: 0.27
epoch: 0
release: 1.el6
summary: Transliterates text between writing systems
url: http://search.cpan.org/dist/Lingua-Translit/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Lingua-Translit-0.27-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Lingua-Translit-0.27-1.el6.noarch.rpm
checksum_type: sha256
description:
  Lingua::Translit can be used to convert text from one writing system to
  another, based on national or international transliteration tables. Where
  possible a reverse transliteration is supported.


pkgId: d062e33043efb8cedd5e6ff62015317432a5da9b9bb652f5cff3de58a12e5ab6
name: perl-Linux-Inotify2
arch: armv5tel
version: 1.21
epoch: 0
release: 3.el6
summary: Scalable directory/file change notification
url: http://search.cpan.org/dist/Linux-Inotify2
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Linux-Inotify2-1.21-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Linux-Inotify2-1.21-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module implements an interface to the Linux 2.6.13+
  Inotify file/directory change notification sytem.  It has a
  number of advantages over the Linux::Inotify module:
     - it is portable (Linux::Inotify only works on x86)
     - the equivalent of fullname works correctly
     - it is better documented
     - it has callback-style interface, which is better suited for
       integration.


pkgId: fd7d7d042f2e6adac0ece1eb8a678fdaee8eecb4c6c8cb1a66f2077202cb7914
name: perl-Linux-Pid
arch: armv5tel
version: 0.04
epoch: 0
release: 8.el6
summary: Get the native PID and the PPID on Linux
url: http://search.cpan.org/dist/Linux-Pid/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Linux-Pid-0.04-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-Linux-Pid-0.04-8.el6.armv5tel.rpm
checksum_type: sha256
description:
  Linux::Pid gets the native PID and the PPID on Linux. It's useful with
  multithreaded programs. Linux's C library returns different values of
  the PID and the PPID from different threads. This module forces Perl
  to call the underlying C functions getpid() and getppid().


pkgId: b3368bf06e5a5bc666858a543f7eedf89d21636540279c2e7740a7b3798df720
name: perl-List-MoreUtils
arch: armv5tel
version: 0.22
epoch: 0
release: 10.el6
summary: Provide the stuff missing in List::Util
url: http://search.cpan.org/dist/List-MoreUtils/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-List-MoreUtils-0.22-10.el6.src.rpm
location_href: perl-List-MoreUtils-0.22-10.el6.armv5tel.rpm
checksum_type: sha256
description:
  List::MoreUtils provides some trivial but commonly needed functionality
  on lists which is not going to go into List::Util.


pkgId: 8f82a7078371896f9b89ecd8640c7850b1f0b0f049bb0d3f84c73ff1b4f19b91
name: perl-Locale-Maketext-Fuzzy
arch: noarch
version: 0.10
epoch: 0
release: 5.el6
summary: Maketext from already interpolated strings
url: http://search.cpan.org/dist/Locale-Maketext-Fuzzy/
rpm_license: MIT
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Locale-Maketext-Fuzzy-0.10-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Locale-Maketext-Fuzzy-0.10-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a subclass of Locale::Maketext, with additional
  support for localizing messages that already contains interpolated
  variables.  This is most useful when the messages are returned by
  external modules -- for example, to match "dir: command not foundr"
  against "[_1]: command not found".


pkgId: 3a289af1db5dd9695b2f96cb79be37b6f65c42d1c7ec3a7e2c10b1799408f24f
name: perl-Locale-Maketext-Gettext
arch: noarch
version: 1.27
epoch: 0
release: 1.1.el6
summary: Joins the gettext and Maketext frameworks
url: http://search.cpan.org/dist/Locale-Maketext-Gettext/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Locale-Maketext-Gettext-1.27-1.1.el6.src.rpm
location_href: perl-Locale-Maketext-Gettext-1.27-1.1.el6.noarch.rpm
checksum_type: sha256
description:
  Locale::Maketext::Gettext joins the GNU gettext and Maketext frameworks. It
  is a subclass of Locale::Maketext(3) that follows the way GNU gettext
  works. It works seamlessly, both in the sense of GNU gettext and Maketext.
  As a result, you enjoy both their advantages, and get rid of both their
  problems, too.


pkgId: 3db47c2526995203df9519a487c04b86dcea97e2277d386a23b7de68cde31d11
name: perl-Locale-Maketext-Lexicon
arch: noarch
version: 0.82
epoch: 0
release: 1.el6
summary: Extract translatable strings from source
url: http://search.cpan.org/dist/Locale-Maketext-Lexicon/
rpm_license: MIT
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Locale-Maketext-Lexicon-0.82-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Locale-Maketext-Lexicon-0.82-1.el6.noarch.rpm
checksum_type: sha256
description:
  Locale::Maketext::Lexicon provides lexicon-handling backends for
  Locale::Maketext to read from other localization formats, such as PO files,
  MO files, or from databases via the "Tie" interface.


pkgId: 7318ac5b7d0aee52aa5b345701dafa26f8f9f88f2d84b315f392d7a68fb586c0
name: perl-Locale-Maketext-Simple
arch: armv5tel
version: 0.18
epoch: 1
release: 141.el6.1
summary: Simple interface to Locale::Maketext::Lexicon
url: http://www.perl.org/
rpm_license: MIT
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Locale-Maketext-Simple-0.18-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  This module is a simple wrapper around Locale::Maketext::Lexicon, designed
  to alleviate the need of creating Language Classes for module authors.


pkgId: a8a836704d7bb5c6478c9485f349fe2f0790d3b2b66d263715a38ccc52916a3f
name: perl-Locale-Msgfmt
arch: noarch
version: 0.15
epoch: 0
release: 10.el6
summary: Compile .po files to .mo files
url: http://search.cpan.org/dist/Locale-Msgfmt/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Locale-Msgfmt-0.15-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Locale-Msgfmt-0.15-10.el6.noarch.rpm
checksum_type: sha256
description:
  This module does the same thing as msgfmt from GNU gettext-tools,
  except this is pure Perl. The interface is best explained through
  examples on home page.


pkgId: 0430e66dbb6125d442920cab8e77a96e97ab7e3ddec2b30d027b793b33556b61
name: perl-Locale-PO
arch: noarch
version: 0.21
epoch: 0
release: 2.1.el6
summary: Perl module for manipulating .po entries from GNU gettext
url: http://search.cpan.org/dist/Locale-PO/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Locale-PO-0.21-2.1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Locale-PO-0.21-2.1.el6.noarch.rpm
checksum_type: sha256
description:
  This module simplifies management of GNU gettext .po files and is an
  alternative to using emacs po-mode. It provides an object-oriented
  interface in which each entry in a .po file is a Locale::PO object.


pkgId: 20a719127df9006b5dfea3588aa935501feeb24f7c23923ab11f1a6471b03130
name: perl-LockFile-Simple
arch: noarch
version: 0.207
epoch: 0
release: 2.el6
summary: Simple file locking scheme
url: http://search.cpan.org/dist/LockFile-Simple/
rpm_license: GPLv2+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-LockFile-Simple-0.207-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-LockFile-Simple-0.207-2.el6.noarch.rpm
checksum_type: sha256
description:
  This simple locking scheme is not based on any file locking system calls
  such as flock() or lockf() but rather relies on basic file system
  primitives and properties, such as the atomicity of the write() system
  call. It is not meant to be exempt from all race conditions, especially
  over NFS.


pkgId: c0fd4fbc299a49eae1749d3526478fd9e2c8687fbbf6cf617593118e3432aeb6
name: perl-Log-Dispatch
arch: noarch
version: 2.27
epoch: 0
release: 1.el6
summary: Dispatches messages to one or more outputs
url: http://search.cpan.org/dist/Log-Dispatch/
rpm_license: Artistic 2.0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Log-Dispatch-2.27-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Dispatch-2.27-1.el6.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch is a suite of OO modules for logging messages to
  multiple outputs, each of which can have a minimum and maximum log
  level.  It is designed to be easily subclassed, both for creating a
  new dispatcher object and particularly for creating new outputs.


pkgId: d3a1169eda447493360a5bc8d5037aa719a11942477ba6f02118d35f064689d1
name: perl-Log-Dispatch-Array
arch: noarch
version: 1.001
epoch: 0
release: 4.el6
summary: Log events to an array (reference)
url: http://search.cpan.org/dist/Log-Dispatch-Array/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Log-Dispatch-Array-1.001-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Dispatch-Array-1.001-4.el6.noarch.rpm
checksum_type: sha256
description:
  This provides a Log::Dispatch log output system that appends logged events
  to an array reference. This is probably only useful for testing the logging
  of your code.


pkgId: e29f70b6eb27c9281ebc9ae90dbe91678578c0c1521a52e3f6b763ed19af63df
name: perl-Log-Dispatch-Config
arch: noarch
version: 1.04
epoch: 0
release: 3.el6
summary: Log4j for Perl
url: http://search.cpan.org/dist/Log-Dispatch-Config
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Log-Dispatch-Config-1.04-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Dispatch-Config-1.04-3.el6.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch::Config is a subclass of Log::Dispatch and provides a way to
  configure Log::Dispatch object with configuration file (default, in AppConfig
  format).


pkgId: 665dc9ab05f26f483c13afd332fa0deb75584253e2ca33aa9c2808f3418531ed
name: perl-Log-Dispatch-Configurator-Any
arch: noarch
version: 1.110690
epoch: 0
release: 5.el6
summary: Configurator implementation with Config::Any
url: http://search.cpan.org/dist/Log-Dispatch-Configurator-Any/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Log-Dispatch-Configurator-Any-1.110690-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Dispatch-Configurator-Any-1.110690-5.el6.noarch.rpm
checksum_type: sha256
description:
  Log::Dispatch::Config is a wrapper for Log::Dispatch and provides a way to
  configure Log::Dispatch objects with configuration files. Somewhat like a lite
  version of log4j and Log::Log4perl it allows multiple log destinations. The
  standard configuration file format for Log::Dispatch::Config is AppConfig.


pkgId: 2d0e99f2139e75fd2913df92670e89bb434e2bed3d11a9d0569f0e5861e191a3
name: perl-Log-Dispatch-FileRotate
arch: noarch
version: 1.19
epoch: 0
release: 4.el6
summary: Log to files that archive/rotate themselves
url: http://search.cpan.org/dist/Log-Dispatch-FileRotate/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Log-Dispatch-FileRotate-1.19-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Dispatch-FileRotate-1.19-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides a simple object for logging to files under the
  Log::Dispatch::* system, and automatically rotating them according to
  different constraints. This is basically a Log::Dispatch::File wrapper
  with additions.


pkgId: 73b21a71446a05167316bb7ddcb08876df26fa6530475f206f90de8466f25b98
name: perl-Log-Dispatch-Perl
arch: noarch
version: 0.03
epoch: 0
release: 5.el6
summary: Use core Perl functions for logging
url: http://search.cpan.org/dist/Log-Dispatch-Perl/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Log-Dispatch-Perl-0.03-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Dispatch-Perl-0.03-5.el6.noarch.rpm
checksum_type: sha256
description:
  The "Log::Dispatch::Perl" module offers a logging alternative using
  standard Perl core functions. It allows you to fall back to the common Perl
  alternatives for logging, such as "warn" and "cluck". It also adds the
  possibility for a logging action to halt the current environment, such as
  with "die" and "croak".


pkgId: 0ce93e33bc6ef54ebfaa96a91518d7d6c54da6ed97f59813ea7c25a675ebcbf7
name: perl-Log-Log4perl
arch: noarch
version: 1.30
epoch: 0
release: 1.el6
summary: Log4j implementation for Perl
url: http://search.cpan.org/dist/Log-Log4perl/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Log-Log4perl-1.30-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Log4perl-1.30-1.el6.noarch.rpm
checksum_type: sha256
description:
  Log::Log4perl lets you remote-control and fine-tune the logging
  behavior of your system from the outside. It implements the widely
  popular (Java-based) Log4j logging package in pure Perl.


pkgId: 17bd0da57d027022bd2eb807c8abb480133cf222b3c74bee42eb669543efdd29
name: perl-Log-Log4perl-Appender-Socket-UNIX
arch: noarch
version: 1.04
epoch: 0
release: 4.el6
summary: Log4perl appender for writing to UNIX domain sockets
url: http://search.cpan.org/dist/Log-Log4perl-Appender-Socket-UNIX/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Log-Log4perl-Appender-Socket-UNIX-1.04-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-Log4perl-Appender-Socket-UNIX-1.04-4.el6.noarch.rpm
checksum_type: sha256
description:
  This is a simple appender for writing to a unix domain socket. It relies on
  Socket and only logs to an existing socket.


pkgId: ec0219c0bd055b5d616de284186f7694c84af8ef100c048482f6d1514782d97b
name: perl-Log-Message
arch: armv5tel
version: 0.02
epoch: 1
release: 141.el6.1
summary: Generic message storage mechanism
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Log-Message-0.02-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Log::Message is a generic message storage mechanism. It allows you to
  store messages on a stack -- either shared or private -- and assign meta-data
  to it. Some meta-data will automatically be added for you, like a timestamp
  and a stack trace, but some can be filled in by the user, like a tag by
  which to identify it or group it, and a level at which to handle the
  message (for example, log it, or die with it).


pkgId: aebf297face038dc25a4e549ea6947f934b192bfcb932783b6ed76ea065c4e99
name: perl-Log-TraceMessages
arch: noarch
version: 1.4
epoch: 0
release: 4.el6
summary: Perl extension for trace messages used in debugging
url: http://search.cpan.org/dist/Log-TraceMessages/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Log-TraceMessages-1.4-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Log-TraceMessages-1.4-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a better way of putting 'hello there' trace messages in
  your code.  It lets you turn tracing on and off without commenting out
  trace statements, and provides other useful things like HTML-ified
  trace messages for CGI scripts and an easy way to trace out data
  structures using Data::Dumper.


pkgId: 5cee68407351685a8cd1e8fbd02f7d5d4a45f719488a7b2f3778fbc21c296d60
name: perl-Lucy
arch: armv5tel
version: 0.3.3
epoch: 0
release: 1.el6
summary: Search engine library
url: http://search.cpan.org/dist/Lucy/
rpm_license: ASL 2.0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Lucy-0.3.3-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Lucy-0.3.3-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  Lucy is a loose port of the Java search engine library Apache Lucene,
  written in Perl and C. The archetypal application is website search, but it
  can be put to many different uses.


pkgId: fab0aa756a1bf1620ae714685aae7f40e45754cfc8f239db6db9c02f1fe458cb
name: perl-MCE
arch: noarch
version: 1.608
epoch: 0
release: 1.el6
summary: Many-core Engine for Perl providing parallel processing capabilities
url: http://search.cpan.org/dist/MCE/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: duplo
rpm_sourcerpm: perl-MCE-1.608-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MCE-1.608-1.el6.noarch.rpm
checksum_type: sha256
description:
  Many-core Engine (MCE) for Perl helps enable a new level of performance by
  maximizing all available cores. MCE spawns a pool of workers and therefore
  does not fork a new process per each element of data. Instead, MCE follows
  a bank queuing model. Imagine the line being the data and bank-tellers the
  parallel workers. MCE enhances that model by adding the ability to chunk
  the next n elements from the input stream to the next available worker.


pkgId: c08c4562f75ebaa313fefe58d0e5a87d67df4c87f9642010cfdd1bbce783b1b9
name: perl-MCE-tools
arch: noarch
version: 1.608
epoch: 0
release: 1.el6
summary: Many-core Engine command line tools
url: http://search.cpan.org/dist/MCE/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: duplo
rpm_sourcerpm: perl-MCE-1.608-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MCE-tools-1.608-1.el6.noarch.rpm
checksum_type: sha256
description:
  This package delivers command line tools like mce_grep(1) that utilize
  the Many-core Engine (MCE) Perl library.


pkgId: f9899433a18231f5b9c5ec73d9860105ef8ef1570b00d529c13088d22f0ed632
name: perl-MD5
arch: noarch
version: 2.03
epoch: 0
release: 14.el6
summary: Perl interface to the MD5 Message-Digest Algorithm
url: http://search.cpan.org/dist/MD5/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-MD5-2.03-14.el6.src.rpm
rpm_packager: Koji
location_href: perl-MD5-2.03-14.el6.noarch.rpm
checksum_type: sha256
description:
  This module (MD5.pm) is just a thin wrapper around the Digest::MD5
  module.  It is provided so that legacy code that rely on the old
  interface continue to work with the speed benefit of the new module.


pkgId: 6917e596e8390778ef3ecf6f884325e858e2f887db84824dc7c92f46573543c1
name: perl-MIME-EncWords
arch: noarch
version: 1.014.3
epoch: 0
release: 5.el6
summary: Deal with RFC 2047 encoded words (improved)
url: http://search.cpan.org/dist/MIME-EncWords/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-MIME-EncWords-1.014.3-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MIME-EncWords-1.014.3-5.el6.noarch.rpm
checksum_type: sha256
description:
  MIME::EncWords is aimed to be another implementation of MIME::Words so that it
  will achieve more exact conformance with RFC 2047 (former RFC 1522)
  specifications. Additionally, it contains some improvements. Following synopsis
  and descriptions are inherited from its inspirer, then added descriptions on
  improvements (**) or changes and clarifications (*).


pkgId: 413b3c514457986da8df97aee10a9c76fd9a9d422be34fd5bd314e172b84f7b9
name: perl-MIME-Lite
arch: noarch
version: 3.027
epoch: 0
release: 2.el6
summary: MIME::Lite - low-calorie MIME generator
url: http://search.cpan.org/dist/MIME-Lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-MIME-Lite-3.027-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-MIME-Lite-3.027-2.el6.noarch.rpm
checksum_type: sha256
description:
  MIME::Lite is intended as a simple, standalone module for generating (not
  parsing!) MIME messages... specifically, it allows you to output a simple,
  decent single- or multi-part message with text or binaryattachments.  It does
  not require that you have the Mail:: or MIME:: modules installed.


pkgId: 0bdd712928eabbda0257a312d836127019194b4054aa4cd7f1f827bd61c74bff
name: perl-MIME-Lite-HTML
arch: noarch
version: 1.23
epoch: 0
release: 2.el6
summary: Provide routine to transform a HTML page in a MIME-Lite mail
url: http://search.cpan.org/dist/MIME-Lite-HTML/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-MIME-Lite-HTML-1.23-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-MIME-Lite-HTML-1.23-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a Perl mail client interface for sending message that
  support HTML format and build them for you.. This module provides routine to
  transform an HTML page in a MIME::Lite mail. So you need this module to use
  MIME-Lite-HTML possibilities.


pkgId: 4d149251c26829b014717e4b592e665d35ae6a4939f4b1bfde4f76b6e8b7dd0b
name: perl-MIME-Types
arch: noarch
version: 1.28
epoch: 0
release: 2.el6
summary: MIME types module for Perl
url: http://search.cpan.org/dist/MIME-Types/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-MIME-Types-1.28-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-MIME-Types-1.28-2.el6.noarch.rpm
checksum_type: sha256
description:
  MIME types are used in MIME compliant lines, for instance as part of
  e-mail and HTTP traffic, to indicate the type of content which is
  transmitted. Sometimes real knowledge about a mime-type is need.
  This module maintains a set of MIME::Type objects, which each describe
  one known mime type. There are many types defined by RFCs and vendors,
  so the list is long but not complete. Please don't hestitate to ask to
  add additional information.


pkgId: 79dfd3e70945a5d2eb162c89aad66591e608b4c96d4de9fa388867cb19cd3bb5
name: perl-MIME-tools
arch: noarch
version: 5.427
epoch: 0
release: 4.el6
summary: Modules for parsing and creating MIME entities in Perl
url: http://search.cpan.org/dist/MIME-tools/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-MIME-tools-5.427-4.el6.src.rpm
location_href: perl-MIME-tools-5.427-4.el6.noarch.rpm
checksum_type: sha256
description:
  MIME-tools is a collection of Perl5 MIME:: modules for parsing, decoding, and
  generating single- or multipart (even nested multipart) MIME messages.

  Yes, kids, that means you can send messages with attached GIF files.


pkgId: 2af41c0a0e88b54571b1840505eedf760892c75a9bd0c34a5241fbc859e68efe
name: perl-MLDBM
arch: noarch
version: 2.01
epoch: 0
release: 8.el6
summary: Store multi-level hash structure in single level tied hash
url: http://search.cpan.org/dist/MLDBM/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-MLDBM-2.01-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-MLDBM-2.01-8.el6.noarch.rpm
checksum_type: sha256
description:
  This module can serve as a transparent interface to any TIEHASH package that is
  required to store arbitrary perl data, including nested references.  Thus, this
  module can be used for storing references and other arbitrary data within DBM
  databases.


pkgId: db13c2bf7744290857aafad0afc41cc89b3971f4fd84a4e21f8b3906421a53ae
name: perl-MRO-Compat
arch: noarch
version: 0.11
epoch: 0
release: 2.el6
summary: Mro::* interface compatibility for Perls < 5.9.5
url: http://search.cpan.org/dist/MRO-Compat/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-MRO-Compat-0.11-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MRO-Compat-0.11-2.el6.noarch.rpm
checksum_type: sha256
description:
  The "mro" namespace provides several utilities for dealing with method
  resolution order and method caching in general in Perl 5.9.5 and higher.
  This module provides those interfaces for earlier versions of Perl (back
  to 5.6.0 anyways).

  It is a harmless no-op to use this module on 5.9.5+. That is to say,
  code which properly uses MRO::Compat will work unmodified on both older
  Perls and 5.9.5+.

  If you're writing a piece of software that would like to use the parts
  of 5.9.5+'s mro:: interfaces that are supported here, and you want
  compatibility with older Perls, this is the module for you.


pkgId: 960a8e113cca8a09ad1d0e9c193a0c8d06f374364744859fa7933fb3d9be1d54
name: perl-Mail-Box
arch: noarch
version: 2.107
epoch: 0
release: 1.el6.1
summary: Manage a mailbox, a folder with messages
url: http://search.cpan.org/dist/Mail-Box/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Mail-Box-2.107-1.el6.1.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mail-Box-2.107-1.el6.1.noarch.rpm
checksum_type: sha256
description:
  The Mail::Box folder is a modern mail-folder manager -- at least at
  the moment of this writing ;)  It is written to replace Mail::Folder,
  although its interface is different.


pkgId: 14d68a1adfd120c764431beb36ae7221024b4acc313f8c5e857a4459ccea82f2
name: perl-Mail-DKIM
arch: noarch
version: 0.37
epoch: 0
release: 2.el6
summary: Sign and verify Internet mail with DKIM/DomainKey signatures
url: http://dkimproxy.sourceforge.net/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Mail-DKIM-0.37-2.el6.src.rpm
location_href: perl-Mail-DKIM-0.37-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements the various components of the DKIM and DomainKeys
  message-signing and verifying standards for Internet mail. It currently
  tries to implement RFC4871 (for DKIM) and RFC4870 (DomainKeys).

  It is required if you wish to enable DKIM checking in SpamAssassin via the
  Mail::SpamAssassin::Plugin::DKIM plugin.


pkgId: 794ca127604191675bc7bb1cfb8540b14e1f8ac4562bc977b813c7968a698a60
name: perl-Mail-IMAPClient
arch: noarch
version: 3.37
epoch: 0
release: 1.el6
summary: An IMAP Client API
url: http://search.cpan.org/dist/Mail-IMAPClient/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Mail-IMAPClient-3.37-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mail-IMAPClient-3.37-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides perl routines that simplify a sockets connection
  to and an IMAP conversation with an IMAP server.


pkgId: 6d38ca5024254f45ae852e247f7b16920280dcbcccf2d9b9487312b53f6f8bb9
name: perl-Mail-Mbox-MessageParser
arch: noarch
version: 1.5002
epoch: 0
release: 6.el6
summary: A fast and simple mbox folder reader
url: http://search.cpan.org/dist/Mail-Mbox-MessageParser/
rpm_license: GPL+
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Mail-Mbox-MessageParser-1.5002-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Mail-Mbox-MessageParser-1.5002-6.el6.noarch.rpm
checksum_type: sha256
description:
  Mail::Mbox::MessageParser is a feature-poor but very fast mbox parser. It uses
  the best of three strategies for parsing a mailbox: either using cached folder
  information, GNU grep, or highly optimized Perl.


pkgId: 7a1dfcefd014b25199963f3290e730faa73edd262dfd417a375c191366e23c7f
name: perl-Mail-MboxParser
arch: noarch
version: 0.55
epoch: 0
release: 2.el6
summary: Read-only access to UNIX-mailboxes
url: http://search.cpan.org/dist/Mail-MboxParser/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Mail-MboxParser-0.55-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Mail-MboxParser-0.55-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module attempts to provide a simplified access to standard UNIX-
  mailboxes. It offers only a subset of methods to get 'straight to the
  point'. More sophisticated things can still be done by invoking any method
  from MIME::Tools on the appropriate return values.


pkgId: f3a9744e993ace3162a3b42b50b78eae57d1da76e5556af8be220a15e38921e5
name: perl-Mail-POP3Client
arch: noarch
version: 2.18
epoch: 0
release: 6.el6
summary: Perl 5 module to talk to a POP3 (RFC1939) server
url: http://search.cpan.org/dist/Mail-POP3Client/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Mail-POP3Client-2.18-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Mail-POP3Client-2.18-6.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements an Object-Oriented interface to a POP3 server. It
  implements RFC1939 (http://www.faqs.org/rfcs/rfc1939.html)


pkgId: be5a4bbb2a9a0e5fe8960d265e53ad541b4f410f69ae0e77d3ea8cb4d5a43ee5
name: perl-Mail-Procmail
arch: noarch
version: 1.08
epoch: 0
release: 4.el6
summary: Procmail-like facility for creating easy mail filters
url: http://search.cpan.org/dist/Mail-Procmail/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Mail-Procmail-1.08-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mail-Procmail-1.08-4.el6.noarch.rpm
checksum_type: sha256
description:
  procmail is a great mail filter program, but it has weird recipe
  format. It's pattern matching capabilities are basic and often
  insufficient. This module provides flexibility to filter your
  mail using the power of Perl.


pkgId: cf85b66ddc04082dea024a840cc2fe896fccc06c23bfac1688049d44f1b94777
name: perl-Mail-SPF
arch: noarch
version: 2.8.0
epoch: 0
release: 2.el6
summary: Object-oriented implementation of Sender Policy Framework
url: http://search.cpan.org/dist/Mail-SPF/
rpm_license: BSD
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Mail-SPF-2.8.0-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mail-SPF-2.8.0-2.el6.noarch.rpm
checksum_type: sha256
description:
  Mail::SPF is an object-oriented implementation of Sender Policy Framework
  (SPF). See http://www.openspf.org for more information about SPF.


pkgId: d00c6759a9fc7438e918e6902091bdf792298d133fe47bd6fa23c8cb6c31b8aa
name: perl-Mail-SPF_XS
arch: armv5tel
version: 0.01
epoch: 0
release: 8.20150405gitd57d79fd.el6
summary: An XS implementation of Mail::SPF
url: http://www.libspf2.org/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: libspf2-1.2.10-5.20150405gitd57d79fd.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mail-SPF_XS-0.01-8.20150405gitd57d79fd.el6.armv5tel.rpm
checksum_type: sha256
description:
  This is an interface to the C library libspf2 for the purpose of
  testing. While it can be used as an SPF implementation, you can also
  use Mail::SPF, which is a little more perlish.


pkgId: 4de89a974a9ad10249372f17a0ade752819c6f3723a198ac9a6d8fd7526abb7f
name: perl-Mail-Sendmail
arch: noarch
version: 0.79
epoch: 0
release: 12.el6
summary: Simple platform independent mailer for Perl
url: http://search.cpan.org/dist/Mail-Sendmail/
rpm_license: Copyright only
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Mail-Sendmail-0.79-12.el6.src.rpm
rpm_packager: Koji
location_href: perl-Mail-Sendmail-0.79-12.el6.noarch.rpm
checksum_type: sha256
description:
  Mail::Sendmail is a simple platform independent library for sending
  e-mail from your perl script.  It only requires Perl 5 and a network
  connection.  Mail::Sendmail contains mainly &sendmail, which takes a
  hash with the message to send and sends it. It is intended to be very
  easy to setup and use.


pkgId: 0370da35a2ff92a5abdfd6a68d9d8167d82f413490879ed37f0b09d0c3227d76
name: perl-Mail-Transport-Dbx
arch: armv5tel
version: 0.07
epoch: 0
release: 8.el6
summary: Parse Outlook Express mailboxes
url: http://search.cpan.org/dist/Mail-Transport-Dbx/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Mail-Transport-Dbx-0.07-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-Mail-Transport-Dbx-0.07-8.el6.armv5tel.rpm
checksum_type: sha256
description:
  Mail::Transport::Dbx is a wrapper around libdbx to read Outlook Express
  mailboxes (more commonly known as .dbx files).


pkgId: af0dd053393ae0c0026acaf864cc3be73c0d4171527d924acfcdf3e0ce51f4cd
name: perl-Makefile-DOM
arch: noarch
version: 0.004
epoch: 0
release: 1.1.el6
summary: Simple DOM parser for Makefiles
url: http://search.cpan.org/dist/Makefile-DOM/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Makefile-DOM-0.004-1.1.el6.src.rpm
location_href: perl-Makefile-DOM-0.004-1.1.el6.noarch.rpm
checksum_type: sha256
description:
  This libary can serve as an advanced lexer for (GNU) makefiles. It parses
  makefiles as "documents" and the parsing is lossless. The results are data
  structures similar to DOM trees. The DOM trees hold every single bit of the
  information in the original input files, including white spaces, blank
  lines and makefile comments. That means it's possible to reproduce the
  original makefiles from the DOM trees. In addition, each node of the DOM
  trees is modifiable and so is the whole tree, just like the PPI module used
  for Perl source parsing and the HTML::TreeBuilder module used for parsing
  HTML source.


pkgId: 7d19b3e74d770cd53a020e2c46f87736f3b2f4b8c90c228dadf30962ffd283b8
name: perl-Makefile-Parser
arch: noarch
version: 0.211
epoch: 0
release: 2.el6
summary: Simple parser for Makefiles
url: http://search.cpan.org/dist/Makefile-Parser/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: chrs1.redsleeve.org
rpm_sourcerpm: perl-Makefile-Parser-0.211-2.el6.src.rpm
location_href: perl-Makefile-Parser-0.211-2.el6.noarch.rpm
checksum_type: sha256
description:
  This is a simple parser for Makefiles. At this very early stage, the parser
  only supports a limited set of features, so it may not recognize most of
  the advanced features provided by certain make tools like GNU make. Its
  initial purpose is to provide basic support for another module named
  Makefile::GraphViz, which is aimed to render the building process specified
  by a Makefile using the amazing GraphViz library. The Make module is not
  satisfactory for this purpose, so I decided to build one of my own.


pkgId: 41862edec66f55399ecf50da9c8d29d6a36e4d5b8592d18a82b94f1d4a1b02f7
name: perl-Marpa-XS
arch: armv5tel
version: 1.002000
epoch: 0
release: 2.el6.1
summary: Language grammar parser module for Perl
url: http://search.cpan.org/dist/Marpa-XS/
rpm_license: LGPLv3+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Marpa-XS-1.002000-2.el6.1.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Marpa-XS-1.002000-2.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Marpa::XS is a XS version of Marpa.

  Marpa parses any language whose grammar can be written in BNF. That
  includes recursive grammars, ambiguous grammars, infinitely ambiguous
  grammars and grammars with useless or empty productions.


pkgId: a0dc35edbe7564a816a34d6177a704b7ab6b9ff774911795374cc622db5a7415
name: perl-Math-Base85
arch: noarch
version: 0.2
epoch: 0
release: 6.el6
summary: Perl extension for base 85 numbers, as referenced by RFC 1924
url: http://search.cpan.org/dist/Math-Base85/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Math-Base85-0.2-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Math-Base85-0.2-6.el6.noarch.rpm
checksum_type: sha256
description:
  RFC 1924 describes a compact, fixed-size representation of IPv6 addresses
  which uses a base 85 number system. This module handles some of the uglier
  details of it.


pkgId: 4b183be4a899159e815ca5cace8163869bde64da89e67853f8860985f4ac57e4
name: perl-Math-BaseCnv
arch: noarch
version: 1.4.75O6Pbr
epoch: 0
release: 5.el6
summary: Fast functions to CoNVert between number Bases
url: http://search.cpan.org/dist/Math-BaseCnv
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Math-BaseCnv-1.4.75O6Pbr-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Math-BaseCnv-1.4.75O6Pbr-5.el6.noarch.rpm
checksum_type: sha256
description:
  BaseCnv provides a few simple functions for converting between arbitrary
  number bases. It is as fast as I currently know how to make it (of course
  relying only on the lovely Perl). If you would rather utilize an object syntax
  for number-base conversion, please see Ken Williams's
  <Ken@Forum.Swarthmore.Edu> fine Math::BaseCalc module.


pkgId: 70d5744d0d45be8e7bad357c1dad3a301cd833284a26886ebc8868467e18bc3f
name: perl-Math-BigInt-GMP
arch: armv5tel
version: 1.24
epoch: 0
release: 5.el6
summary: Math::BigInt::GMP Perl module
url: http://search.cpan.org/dist/Math-BigInt-GMP/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Math-BigInt-GMP-1.24-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Math-BigInt-GMP-1.24-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  This package contains a replacement (drop-in) module for Math::BigInt's
  core, Math::BigInt::Calc.pm. It needs the new versions of Math::BigInt and
  Math::BigFloat as they are from Perl 5.7.x onwards.


pkgId: 78f5539e008713ab2b26b6ce3e56e8175cba402eab69906170ab327e1a744536
name: perl-Math-Calc-Units
arch: noarch
version: 1.07
epoch: 0
release: 6.el6
summary: Human-readable unit-aware calculator
url: http://search.cpan.org/dist/Math-Calc-Units
rpm_license: GPLv2 or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Math-Calc-Units-1.07-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Math-Calc-Units-1.07-6.el6.noarch.rpm
checksum_type: sha256
description:
  Math::Calc::Units is a simple calculator that keeps track of units. It
  currently handles combinations of byte sizes and duration only, although
  adding any other multiplicative types is easy. Any unknown type is treated
  as a unique user type (with some effort to map English plurals to their
  singular forms).


pkgId: 988eb30f11a2ace08950770a9e9c95ea9b9702d7dfad49ea262ccb672aae1f07
name: perl-Math-FFT
arch: armv5tel
version: 1.28
epoch: 0
release: 3.el6
summary: Perl module to calculate Fast Fourier Transforms
url: http://search.cpan.org/dist/Math-FFT/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Math-FFT-1.28-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Math-FFT-1.28-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module implements some algorithms for calculating Fast Fourier
  Transforms for one-dimensional data sets of size 2^n.


pkgId: 3c9eef67157eee7d95bbe457d27615b095d8aff010144032188bf33217e7b0ed
name: perl-Math-GMP
arch: armv5tel
version: 2.06
epoch: 0
release: 5.el6
summary: High speed arbitrary size integer math
url: http://search.cpan.org/dist/Math-GMP/
rpm_license: LGPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Math-GMP-2.06-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Math-GMP-2.06-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  Math::GMP was designed to be a drop-in replacement both for Math::BigInt and
  for regular integer arithmetic. Unlike BigInt, though, Math::GMP uses the GNU
  gmp library for all of its calculations, as opposed to straight Perl functions.
  This can result in speed improvements.


pkgId: cef67387ef86fdee9c2dc9e240fdff4e41d7d13faddff0ce10dc17caf21eb78e
name: perl-Math-Pari
arch: armv5tel
version: 2.010806
epoch: 0
release: 7.el6
summary: Perl interface to PARI
url: http://search.cpan.org/dist/Math-Pari/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Math-Pari-2.010806-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Math-Pari-2.010806-7.el6.armv5tel.rpm
checksum_type: sha256
description:
  This package is a Perl interface to the famous library PARI for numerical/
  scientific/ number-theoretic calculations. It allows use of most PARI functions
  as Perl functions, and (almost) seamless merging of PARI and Perl data.


pkgId: 23c28fb7aab30bffe318536b855271324c04483e95d10fa7dfdcd34ce24fcdb1
name: perl-Math-Random-ISAAC
arch: noarch
version: 1.004
epoch: 0
release: 13.el6
summary: Perl interface to the ISAAC PRNG algorithm
url: http://search.cpan.org/dist/Math-Random-ISAAC/
rpm_license: MIT or GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Math-Random-ISAAC-1.004-13.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Math-Random-ISAAC-1.004-13.el6.noarch.rpm
checksum_type: sha256
description:
  As with other Pseudo-Random Number Generator (PRNG) algorithms like the
  Mersenne Twister (see Math::Random::MT), this algorithm is designed to take
  some seed information and produce seemingly random results as output.


pkgId: 93bbd36ba3fbda2ee837509d22fc2898db65086c70a68ecb1d8f5fe43accc102
name: perl-Messaging-Message
arch: noarch
version: 1.6.1
epoch: 0
release: 1.el6
summary: Abstraction of a message
url: http://search.cpan.org/dist/Messaging-Message/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Messaging-Message-1.6.1-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Messaging-Message-1.6.1-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides an abstraction of a "message", as used in "messaging",
  see for instance: http://en.wikipedia.org/wiki/Enterprise_messaging_system.


pkgId: 677cf1d678ae319d02ed615a9e473cc14c9debd840a72c2978ec2b9bd4a67199
name: perl-Mixin-Linewise
arch: noarch
version: 0.002
epoch: 0
release: 2.el6
summary: Write your linewise code for handles; this does the rest
url: http://search.cpan.org/dist/Mixin-Linewise/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Mixin-Linewise-0.002-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Mixin-Linewise-0.002-2.el6.noarch.rpm
checksum_type: sha256
description:
  It's boring to deal with opening files for IO, converting strings to handle-
  like objects, and all that. With Mixin::Linewise::Readers and
  Mixin::Linewise::Writers, you can just write a method to handle handles,
  and methods for handling strings and filenames are added for you.


pkgId: 77e675c1cdf1f4b18193c8e977418a2edfc86dc1bcbb44517ca2cc03cb4a5136
name: perl-Mock-Sub
arch: noarch
version: 1.07
epoch: 0
release: 1.el6
summary: Mock package, object and standard subroutines, with unit testing in mind
url: http://search.cpan.org/dist/Mock-Sub/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Mock-Sub-1.07-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mock-Sub-1.07-1.el6.noarch.rpm
checksum_type: sha256
description:
  Easy to use and very lightweight module for mocking out sub calls. Very
  useful for testing areas of your own modules where getting coverage may
  be difficult due to nothing to test against, and/or to reduce test run
  time by eliminating the need to call subs that you really don't want or
  need to test.


pkgId: 4418279bcbb8ce3db3db64c88496006969c23f6dfb89a0dcd25fc01183790f84
name: perl-ModelSim-List
arch: noarch
version: 0.06
epoch: 0
release: 3.el6
summary: Analyse the 'list' output of the ModelSim simulator
url: http://search.cpan.org/dist/ModelSim-List/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-ModelSim-List-0.06-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-ModelSim-List-0.06-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides a class named ModelSim::List with which the EDA tester
  can easily check in the signals contained in the files generated by
  ModelSim's "write list" command in a programming manner.


pkgId: 2d3d136f4dca93e65302abe40715d7b18d50f81b8da8efd7f8ffe2d72ae8aba0
name: perl-Module-Build
arch: armv5tel
version: 0.3500
epoch: 1
release: 141.el6.1
summary: Perl module for building and installing Perl modules
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Module-Build-0.3500-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Module::Build is a system for building, testing, and installing Perl
  modules. It is meant to be an alternative to ExtUtils::MakeMaker.
  Developers may alter the behavior of the module through subclassing in a
  much more straightforward way than with MakeMaker. It also does not
  require a make on your system - most of the Module::Build code is pure-perl and
  written in a very cross-platform way. In fact, you don't even need a
  shell, so even platforms like MacOS (traditional) can use it fairly easily. Its
  only prerequisites are modules that are included with perl 5.6.0, and it
  works fine on perl 5.005 if you can install a few additional modules.


pkgId: 309d728d35409e30af83a6495c53ed999e0ab70e928182f685dd8b98fd335a8e
name: perl-Module-Build
arch: noarch
version: 0.3607
epoch: 1
release: 1.CTBTO.el6
summary: System for building perl modules
url: http://search.cpan.org/dist/Module-Build/
rpm_license: Artistic or GPL
rpm_vendor: Dag Apt Repository, http://dag.wieers.com/apt/
rpm_group: Applications/CPAN
rpm_buildhost: koji.chester.at
rpm_sourcerpm: perl-Module-Build-0.3607-1.CTBTO.el6.src.rpm
rpm_packager: Dries Verachtert <dries@ulyssis.org>
location_href: perl-Module-Build-0.3607-1.CTBTO.el6.noarch.rpm
checksum_type: sha256
description:
  "Module::Build" is a system for building, testing, and installing Perl
  modules. It is meant to be an alternative to "ExtUtils::MakeMaker".
  Developers may alter the behavior of the module through subclassing in a
  much more straightforward way than with "MakeMaker". It also does not
  require a "make" on your system - most of the "Module::Build" code is
  pure-perl and written in a very cross-platform way.


pkgId: 4e6d82e7d2f392bdac0848738b98669a1f894714c99728a2dcd20e282a34e712
name: perl-Module-CPANTS-Analyse
arch: noarch
version: 0.85
epoch: 0
release: 11.el6
summary: Generate Kwalitee ratings for a distribution
url: http://search.cpan.org/dist/Module-CPANTS-Analyse/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Module-CPANTS-Analyse-0.85-11.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Module-CPANTS-Analyse-0.85-11.el6.noarch.rpm
checksum_type: sha256
description:
  CPANTS is an acronym for CPAN Testing Service. The goals of the CPANTS project
  are to provide some sort of quality measure (called "Kwalitee") and lots of
  metadata for all distributions on CPAN.


pkgId: 9f259ab218556d2d2e1fdee3fb5bcfe0f01e8faa92ab0edd90c7bb1c74f18d3e
name: perl-Module-CoreList
arch: armv5tel
version: 2.18
epoch: 0
release: 141.el6.1
summary: Perl core modules indexed by perl versions
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Languages
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Module-CoreList-2.18-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Module::CoreList contains the hash of hashes %Module::CoreList::version,
  this is keyed on perl version as indicated in $].  The second level hash
  is module => version pairs.


pkgId: 467d550dd7f685237f4f45a14188ed8ec257e73947f474e0a9ae839b4192ae14
name: perl-Module-Extract-Namespaces
arch: noarch
version: 1.02
epoch: 0
release: 3.el6
summary: Extract the package declarations from a module
url: http://search.cpan.org/dist/Module-Extract-Namespaces/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: lego
rpm_sourcerpm: perl-Module-Extract-Namespaces-1.02-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Module-Extract-Namespaces-1.02-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module extracts package declarations from Perl code without running the
  code.

  It does not extract:

   * Packages declared dynamically (e.g. in eval)
   * Packages created as part of a fully qualified variable name


pkgId: def6e76c2ea35b40336e0feea4c1906d18afbe666898d6b61b5bd44940abc028
name: perl-Module-Extract-Use
arch: noarch
version: 1.04
epoch: 0
release: 2.el6
summary: Pull out the modules a module explicitly uses
url: http://search.cpan.org/dist/Module-Extract-Use/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Module-Extract-Use-1.04-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Module-Extract-Use-1.04-2.el6.noarch.rpm
checksum_type: sha256
description:
  Extract the names of the modules used in a file using a static analysis. Since
  this module does not run code, it cannot find dynamic uses of modules, such as
  eval "require $class". It only reports modules that the file loads directly.
  Modules loaded with parent or base, for instance, will be in the import list
  for those pragmas but won't have separate entries in the data this module
  returns.


pkgId: d91ffeba3b4c28bd484870c761a32f35228a908b929034f4d4cc74909e787640
name: perl-Module-Extract-VERSION
arch: noarch
version: 1.01
epoch: 0
release: 3.el6
summary: Extract a module version without running code
url: http://search.cpan.org/dist/Module-Extract-VERSION/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Module-Extract-VERSION-1.01-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Module-Extract-VERSION-1.01-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module lets you pull out of module source code the version number for the
  module. It assumes that there is only one $VERSION in the file.


pkgId: 8e728b1a96a4f6c1c107107686505db01949669a3a139ec2eda2b206f16befe9
name: perl-Module-ExtractUse
arch: noarch
version: 0.23
epoch: 0
release: 4.el6
summary: Find out what modules are used
url: http://search.cpan.org/dist/Module-ExtractUse/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Module-ExtractUse-0.23-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Module-ExtractUse-0.23-4.el6.noarch.rpm
checksum_type: sha256
description:
  Module::ExtractUse is basically a Parse::RecDescent grammar to parse Perl
  code. It tries very hard to find all modules (whether pragmas, Core, or
  from CPAN) used by the parsed code.


pkgId: 3e0b26fd35c8476a98e42a1dce466f2eaf2ab76ef60154476b97dcdf5864df02
name: perl-Module-Find
arch: noarch
version: 0.08
epoch: 0
release: 3.el6
summary: Find and use installed modules in a (sub)category
url: http://search.cpan.org/dist/Module-Find/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp13_alw002
rpm_sourcerpm: perl-Module-Find-0.08-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Module-Find-0.08-3.el6.noarch.rpm
checksum_type: sha256
description:
  Module::Find lets you find and use modules in categories. This can be very
  useful for auto-detecting driver or plugin modules. You can differentiate
  between looking in the category itself or in all subcategories.


pkgId: a1e90146b0306bdcbbbea436a3671c4153b7ae041234f4b6309fd75146a8b548
name: perl-Module-Info
arch: noarch
version: 0.31
epoch: 0
release: 7.el6
summary: Information about Perl modules
url: http://search.cpan.org/dist/Module-Info/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Module-Info-0.31-7.el6.src.rpm
location_href: perl-Module-Info-0.31-7.el6.noarch.rpm
checksum_type: sha256
description:
  Module::Info gives you information about Perl modules without actually
  loading the module. It actually isn't specific to modules and should work
  on any perl code.


pkgId: 2f12630d325fa95b07f1d2b375bc8b61f2ea946e0bfd4c07b946684c9a8f7414
name: perl-Module-Install
arch: noarch
version: 0.91
epoch: 0
release: 4.el6
summary: Standalone, extensible Perl module installer
url: http://search.cpan.org/dist/Module-Install/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Module-Install-0.91-4.el6.src.rpm
location_href: perl-Module-Install-0.91-4.el6.noarch.rpm
checksum_type: sha256
description:
  Module::Install is a package for writing installers for CPAN (or CPAN-like)
  distributions that are clean, simple, minimalist, act in a strictly correct
  manner with both the ExtUtils::MakeMaker and Module::Build build systems,
  and will run on any Perl installation version 5.004 or newer.


pkgId: 9747318c32524c04d263421196946edadea86e9be3ca61a99f305e71c1a00797
name: perl-Module-Load
arch: armv5tel
version: 0.16
epoch: 1
release: 141.el6.1
summary: Runtime require of both modules and files
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Module-Load-0.16-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Module::Load eliminates the need to know whether you are trying to
  require either a file or a module.


pkgId: 7155b621da87ffc4a896e9a3724669e171f0f9cc05629101362f05c7058b2f73
name: perl-Module-Load-Conditional
arch: armv5tel
version: 0.30
epoch: 0
release: 141.el6.1
summary: Looking up module information / loading at runtime
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Module-Load-Conditional-0.30-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Module::Load::Conditional provides simple ways to query and possibly
  load
  any of the modules you have installed on your system during runtime.


pkgId: d393a6dfa87e22fa5d2f88c9d989817803cf6ae2bdf11a3c311cc3576d643fa9
name: perl-Module-Loaded
arch: armv5tel
version: 0.02
epoch: 1
release: 141.el6.1
summary: Mark modules as loaded or unloaded
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Module-Loaded-0.02-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  When testing applications, often you find yourself needing to provide
  functionality in your test environment that would usually be provided by
  external modules. Rather than munging the %INC by hand to mark these
  external modules as loaded, so they are not attempted to be loaded by
  perl, this module offers you a very simple way to mark modules as loaded
  and/or unloaded.


pkgId: 2ccfba8cc4bc5422ef5a4e8dc67a665d54f41ac5b3c7b9b09c888876378612e0
name: perl-Module-Refresh
arch: noarch
version: 0.13
epoch: 0
release: 5.el6
summary: Refresh %INC files when updated on disk
url: http://search.cpan.org/dist/Module-Refresh/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Module-Refresh-0.13-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Module-Refresh-0.13-5.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a generalization of the functionality provided by
  Apache::StatINC. It's designed to make it easy to do simple iterative
  development when working in a persistent environment.


pkgId: deb055890e9525ff25eeb36ea87ff3d598a548b49d7fed68c4403787eeb0d2f2
name: perl-Module-Runtime
arch: noarch
version: 0.012
epoch: 0
release: 1.el6
summary: Runtime module handling
url: http://search.cpan.org/dist/Module-Runtime/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Module-Runtime-0.012-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Module-Runtime-0.012-1.el6.noarch.rpm
checksum_type: sha256
description:
  The functions exported by this module deal with runtime handling of Perl
  modules, which are normally handled at compile time.


pkgId: b08a15bb21fb2d1a24b1daf249055d57b8990989fd7e5fa372493fbb24153823
name: perl-Module-ScanDeps
arch: noarch
version: 0.95
epoch: 0
release: 2.el6
summary: Recursively scan Perl code for dependencies
url: http://search.cpan.org/dist/Module-ScanDeps/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Module-ScanDeps-0.95-2.el6.src.rpm
location_href: perl-Module-ScanDeps-0.95-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module scans potential modules used by perl programs and returns a
  hash reference.  Its keys are the module names as appears in %INC (e.g.
  Test/More.pm).  The values are hash references.


pkgId: 3ea67eb93b7cb9770ccef5033add16b6f9001aee10c73380c9a3e02f64df680e
name: perl-Module-Signature
arch: noarch
version: 0.68
epoch: 0
release: 1.el6
summary: CPAN signature management utilities and modules
url: http://search.cpan.org/dist/Module-Signature/
rpm_license: CC0
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Module-Signature-0.68-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Module-Signature-0.68-1.el6.noarch.rpm
checksum_type: sha256
description:
  This package contains command line tools and utilities a module for
  checking and creating SIGNATURE files for Perl CPAN distributions.


pkgId: f42456bcd172ea24d598775593f46838da36ccb94c392e7be827ea44f40497cb
name: perl-Module-Signature
arch: noarch
version: 0.79
epoch: 0
release: 1.el6
summary: CPAN signature management utilities and modules
url: http://search.cpan.org/dist/Module-Signature/
rpm_license: CC0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Module-Signature-0.79-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Module-Signature-0.79-1.el6.noarch.rpm
checksum_type: sha256
description:
  This package contains a command line tool and module for checking and creating
  SIGNATURE files for Perl CPAN distributions.


pkgId: 737c20b3b29070fc86ee1b87f21e6348064bb2ca261973ef510aab4516c4b1e2
name: perl-Module-Versions-Report
arch: noarch
version: 1.06
epoch: 0
release: 3.el6
summary: Report versions of all modules in memory
url: http://search.cpan.org/dist/Module-Versions-Report/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Module-Versions-Report-1.06-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Module-Versions-Report-1.06-3.el6.noarch.rpm
checksum_type: sha256
description:
  If you add "use Module::Versions::Report;" to a program (especially
  handy if your program is one that demonstrates a bug in some module),
  then when the program has finished running, you well get a report
  detailing the all modules in memory, and noting the version of each
  (for modules that defined a $VERSION, at least).


pkgId: f07add89d5ca75e238d8df41f991f2c10d288be46811fc5a82582d778f47361b
name: perl-Mon
arch: noarch
version: 0.11
epoch: 0
release: 3.el6
summary: Mon Perl module
url: http://search.cpan.org/dist/Mon/
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Mon-0.11-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Mon-0.11-3.el6.noarch.rpm
checksum_type: sha256
description:
  This is the Perl5 module for interfacing with the Mon system monitoring
  package. Currently only the client interface is implemented, but more
  things like special logging routines and persistent monitors are being
  considered.


pkgId: f0ac587a419821521d9fa7d4e9b1bc847d1415580841ae7ea369134329ecf3d9
name: perl-Monitoring-Plugin
arch: noarch
version: 0.38
epoch: 0
release: 1.el6.1
summary: Family of modules to streamline writing plugins for various monitoring systems
url: http://search.cpan.org/dist/Monitoring-Plugin/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Monitoring-Plugin-0.38-1.el6.1.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Monitoring-Plugin-0.38-1.el6.1.noarch.rpm
checksum_type: sha256
description:
  Monitoring::Plugin and its associated Monitoring::Plugin::* modules are a
  family of perl modules to streamline writing Monitoring plugins. The main
  end user modules are Monitoring::Plugin, providing an object-oriented
  interface to the entire Monitoring::Plugin::* collection, and
  Monitoring::Plugin::Functions, providing a simpler functional interface to
  a useful subset of the available functionality.


pkgId: 662e5d4a64019309f0d570cc45a0d97faef8224c6cf6e31c06bbae50a94b1b5b
name: perl-MooseX-Aliases
arch: noarch
version: 0.10
epoch: 0
release: 1.el6
summary: Easy aliasing of methods and attributes in Moose
url: http://search.cpan.org/dist/MooseX-Aliases/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-MooseX-Aliases-0.10-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Aliases-0.10-1.el6.noarch.rpm
checksum_type: sha256
description:
  The MooseX::Aliases module will allow you to quickly alias methods in
  Moose. It provides an alias parameter for has() to generate aliased
  accessors as well as the standard ones. Attributes can also be initialized
  in the constructor via their aliased names.


pkgId: 47004e2ca894f4e33c855c53a0967830c8fd3110ab038a9981bf5fa229c5a2c9
name: perl-MooseX-AttributeHelpers
arch: noarch
version: 0.23
epoch: 0
release: 9.el6
summary: Extended Moose attribute interfaces
url: http://search.cpan.org/dist/MooseX-AttributeHelpers/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-MooseX-AttributeHelpers-0.23-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-AttributeHelpers-0.23-9.el6.noarch.rpm
checksum_type: sha256
description:
  While Moose attributes provide you with a way to name your accessors,
  readers, writers, clearers and predicates, this library provides commonly
  used attribute helper methods for more specific types of data.


pkgId: 6f6c60b81359ee7ec57a1158a290b1fbc8b53d7e35b524dd98f98a31d3ca7e3d
name: perl-MooseX-Daemonize
arch: noarch
version: 0.15
epoch: 0
release: 4.el6
summary: Role for daemonizing your Moose based application
url: http://search.cpan.org/dist/MooseX-Daemonize/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-MooseX-Daemonize-0.15-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Daemonize-0.15-4.el6.noarch.rpm
checksum_type: sha256
description:
  Often you want to write a persistent daemon that has a pid file, and
  responds appropriately to Signals. This module provides a set of basic
  roles as an infrastructure to do that.


pkgId: d619d2dc0437cf8986c9c7fb7c847c0e5d2eea4f2e76536d673e96c5cde0ba30
name: perl-MooseX-Emulate-Class-Accessor-Fast
arch: noarch
version: 0.00903
epoch: 0
release: 4.el6
summary: Emulate Class::Accessor::Fast behavior using Moose attributes
url: http://search.cpan.org/dist/MooseX-Emulate-Class-Accessor-Fast
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-MooseX-Emulate-Class-Accessor-Fast-0.00903-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Emulate-Class-Accessor-Fast-0.00903-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module attempts to emulate the behavior of Class::Accessor::Fast
  as accurately as possible using the Moose attribute system. The public
  API of "Class::Accessor::Fast" is wholly supported, but the private
  methods are not.  If you are only using the public methods (as you
  should) migration should be a matter of switching your "use base" line
  to a "with" line.


pkgId: ff7d26ce93833e86555c86b201df56417130750b0022755b1c2545599cb8f142
name: perl-MooseX-Meta-TypeConstraint-ForceCoercion
arch: noarch
version: 0.01
epoch: 0
release: 9.el6
summary: Force coercion when validating type constraints
url: http://search.cpan.org/dist/MooseX-Meta-TypeConstraint-ForceCoercion/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-MooseX-Meta-TypeConstraint-ForceCoercion-0.01-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Meta-TypeConstraint-ForceCoercion-0.01-9.el6.noarch.rpm
checksum_type: sha256
description:
  This class allows to wrap any Moose::Meta::TypeConstraint in a way that
  will force coercion of the value when checking or validating a value
  against it.


pkgId: 18e51cd9074cb607b45c9f552b650b5cec23d000839810995a6d1315826ef247
name: perl-MooseX-Role-Parameterized
arch: noarch
version: 0.27
epoch: 0
release: 2.el6
summary: Make your roles flexible through parameterization
url: http://search.cpan.org/dist/MooseX-Role-Parameterized
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-MooseX-Role-Parameterized-0.27-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Role-Parameterized-0.27-2.el6.noarch.rpm
checksum_type: sha256
description:
  Roles are composable units of behavior. They are useful for factoring out
  functionality common to many classes from any part of your class hierarchy.
  (See Moose::Cookbook::Roles::Recipe1 for an introduction to Moose::Role.)

  While combining roles affords you a great deal of flexibility, individual
  roles have very little in the way of configurability. Core Moose provides
  alias for renaming methods to avoid conflicts, and excludes for ignoring
  methods you don't want or need (see Moose::Cookbook::Roles::Recipe2 for more
  about alias and excludes).

  Because roles serve many different masters, they usually provide only the
  least common denominator of functionality. To empower roles further, more
  configurability than alias and excludes is required. Perhaps your role needs
  to know which method to call when it is done. Or what default value to use for
  its url attribute.

  Parameterized roles offer exactly this solution.


pkgId: 6d64e092f912a15a83bbe1fb7e57e83fd35a86b180e2916efdf83ea12fcff018
name: perl-MooseX-Role-WithOverloading
arch: armv5tel
version: 0.09
epoch: 0
release: 1.el6
summary: Roles which support overloading
url: http://search.cpan.org/dist/MooseX-Role-WithOverloading
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-MooseX-Role-WithOverloading-0.09-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Role-WithOverloading-0.09-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  MooseX::Role::WithOverloading allows you to write a Moose::Role
  that defines overloaded operators and allows those operator
  overloadings to be composed into the classes/roles/instances it's
  compiled to, while plain roles would lose the overloading.


pkgId: 1fe27db72c5da353a27a8d7d1d7e7d657dc1bcaa71abc1704b940413721390c7
name: perl-MooseX-Types
arch: noarch
version: 0.22
epoch: 0
release: 1.el6
summary: Organise your Moose types in libraries
url: http://search.cpan.org/dist/MooseX-Types
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-MooseX-Types-0.22-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Types-0.22-1.el6.noarch.rpm
checksum_type: sha256
description:
  The types provided with the Moose manpage are by design global. This
  package helps you to organise and selectively import your own and the
  built-in types in libraries. As a nice side effect, it catches typos at
  compile-time too.

  However, the main reason for this module is to provide an easy way to not
  have conflicts with your type names, since the internal fully qualified
  names of the types will be prefixed with the library's name.

  This module will also provide you with some helper functions to make it
  easier to use Moose types in your code.


pkgId: 105d3920695e93aa17315fd46bc92fe910aaa604657ac80eae5284dcb592d69e
name: perl-MooseX-Types-Path-Class
arch: noarch
version: 0.05
epoch: 0
release: 8.el6
summary: A Path::Class type library for Moose
url: http://search.cpan.org/dist/MooseX-Types-Path-Class
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-MooseX-Types-Path-Class-0.05-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MooseX-Types-Path-Class-0.05-8.el6.noarch.rpm
checksum_type: sha256
description:
  MooseX::Types::Path::Class creates common Moose types, coercions and option
  specifications useful for dealing with Path::Class objects as Moose attributes.

  Coercions (see Moose::Util::TypeConstraints) are made from both 'Str' and
  'ArrayRef' to both Path::Class::Dir and Path::Class::File objects.  If you
  have MooseX::Getopt installed, the Getopt option type ("=s") will be added
  for both Path::Class::Dir and Path::Class::File.


pkgId: b34caa658e6d1b8c2657f645ee4b99964358c6d6835348b8c620f91431ea38c7
name: perl-MouseX-Types
arch: noarch
version: 0.05
epoch: 0
release: 2.el6
summary: Organize your Mouse types in libraries
url: http://search.cpan.org/dist/MouseX-Types
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-MouseX-Types-0.05-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-MouseX-Types-0.05-2.el6.noarch.rpm
checksum_type: sha256
description:
  Organize your Mouse types; much as MooseX::Types does for your Moose types.
  For more information, please see the MooseX::Types manpage.

  This library was split off from Mouse as of Mouse 0.15.


pkgId: 2b4ad4d6b491ded4c4304ab59b477a6f8cd35a949301e9239e5bdc4cec4b3bfb
name: perl-NKF
arch: armv5tel
version: 2.0.8b
epoch: 1
release: 6.2.el6
summary: Perl extension for Network Kanji Filter
url: http://nkf.sourceforge.jp/
rpm_license: BSD
rpm_group: Applications/Text
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: nkf-2.0.8b-6.2.el6.src.rpm
location_href: perl-NKF-2.0.8b-6.2.el6.armv5tel.rpm
checksum_type: sha256
description:
  This is a Perl Extension version of nkf (Network Kanji Filter).
  It converts the last argument and return converted result.
  Conversion details are specified by flags before the last argument.


pkgId: 995a59e4a0ba7829f1de200e8f45bb836f8f1eb091fc8cbb3c26768fbe4a5378
name: perl-NOCpulse-CLAC
arch: noarch
version: 1.9.8
epoch: 0
release: 3.el6
summary: NOCpulse Command Line Application framework for Perl
url: https://fedorahosted.org/spacewalk
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-NOCpulse-CLAC-1.9.8-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-NOCpulse-CLAC-1.9.8-3.el6.noarch.rpm
checksum_type: sha256
description:
  NOCpulse provides application, network, systems and transaction monitoring,
  coupled with a comprehensive reporting system including availability,
  historical and trending reports in an easy-to-use browser interface.

  This packages provides a framework for writing command line oriented
  applications.


pkgId: a1e559b2891a69bf1cc514ad72ef3faf93d7a5dc565211e43094b3210cca2a25
name: perl-NOCpulse-SetID
arch: noarch
version: 1.6.9
epoch: 0
release: 3.el6
summary: Provides api for correctly changing user identity
url: https://fedorahosted.org/spacewalk
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-NOCpulse-SetID-1.6.9-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-NOCpulse-SetID-1.6.9-3.el6.noarch.rpm
checksum_type: sha256
description:
  NOCpulse provides application, network, systems and transaction monitoring,
  coupled with a comprehensive reporting system including availability,
  historical and trending reports in an easy-to-use browser interface.

  This package provides API for correctly changing user identity.


pkgId: a3989cfa370c8795b792e4ddcb61f9a8b628c3525ad82ca6fa2fa9164593c648
name: perl-NOCpulse-Utils
arch: noarch
version: 1.14.11
epoch: 0
release: 3.el6
summary: NOCpulse utility packages
url: https://fedorahosted.org/spacewalk
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-NOCpulse-Utils-1.14.11-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-NOCpulse-Utils-1.14.11-3.el6.noarch.rpm
checksum_type: sha256
description:
  NOCpulse provides application, network, systems and transaction monitoring,
  coupled with a comprehensive reporting system including availability,
  historical and trending reports in an easy-to-use browser interface.

  This package provides miscellaneous utility modules.


pkgId: fde2fa29dcf761f454116fa830292a73a9e6ab8a3b6e11da72bb46af97bc7a53
name: perl-NTLM
arch: noarch
version: 1.09
epoch: 0
release: 1.el6
summary: NTLM Perl module
url: http://search.cpan.org/dist/NTLM/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-NTLM-1.09-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-NTLM-1.09-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides methods to use NTLM authentication.  It can be used
  as an authenticate method with the Mail::IMAPClient module to perform
  the challenge/response mechanism for NTLM connections or it can be used
  on its own for NTLM authentication with other protocols (eg. HTTP).


pkgId: 3daa97593944bd03817dfc0ee9e59d1ac649b6e3fd22abd014bc366c727971d1
name: perl-Nagios-Plugin
arch: noarch
version: 0.35
epoch: 0
release: 1.el6
summary: Family of perl modules to streamline writing Nagios plugins
url: http://search.cpan.org/dist/Nagios-Plugin/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Nagios-Plugin-0.35-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Nagios-Plugin-0.35-1.el6.noarch.rpm
checksum_type: sha256
description:
  Nagios::Plugin and its associated Nagios::Plugin::* modules are a family of
  perl modules to streamline writing Nagios plugins. The main end user
  modules are Nagios::Plugin, providing an object-oriented interface to the
  entire Nagios::Plugin::* collection, and Nagios::Plugin::Functions,
  providing a simpler functional interface to a useful subset of the
  available functionality.


pkgId: 9266690b40111b0d10f3972c68c44855b25651d0bc68e08d7e4c3c7471213450
name: perl-Nagios-Plugin-WWW-Mechanize
arch: noarch
version: 0.13
epoch: 0
release: 3.el6
summary: Login to a web page as a user and get data as a Nagios plugin
url: http://search.cpan.org/dist/Nagios-Plugin-WWW-Mechanize/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Nagios-Plugin-WWW-Mechanize-0.13-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Nagios-Plugin-WWW-Mechanize-0.13-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module ties Nagios::Plugin with WWW::Mechanize so that there's less
  code in your perl script and the most common work is done for you.


pkgId: ef4f9328ec4efccf04ad72bc28149f55584934c27f2a72f7cff8383a777e6bd6
name: perl-Net-ARP
arch: armv5tel
version: 1.0.6
epoch: 0
release: 2.1.el6
summary: Create and Send ARP Packets
url: http://search.cpan.org/dist/Net-ARP
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-ARP-1.0.6-2.1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-ARP-1.0.6-2.1.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module is a Perl extension to create and send ARP packets and lookup
  local or remote mac addresses. You do not need to install any additional
  libraries like Libnet to compile this extension. It uses kernel header files
  to create the packets.


pkgId: 03e4402c46fa887fd941edd450af43b70f2807716fbe46271eb7a18e88c1e524
name: perl-Net-Amazon-EC2-Metadata
arch: noarch
version: 0.10
epoch: 0
release: 4.el6
summary: Retrieves data from EC2 Metadata service
url: http://search.cpan.org/dist/Net-Amazon-EC2-Metadata/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Net-Amazon-EC2-Metadata-0.10-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Amazon-EC2-Metadata-0.10-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module queries Amazon's Elastic Compute Cloud Metadata service.
  It also fetches 'user_data' which follows the same API but is often no
  considered part of the metadata service by Amazons documentation. The
  module also ships with a command line tool ec2meta that provides the same
  data.


pkgId: c82a08ad1cb0429ba425fcc9face558711d8b80f92c64c00433b9368ce93fe7c
name: perl-Net-Appliance-Session
arch: noarch
version: 3.122100
epoch: 0
release: 2.el6
summary: Run command-line sessions to network appliances
url: http://search.cpan.org/dist/Net-Appliance-Session/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-Appliance-Session-3.122100-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Appliance-Session-3.122100-2.el6.noarch.rpm
checksum_type: sha256
description:
  Use this module to establish an interactive command-line session with a
  network appliance. There is special support for moving into "privileged"
  mode and "configure" mode, along with the ability to send commands to the
  connected device and retrieve returned output.


pkgId: f224113b45876f1f1f1f6b66c430fcecf266cc43cc0f55dc70829cf760ece046
name: perl-Net-CIDR
arch: noarch
version: 0.14
epoch: 0
release: 1.el6
summary: Manipulate IPv4/IPv6 netblocks in CIDR notation
url: http://search.cpan.org/dist/Net-CIDR/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Net-CIDR-0.14-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-CIDR-0.14-1.el6.noarch.rpm
checksum_type: sha256
description:
  The Net::CIDR package contains functions that manipulate lists of IP
  netblocks expressed in CIDR notation. The Net::CIDR functions handle both
  IPv4 and IPv6 addresses.


pkgId: 1ab1b520178e588334d9e22a207e81f1745eaa038ca1409ffb4b8951162a5fe1
name: perl-Net-CIDR
arch: noarch
version: 0.18
epoch: 0
release: 1.el6
summary: Manipulate IPv4/IPv6 netblocks in CIDR notation
url: http://search.cpan.org/dist/Net-CIDR/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-CIDR-0.18-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-CIDR-0.18-1.el6.noarch.rpm
checksum_type: sha256
description:
  The Net::CIDR package contains functions that manipulate lists of IP netblocks
  expressed in CIDR notation. The Net::CIDR functions handle both IPv4 and IPv6
  addresses.


pkgId: a29a1509c87028ecff9088157107e0d25da7ee1a0324c7d826522836b9f2761e
name: perl-Net-CIDR-Lite
arch: noarch
version: 0.21
epoch: 0
release: 1.el6
summary: Net::CIDR::Lite Perl module
url: http://search.cpan.org/dist/Net-CIDR-Lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Net-CIDR-Lite-0.21-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-CIDR-Lite-0.21-1.el6.noarch.rpm
checksum_type: sha256
description:
  Faster alternative to Net::CIDR when merging a large number of CIDR
  address ranges. Works for IPv4 and IPv6 addresses.


pkgId: 677a7f5e52eaf2242a510da97dbc9e0f937b98212196619d57af4ec5610f3c9f
name: perl-Net-CLI-Interact
arch: noarch
version: 1.122100
epoch: 0
release: 2.el6
summary: Toolkit for CLI Automation
url: http://search.cpan.org/dist/Net-CLI-Interact/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-CLI-Interact-1.122100-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-CLI-Interact-1.122100-2.el6.noarch.rpm
checksum_type: sha256
description:
  Automating command line interface (CLI) interactions is not a new idea, but
  can be tricky to implement. This module aims to provide a simple and
  manageable interface to CLI interactions, supporting:


pkgId: 2483d91a17c287b6b742244363d6cc3d5d3745fcfeaa20e07bc633f4fa3d6b91
name: perl-Net-CUPS
arch: armv5tel
version: 0.61
epoch: 0
release: 3.el6
summary: Perl bindings to the CUPS C API Interface
url: http://search.cpan.org/dist/Net-CUPS/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Net-CUPS-0.61-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-CUPS-0.61-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  Net::CUPS is an interface to the Common Unix Printing System API.  If you feel
  an urge to control CUPS servers via Perl, this is a good way to do it :)


pkgId: f773844be94f1bdfa3246361e369f239cc09139ae144e6ea376b51682d5ba379
name: perl-Net-DBus
arch: armv5tel
version: 0.33.6
epoch: 0
release: 8.el6
summary: Use and provide DBus services
url: http://search.cpan.org/dist/Net-DBus/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Net-DBus-0.33.6-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-DBus-0.33.6-8.el6.armv5tel.rpm
checksum_type: sha256
description:
  Net::DBus provides a Perl API for the DBus message system. The DBus Perl
  interface is currently operating against the 0.33 development version of
  DBus, but should work with later versions too, providing the API changes
  have not been too drastic.


pkgId: ac89682f5478784c25782b5ce9238ca831aa10f8c41557aad445d3dc4c306754
name: perl-Net-DNS
arch: armv5tel
version: 0.65
epoch: 0
release: 5.el6
summary: DNS resolver modules for Perl
url: http://www.net-dns.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva2.redsleeve.org
rpm_sourcerpm: perl-Net-DNS-0.65-5.el6.src.rpm
location_href: perl-Net-DNS-0.65-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  Net::DNS is a collection of Perl modules that act as a Domain Name
  System (DNS) resolver. It allows the programmer to perform DNS queries
  that are beyond the capabilities of gethostbyname and gethostbyaddr.

  The programmer should be somewhat familiar with the format of a DNS
  packet and its various sections. See RFC 1035 or DNS and BIND (Albitz
  & Liu) for details.


pkgId: e2245dceedabd8b307362f8162d26675f99f5d1293a8ca1e17128c3317e512d5
name: perl-Net-DNS-Resolver-Programmable
arch: noarch
version: 0.003
epoch: 0
release: 5.el6
summary: Programmable DNS resolver class for offline emulation of DNS
url: http://search.cpan.org/dist/Net-DNS-Resolver-Programmable/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Net-DNS-Resolver-Programmable-0.003-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-DNS-Resolver-Programmable-0.003-5.el6.noarch.rpm
checksum_type: sha256
description:
  Net::DNS::Resolver::Programmable is a Net::DNS::Resolver descendant class
  that allows a virtual DNS to be emulated instead of querying the real DNS.
  A set of static DNS records may be supplied, or arbitrary code may be
  specified as a means for retrieving DNS records, or even generating them
  on the fly.


pkgId: 150a9fea8aad31a202d8673fa8b1d22ae4c1479ae0c7583c9fdee11068d35d81
name: perl-Net-DNS-SEC
arch: noarch
version: 0.17
epoch: 0
release: 1.el6
summary: DNSSEC modules for Perl
url: http://search.cpan.org/dist/Net-DNS-SEC/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Net-DNS-SEC-0.17-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-DNS-SEC-0.17-1.el6.noarch.rpm
checksum_type: sha256
description:
  The Net::DSN::SEC suite provides the resource records that are needed
  for DNSSEC (RFC 4033, 4034 and 4035).

  It also provides support for SIG0. That later is useful for dynamic
  updates using key-pairs.

  RSA and DSA crypto routines are supported.


pkgId: 7e14c26f1ae8f109a495ef0584471a62bf4740c8fc668dde731a0fdfc53fa974
name: perl-Net-Daemon
arch: noarch
version: 0.44
epoch: 0
release: 7.el6
summary: Perl extension for portable daemons
url: http://search.cpan.org/dist/Net-Daemon/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Net-Daemon-0.44-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Daemon-0.44-7.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Daemon is an abstract base class for implementing portable server
  applications in a very simple way. The module is designed for Perl 5.006 and
  ithreads (and higher), but can work with fork() and Perl 5.004.

  The Net::Daemon class offers methods for the most common tasks a daemon
  needs: Starting up, logging, accepting clients, authorization, restricting
  its own environment for security and doing the true work. You only have to
  override those methods that aren't appropriate for you, but typically
  inheriting will safe you a lot of work anyways.


pkgId: 4f5145f4359d6f89329a46410b15e44a4afb91269129273e61f332c9e0d256a1
name: perl-Net-Domain-TLD
arch: noarch
version: 1.68
epoch: 0
release: 2.el6
summary: Work with TLD names
url: http://search.cpan.org/dist/Net-Domain-TLD
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Net-Domain-TLD-1.68-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Domain-TLD-1.68-2.el6.noarch.rpm
checksum_type: sha256
description:
  The purpose of this module is to provide user with current list of
  available top level domain names including new ICANN additions and ccTLDs.


pkgId: 7ccf35b79e3f2a226b47145a2adf006a7a84fad809591033541d58ac06db0ffc
name: perl-Net-FTP-RetrHandle
arch: noarch
version: 0.2
epoch: 0
release: 3.el6
summary: Provides a file reading interface for reading files on a remote FTP server
url: http://search.cpan.org/~giff/Net-FTP-RetrHandle-0.2/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Net-FTP-RetrHandle-0.2-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-FTP-RetrHandle-0.2-3.el6.noarch.rpm
checksum_type: sha256
description:
  Support for skipping the beginning of the file is implemented with the FTP REST
  command, which starts a retrieval at any point in the file. Support for
  skipping the end of the file is implemented with the FTP ABOR command, which
  stops the transfer. With these two commands and some careful tracking of the
  current file position, we're able to reliably emulate a seek/read pair, and get
  only the parts of the file that are actually read.

  This was originally designed for use with Archive::Zip; it's reliable enough
  that the table of contents and individual files can be extracted from a remote
  ZIP archive without downloading the whole thing.

  An interface compatible with IO::Handle is provided, along with a tie-based


pkgId: dbf8e24b96945ce7218a3927eaf0fc8062d2a9c5b250977445ec6a4b5a15c4ab
name: perl-Net-FTPSSL
arch: noarch
version: 0.15
epoch: 0
release: 1.el6
summary: Perl module for FTP over SSL/TLS
url: http://search.cpan.org/dist/Net-FTPSSL/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Net-FTPSSL-0.15-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-FTPSSL-0.15-1.el6.noarch.rpm
checksum_type: sha256
description:
  Net::FTPSSL is a class implementing a simple FTP client over a Secure
  Sockets Layer (SSL) or Transport Layer Security (TLS) connection written in
  Perl as described in RFC959 and RFC2228. It will use TLS by default.


pkgId: bb938ff100cf731316cb0baa27bdfc98e5c4edfa24905bea6c45950c9f378b1f
name: perl-Net-IDN-Encode
arch: armv5tel
version: 2.201
epoch: 0
release: 2.el6
summary: Internationalizing Domain Names in Applications (IDNA)
url: http://search.cpan.org/dist/Net-IDN-Encode/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-IDN-Encode-2.201-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-IDN-Encode-2.201-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides an easy-to-use interface for encoding and decoding
  Internationalized Domain Names (IDNs).


pkgId: 1661d86593f439b8832b0e2c66cdff36d3773699b7b02b901710098695bf5628
name: perl-Net-IP
arch: noarch
version: 1.25
epoch: 0
release: 13.el6
summary: Perl module for manipulation of IPv4 and IPv6 addresses
url: http://search.cpan.org/dist/Net-IP/
rpm_license: MIT and (GPL+ or Artistic)
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Net-IP-1.25-13.el6.src.rpm
location_href: perl-Net-IP-1.25-13.el6.noarch.rpm
checksum_type: sha256
description:
  This is the Net::IP module for Perl, designed to allow easy
  manipulation of IPv4 and IPv6 addresses.  Two applications using the
  Net::IP module are included: ipcount, an IP address mini-calculator,
  it can calculate the number of IP addresses in a prefix or all the
  prefixes contained in a given range; and iptab, which prints out a
  handy IP "cheat sheet".


pkgId: 3d7ed6becc8473b0089e843c109c64cdfc44d0d26cbc778d5beb2a085b6dbc64
name: perl-Net-IP-CMatch
arch: armv5tel
version: 0.02
epoch: 0
release: 10.el6
summary: Efficiently match IP addresses against IP ranges with C
url: http://search.cpan.org/dist/Net-IP-CMatch/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-IP-CMatch-0.02-10.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-IP-CMatch-0.02-10.el6.armv5tel.rpm
checksum_type: sha256
description:
  Net::IP::CMatch is based upon, and does the same thing as Net::IP::Match. The
  unconditionally exported subroutine 'match_ip' determines if the IP to match
  (first argument) matches any of the subsequent IP arguments. Match arguments
  may be absolute quads, as '127.0.0.1', or contain mask bits as
  '111.245.76.248/29'. A true return value indicates a match. It was written in
  C, rather than a macro, preprocessed through perl's source filter mechanism
  (as is Net::IP::Match), so that the IP arguments could be traditional perl
  scalars. The C code is lean and mean (IMHO).


pkgId: 65d4e37139f9e7eac62da774c6fb5ccf97794910b18b479cf7e4d26a032fde6f
name: perl-Net-IP-Match-Regexp
arch: noarch
version: 1.01
epoch: 0
release: 1.el6
summary: Efficiently match IP addresses against ranges
url: http://search.cpan.org/dist/Net-IP-Match-Regexp/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Net-IP-Match-Regexp-1.01-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-IP-Match-Regexp-1.01-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module allows you to check an IP address against one or more IP
  ranges. It employs Perl's highly optimized regular expression engine to do
  the hard work, so it is very fast. It is optimized for speed by doing the
  match against a regexp which implicitly checks the broadest IP ranges
  first. An advantage is that the regexp can be computed and stored in
  advance (in source code, in a database table, etc) and reused, saving much
  time if the IP ranges don't change too often. The match can optionally
  report a value (e.g. a network name) instead of just a boolean, which makes
  module useful for mapping IP ranges to names or codes or anything else.


pkgId: 11edb05365af9a7f91b595e96ae111d13c9809c2727a2951b946708dad0953cf
name: perl-Net-IPv4Addr
arch: noarch
version: 0.10
epoch: 0
release: 6.el6
summary: Perl extension for manipulating IPv4 addresses
url: http://search.cpan.org/dist/Net-IPv4Addr/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Net-IPv4Addr-0.10-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-IPv4Addr-0.10-6.el6.noarch.rpm
checksum_type: sha256
description:
  Net::IPv4Addr provides functions for parsing IPv4 addresses both in traditional
  address/netmask format and in the new CIDR format. There are also methods for
  calculating the network and broadcast address and also to see check if a given
  address is in a specific network.


pkgId: 83bf5708b02822aab684f938a4826b6ea48c00801f1866a3dc4c0748e11bb1d9
name: perl-Net-IPv6Addr
arch: noarch
version: 0.2
epoch: 0
release: 6.el6
summary: Perl module to check validity of IPv6 addresses
url: http://search.cpan.org/dist/Net-IPv6Addr/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-IPv6Addr-0.2-6.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-IPv6Addr-0.2-6.el6.noarch.rpm
checksum_type: sha256
description:
  Net::IPv6Addr checks strings for valid IPv6 addresses, as specified in
  RFC1884. You throw possible addresses at it, it either accepts them or throws
  an exception.


pkgId: 661302454c83a5f225a0daac64f0ad8646c4c60d9b713db110a93fa6a1c596cc
name: perl-Net-Jabber
arch: noarch
version: 2.0
epoch: 0
release: 12.el6
summary: Net::Jabber - Jabber Perl Library
url: http://search.cpan.org/dist/Net-Jabber/
rpm_license: (GPL+ or Artistic) or LGPLv2+
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Net-Jabber-2.0-12.el6.src.rpm
location_href: perl-Net-Jabber-2.0-12.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Jabber provides a Perl user with access to the Jabber Instant
  Messaging protocol.

  For more information about Jabber visit:

      http://www.jabber.org


pkgId: 8906b89aede236c6eda7deefbf5ccd108eb0f18b502ef6f07af8f935296af449
name: perl-Net-LibIDN
arch: armv5tel
version: 0.12
epoch: 0
release: 3.el6
summary: Perl bindings for GNU LibIDN
url: http://search.cpan.org/dist/Net-LibIDN/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Net-LibIDN-0.12-3.el6.src.rpm
location_href: perl-Net-LibIDN-0.12-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  Provides perl bindings for GNU Libidn, a C library for
  handling Internationalized Domain Names according to
  IDNA (RFC 3490), in a way very much inspired by Turbo
  Fredriksson's PHP-IDN.


pkgId: 9b95bde17db6ad75af516f6d35e541d8f5548f6c039657a3e74c1d42005a37a3
name: perl-Net-Netmask
arch: noarch
version: 1.9015
epoch: 0
release: 8.el6
summary: Perl module for manipulation and lookup of IP network blocks
url: http://search.cpan.org/dist/Net-Netmask/
rpm_license: Copyright only
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Net-Netmask-1.9015-8.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Netmask-1.9015-8.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Netmask parses and understands IPv4 CIDR blocks. It's built with
  an object-oriented interface. Nearly all functions are methods that
  operate on a Net::Netmask object.


pkgId: 02ec9b551d97b4433d2640ef2ab745f32169cc210b39ab2af2752297b84dad6a
name: perl-Net-OAuth
arch: noarch
version: 0.28
epoch: 0
release: 1.el6
summary: OAuth protocol support library for Perl
url: http://search.cpan.org/dist/Net-OAuth/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-OAuth-0.28-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-OAuth-0.28-1.el6.noarch.rpm
checksum_type: sha256
description:
  Perl implementation of OAuth, an open protocol to allow secure API
  authentication in a simple and standard method from desktop and web
  applications. In practical terms, a mechanism for a Consumer to request
  protected resources from a Service Provider on behalf of a user.


pkgId: 79adbfc057485e8af41d4a63178d7edd13d93c1bcac98da171c5928511445794
name: perl-Net-POP3S
arch: noarch
version: 0.05
epoch: 0
release: 1.el6
summary: SSL/STARTTLS support for Net::POP3
url: http://search.cpan.org/dist/Net-POP3S/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-POP3S-0.05-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-POP3S-0.05-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements a wrapper for Net::POP3, enabling over-SSL/STARTTLS
  support. This module inherits all the methods from Net::POP3. You may use
  all the friendly options that came bundled with Net::POP3. You can control
  the SSL usage with the options of new() constructor method. 'doSSL' option
  is the switch, and, If you would like to control detailed SSL settings, you
  can set SSL_* options that are brought from IO::Socket::SSL. Please see the
  document of IO::Socket::SSL about these options detail.


pkgId: 0a27a67f7b6e777f69e47ab4ecc8ae6052cef0548059f23e98da52de60cc0ed8
name: perl-Net-Patricia
arch: armv5tel
version: 1.17_01
epoch: 0
release: 1.el6
summary: Patricia Trie perl module for fast IP address lookups
url: http://search.cpan.org/dist/Net-Patricia/
rpm_license: Distributable, see COPYING
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Net-Patricia-1.17_01-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Patricia-1.17_01-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module uses a Patricia Trie data structure to quickly perform IP
  address prefix matching for applications such as IP subnet, network or
  routing table lookups.  The data structure is based on a radix tree using a
  radix of two, so sometimes you see patricia implementations called "radix"
  as well.  The term "Trie" is derived from the word "retrieval" but is
  pronounced like "try".  Patricia stands for "Practical Algorithm to
  Retrieve Information Coded as Alphanumeric", and was first suggested for
  routing table lookups by Van Jacobsen.  Patricia Trie performance
  characteristics are well-known as it has been employed for routing table
  lookups within the BSD kernel since the 4.3 Reno release.


pkgId: 79d8f945f765102dbc48825984101ede658b5b0e8728350ea4ecc1b74df95aab
name: perl-Net-Pcap-Easy
arch: noarch
version: 1.4210
epoch: 0
release: 1.el6
summary: Convenience functions to make Net::Pcap easier to use
url: http://search.cpan.org/dist/Net-Pcap-Easy/
rpm_license: ASL 2.0
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Net-Pcap-Easy-1.4210-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Pcap-Easy-1.4210-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module is little more than a collection of macros and convenience
  functions. Net::Pcap does all the real work (of lifting libpcap into
  perl anyway).


pkgId: c7d2991130d6537308b3e1965c7531a9596719aaf2d978073d41ff87df7019f4
name: perl-Net-SFTP-Foreign
arch: noarch
version: 1.81
epoch: 0
release: 3.el6
summary: SSH File Transfer Protocol client
url: http://search.cpan.org/dist/Net-SFTP-Foreign
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Net-SFTP-Foreign-1.81-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-SFTP-Foreign-1.81-3.el6.noarch.rpm
checksum_type: sha256
description:
  Net::SFTP::Foreign is a Perl client for the SFTP version 3 as defined in the SSH
  File Transfer Protocol IETF draft, draft-ietf-secsh-filexfer-02.txt, included on
  this package distribution, on the rfc directory.

  Net::SFTP::Foreign uses any compatible ssh command installed on the system (for
  instance, OpenSSH ssh) to establish the secure connection to the remote server.

  A wrapper module Net::SFTP::Foreign::Compat is also provided for compatibility
  with Net::SFTP.


pkgId: fd2f11af547a7a873b0258824bd9f959f92cc96cdafa9ea3b5e7eb309cc2ffe7
name: perl-Net-SMTPS
arch: noarch
version: 0.04
epoch: 0
release: 1.el6
summary: SSL/STARTTLS support for Net::SMTP
url: http://search.cpan.org/dist/Net-SMTPS/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-SMTPS-0.04-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-SMTPS-0.04-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements a wrapper for Net::SMTP, enabling over-SSL/STARTTLS
  support. This module inherits all the methods from Net::SMTP. You may use
  all the friendly options that came bundled with Net::SMTP. You can control
  the SSL usage with the options of new() constructor method. 'doSSL' option
  is the switch, and, If you would like to control detailed SSL settings, you
  can set SSL_* options that are brought from IO::Socket::SSL. Please see the
  document of IO::Socket::SSL about these options detail.


pkgId: 52de782647d53f8a3a700808c6296388230f3bbe5067905f19f0d1b20b2806c0
name: perl-Net-SNMP
arch: noarch
version: 5.2.0
epoch: 0
release: 4.el6
summary: Object oriented interface to SNMP
url: http://search.cpan.org/dist/Net-SNMP/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Net-SNMP-5.2.0-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-SNMP-5.2.0-4.el6.noarch.rpm
checksum_type: sha256
description:
  The Net::SNMP module implements an object oriented interface to the
  Simple Network Management Protocol.  Perl applications can use the
  module to retrieve or update information on a remote host using the
  SNMP protocol.  The module supports SNMP version-1, SNMP version-2c
  (Community-Based SNMPv2), and SNMP version-3.  The Net::SNMP module
  assumes that the user has a basic understanding of the Simple Network
  Management Protocol and related network management concepts.


pkgId: ef540d0e1dcf1644425618c06a15b98d7c05885358a309f16a82b158dc8d1e8a
name: perl-Net-SSH
arch: noarch
version: 0.09
epoch: 0
release: 3.el6
summary: Perl extension for secure shell
url: http://search.cpan.org/dist/Net-SSH/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-Net-SSH-0.09-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-SSH-0.09-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to ssh.  It is a simple
  wrapper around the system `ssh' command.  For an all-perl
  implementation that does not require the system `ssh' command, see
  Net::SSH::Perl.


pkgId: 51b8ed47852b11a1df69fbb6feec55c93aed7288c2123b4e223c675ffd051b15
name: perl-Net-SSH-Expect
arch: noarch
version: 1.09
epoch: 0
release: 7.el6
summary: Net-SSH-Expect - SSH wrapper to execute remote commands
url: http://search.cpan.org/dist/Net-SSH-Expect/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-SSH-Expect-1.09-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-SSH-Expect-1.09-7.el6.noarch.rpm
checksum_type: sha256
description:
  This module is a wrapper to the *ssh* executable that is available in
  your system's *$PATH*. Use this module to execute commands on the
  remote SSH server. It authenticates with the user and password you
  passed in the constructor's attributes "user" and "password".

  Once an ssh connection was started using the "connect()" method it will
  remain open until you call the "close()" method. This allows you execute
  as many commands as you want with the "exec()" method using only one
  connection. This is a better approach over other ssh wrapper
  implementations, i.e: Net::SCP, Net::SSH and Net::SCP::Expect, that
  start a new ssh connection each time a remote command is issued or a
  file is transfered.

  It uses *Expect.pm* module to interact with the SSH server. A
  "get_expect()" method is provided so you can obtain the internal
  "Expect" object connected to the SSH server. Use this only if you have
  some special need that you can't do with the "exec()" method.

  This module was inspired by Net::SCP::Expect
  <http://search.cpan.org/~djberg/Net-SCP-Expect-0.12/Expect.pm>
  and by Net::Telnet and some of its methods work the same as these two
  modules.


pkgId: f4c48128262baeba4f37447ec0facef8a3b64fa9b9a019210285110f5655f504
name: perl-Net-SSH-Perl
arch: noarch
version: 1.34
epoch: 0
release: 9.el6
summary: SSH (Secure Shell) client
url: http://search.cpan.org/dist/Net-SSH-Perl/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-SSH-Perl-1.34-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-SSH-Perl-1.34-9.el6.noarch.rpm
checksum_type: sha256
description:
  Net::SSH::Perl is an all-Perl module implementing an SSH (Secure Shell)
  client. It is compatible with both the SSH-1 and SSH-2 protocols.


pkgId: 7a3f2009cb1baf1e585346eeb8bd305d237c277eb87e86fb676b7b5cda26fcaf
name: perl-Net-SSH2
arch: armv5tel
version: 0.45
epoch: 0
release: 4.el6
summary: Support for the SSH 2 protocol via libSSH2
url: http://search.cpan.org/dist/Net-SSH2/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Net-SSH2-0.45-4.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-SSH2-0.45-4.el6.armv5tel.rpm
checksum_type: sha256
description:
  Net::SSH2 is a perl interface to the libssh2 (http://www.libssh2.org)
  library. It supports the SSH2 protocol (there is no support for SSH1) with
  all of the key exchanges, ciphers, and compression of libssh2.


pkgId: 95a87026fa241828e28430f2483d23f46e1fc38b3fe5226abe7462d5901eead2
name: perl-Net-SSLGlue
arch: noarch
version: 0.8
epoch: 0
release: 1.el6
summary: Add/extend SSL support for common perl modules
url: http://search.cpan.org/dist/Net-SSLGlue/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp13_alw002
rpm_sourcerpm: perl-Net-SSLGlue-0.8-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-SSLGlue-0.8-1.el6.noarch.rpm
checksum_type: sha256
description:
  Some commonly used perl modules don't have SSL support at all, even if the
  protocol would support it. Others have SSL support, but most of them don't
  do proper checking of the servers certificate.

  The Net::SSLGlue::* modules try to add SSL support or proper certificate to
  these modules. Currently is support for the following modules available:

  - Net::SMTP - add SSL from beginning or using STARTTLS
  - Net::LDAP - add proper certificate checking
  - LWP - add proper certificate checking


pkgId: 61f276fe8714868d592d302251b3850fe0be4493e5f9462c67b8aee13d545fac
name: perl-Net-SSLeay
arch: armv5tel
version: 1.35
epoch: 0
release: 10.el6
summary: Perl extension for using OpenSSL
url: http://search.cpan.org/dist/Net-SSLeay/
rpm_license: OpenSSL
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-Net-SSLeay-1.35-10.el6.src.rpm
location_href: perl-Net-SSLeay-1.35-10.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module offers some high level convenience functions for accessing
  web pages on SSL servers (for symmetry, same API is offered for
  accessing http servers, too), a sslcat() function for writing your own
  clients, and finally access to the SSL api of SSLeay/OpenSSL package
  so you can write servers or clients for more complicated applications.


pkgId: ddc64af68aa846ca66be59b1c736f4d7c415b81d963701b5e9d507b42e8df2e6
name: perl-Net-STOMP-Client
arch: noarch
version: 2.3
epoch: 0
release: 1.el6
summary: STOMP object oriented client module
url: http://search.cpan.org/dist/Net-STOMP-Client/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-STOMP-Client-2.3-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-STOMP-Client-2.3-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides an object oriented client interface to interact with
  servers supporting STOMP (Streaming Text Orientated Messaging Protocol). It
  supports the major features of messaging brokers: SSL, asynchronous I/O,
  receipts and transactions.


pkgId: 8bcce96c6066d76a0d3bb756f9f54b5c41b558455040c0aa242d4dc5505bb16e
name: perl-Net-Server
arch: noarch
version: 2.007
epoch: 0
release: 2.el6
summary: Extensible, general Perl server engine
url: http://search.cpan.org/dist/Net-Server/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-Server-2.007-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Server-2.007-2.el6.noarch.rpm
checksum_type: sha256
description:
  An extensible, class oriented module written in perl and intended to
  be the back end layer of internet protocol servers.


pkgId: ab4020c4fd26dee24b62e40752c0f6fc74acb2a93d95ff5d585df85b026fea09
name: perl-Net-Server-Coro
arch: noarch
version: 1.2
epoch: 0
release: 2.el6
summary: Co-operative multithreaded server using Coro
url: http://search.cpan.org/dist/Net-Server-Coro/
rpm_license: MIT
rpm_vendor: Koji
rpm_group: Unspecified
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-Net-Server-Coro-1.2-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Server-Coro-1.2-2.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Server::Coro implements multithreaded server for the Net::Server
  architecture, using Coro and Coro::Socket to make all reads and writes non-
  blocking. Additionally, it supports non-blocking SSL negotiation.


pkgId: fd30b8ddfe716bf8ac8ce80331cbb2c372a8ed22688d8f1e7a919e0e0033d9a7
name: perl-Net-Statsd
arch: noarch
version: 0.09
epoch: 0
release: 1.el6
summary: Sends statistics to the stats daemon over UDP
url: http://search.cpan.org/dist/Net-Statsd/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-Statsd-0.09-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Statsd-0.09-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements a client for a statsd statistics collection server, such
  as the one in use at Etsy.com.

  You want to use this module to track statistics in your Perl application, such
  as how many times a certain event occurs (user logins in a web application, or
  database queries issued), or you want to time and then graph how long certain
  events take, like database queries execution time or time to download a certain
  file, etc...


pkgId: 259d74406726fdd3ee3103f1a369f24c5908dc32493aca1367aa7f4e0b24aa4c
name: perl-Net-Stomp
arch: noarch
version: 0.36
epoch: 0
release: 1.el6
summary: Stomp client module for Perl
url: http://search.cpan.org/dist/Net-Stomp/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Net-Stomp-0.36-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Stomp-0.36-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module allows you to write a Stomp client. Stomp, the Streaming Text
  Orientated Messaging Protocol, is a simple and easy to implement protocol
  for working with Message Orientated Middleware.

  Net::Stomp can be used to communicate with Apache ActiveMQ, an
  enterprise-level Java Message Service 1.1 (JMS) message broker.


pkgId: 216cb97ce8e983695a11c9220909b6cf959f91de7ecf2e40e7bfa9f9241d9b34
name: perl-Net-Telnet
arch: noarch
version: 3.03
epoch: 0
release: 11.el6
summary: Net-Telnet Perl module
url: http://search.cpan.org/dist/Net-Telnet/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Net-Telnet-3.03-11.el6.src.rpm
location_href: perl-Net-Telnet-3.03-11.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Telnet allows you to make client connections to a TCP port and do
  network I/O, especially to a port using the TELNET protocol. Simple I/O
  methods such as print, get, and getline are provided. More sophisticated
  interactive features are provided because connecting to a TELNET port
  ultimately means communicating with a program designed for human interaction.
  These interactive features include the ability to specify a time-out and to
  wait for patterns to appear in the input stream, such as the prompt from a
  shell.


pkgId: 24990a6bc47271c7c7b7148aef0fcc89ddd93ffcbb85ca34c9d6f52343919b88
name: perl-Net-Whois
arch: noarch
version: 1.9
epoch: 0
release: 2.el6
summary: Get and parse "whois" domain data from InterNIC
url: http://search.cpan.org/dist/Net-Whois/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Net-Whois-1.9-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Net-Whois-1.9-2.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Whois::Domain new() attempts to retrieve and parse the given
  domain's "whois" information from the InterNIC (whois.internic.net). If
  the server could not be contacted, is too busy, or otherwise does not
  process the query then the constructor does not return a reference and
  your object is undefined. If the constructor returns a reference, that
  reference can be used to access the various attributes of the domains'
  whois entry assuming that there was a match. The member function ok
  returns 1 if a match 0 if no match.


pkgId: 8cce1ecdec6dc3917d35ddca6c854cbdcf4ceb78384478d078a9ece6e3fbf411
name: perl-Net-Whois-IP
arch: noarch
version: 1.18
epoch: 0
release: 1.el6
summary: Perl extension for looking up the whois information for ip addresses
url: http://search.cpan.org/dist/Net-Whois-IP/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Unspecified
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Net-Whois-IP-1.18-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Whois-IP-1.18-1.el6.noarch.rpm
checksum_type: sha256
description:
  Perl module to allow whois lookup of ip addresses. This module should
  recursively query the various whois providers until it gets the more
  detailed information including either TechPhone or OrgTechPhone by default;
  however, this is overrideable.


pkgId: ad65bfb7f71ab0e7b8980996805583de9032056c65989bb68524c1fc26c6318b
name: perl-Net-Whois-Raw
arch: noarch
version: 2.82
epoch: 0
release: 1.el6
summary: Get Whois information for domains
url: http://search.cpan.org/dist/Net-Whois-Raw/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-Net-Whois-Raw-2.82-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Net-Whois-Raw-2.82-1.el6.noarch.rpm
checksum_type: sha256
description:
  Net::Whois::Raw queries WHOIS servers about domains. The module supports
  recursive WHOIS queries. Also queries via HTTP is supported for some TLDs.


pkgId: 2ce1c6f3e4b7e1096b0fdb8f652423b5c91de6dc6792a3319d0b28a5e89e1e51
name: perl-Net-XMPP
arch: noarch
version: 1.02
epoch: 0
release: 8.el6
summary: Net::XMPP - perl XMPP library
url: http://search.cpan.org/dist/Net-XMPP/
rpm_license: (GPL+ or Artistic) or LGPLv2+
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Net-XMPP-1.02-8.el6.src.rpm
location_href: perl-Net-XMPP-1.02-8.el6.noarch.rpm
checksum_type: sha256
description:
  Net::XMPP provides a Perl user with access to the Extensible
  Messaging and Presence Protocol (XMPP).

  For more information about XMPP visit:

       http://www.xmpp.org


pkgId: 4bfe8dcbe5c050cc624d2eb641fd13c870f212ebd398b663c936bc0a8a6595f0
name: perl-NetAddr-IP
arch: armv5tel
version: 4.027
epoch: 0
release: 7.el6
summary: Manages IPv4 and IPv6 addresses and subnets
url: http://search.cpan.org/dist/NetAddr-IP/
rpm_license: Artistic 2.0
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-NetAddr-IP-4.027-7.el6.src.rpm
location_href: perl-NetAddr-IP-4.027-7.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides an object-oriented abstraction on top of IP addresses
  or IP subnets, that allows for easy manipulations. Version 4.xx of
  NetAdder::IP will will work older versions of Perl and does not use
  Math::BigInt as in previous versions.


pkgId: 16af6e664a0d4b4dc62dcd78e355dead14d85a9d06ccfcff8dd67b1f57962a8f
name: perl-NetPacket
arch: noarch
version: 1.3.0
epoch: 0
release: 1.el6
summary: Assemble/disassemble network packets at the protocol level
url: http://search.cpan.org/dist/NetPacket/
rpm_license: Artistic 2.0
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp12_alw002
rpm_sourcerpm: perl-NetPacket-1.3.0-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-NetPacket-1.3.0-1.el6.noarch.rpm
checksum_type: sha256
description:
  NetPacket provides a base class for a cluster of modules related to
  decoding and encoding of network protocols. Each NetPacket descendant
  module knows how to encode and decode packets for the network protocol it
  implements. Consult the documentation for the module in question for protocol-
  specific implementation.


pkgId: 85ccce278fca9f4a4c8ba40578d637e81a61447297af2baec1d560851a9034dd
name: perl-NetPacket-LLC
arch: noarch
version: 0.01
epoch: 0
release: 2.el6
summary: Assemble and disassemble IEEE 802.3 LLC protocol packets
url: http://search.cpan.org/dist/NetPacket-LLC/
rpm_license: Artistic clarified
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-NetPacket-LLC-0.01-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-NetPacket-LLC-0.01-2.el6.noarch.rpm
checksum_type: sha256
description:
  NetPacket::LLC provides a set of routines for assembling and disassembling
  packets using the IEEE standard LLC protocol layer.


pkgId: e2bf4f76990336f066b8f548da311eb45cb32c7b0eb16327c9948944b9178059
name: perl-NetPacket-SpanningTree
arch: noarch
version: 0.01
epoch: 0
release: 3.el6
summary: Assemble and disassemble IEEE 802.1D Spanning Tree protocol packets
url: http://search.cpan.org/dist/NetPacket-SpanningTree/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-NetPacket-SpanningTree-0.01-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-NetPacket-SpanningTree-0.01-3.el6.noarch.rpm
checksum_type: sha256
description:
  NetPacket::SpanningTree provides a set of routines for assembling and
  disassembling packets using the IEEE standard Spanning Tree Protocol.
  Spanning Tree is a layer 2 protocol defined by the IEEE 802.1D
  specification.


pkgId: 5c0bf5850276a95efadc4821efc388f4dc464f41b1a96cfe40aa47a448a70de3
name: perl-Newt
arch: armv5tel
version: 1.08
epoch: 0
release: 26.el6
summary: Perl bindings for the Newt library
url: http://search.cpan.org/~amedina/Newt-1.08/
rpm_license: GPL+ or Artistic
rpm_group: System Environment/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Newt-1.08-26.el6.src.rpm
location_href: perl-Newt-1.08-26.el6.armv5tel.rpm
checksum_type: sha256
description:
  This package provides Perl bindings for the Newt widget
  library, which provides a color text mode user interface.


pkgId: 10b112a82bab25692959e1d0b8a19e59e917bf3116e84aeae06d4a762d2dde79
name: perl-Nmap-Parser
arch: noarch
version: 1.19
epoch: 0
release: 4.el6
summary: Parse nmap scan data with perl
url: http://search.cpan.org/dist/Nmap-Parser/
rpm_license: MIT
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-Nmap-Parser-1.19-4.el6.src.rpm
rpm_packager: Koji
location_href: perl-Nmap-Parser-1.19-4.el6.noarch.rpm
checksum_type: sha256
description:
  This module implements a interface to the information contained in an
  nmap scan. It is implemented by parsing the xml scan data that is
  generated by nmap. This will enable anyone who utilizes nmap to quickly
  create fast and robust security scripts that utilize the powerful port
  scanning abilities of nmap.


pkgId: 2c91f9fde41709fbd97f6c926fd652c637ca1f20a180682f62c1e2a35ebaa1be
name: perl-No-Worries
arch: noarch
version: 0.7
epoch: 0
release: 1.el6
summary: Perl coding without worries
url: http://search.cpan.org/dist/No-Worries/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_alw002
rpm_sourcerpm: perl-No-Worries-0.7-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-No-Worries-0.7-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module and its sub-modules ease coding by providing consistent
  convenient functions to perform frequently used programming tasks.


pkgId: aaf2d54fe6bc707c5837c47f5ab24c02e127e7b374b2d529493834e653272034
name: perl-No-Worries
arch: noarch
version: 1.5
epoch: 0
release: 1.el6
summary: Perl coding without worries
url: http://search.cpan.org/dist/No-Worries/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-No-Worries-1.5-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-No-Worries-1.5-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module and its sub-modules ease coding by providing consistent convenient
  functions to perform frequently used programming tasks.


pkgId: 59f0f942976e7225034faa5b28aaf7aa0a1ed440794984d7b7a405736a20a0b7
name: perl-Number-Bytes-Human
arch: noarch
version: 0.07
epoch: 0
release: 12.el6
summary: Convert byte count to human readable format
url: http://search.cpan.org/dist/Number-Bytes-Human/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Number-Bytes-Human-0.07-12.el6.src.rpm
rpm_packager: Koji
location_href: perl-Number-Bytes-Human-0.07-12.el6.noarch.rpm
checksum_type: sha256
description:
  This module is designed to format byte counts to usual readable
  format, like '2.0K', '3.1G', '100B'. It was inspired in the -h option of
  Unix utilities like du, df and ls for "human-readable" output.


pkgId: a5dc7f6a88be8b938328a35f9c36e47f1148fc7a637975387782669cbe4aaf09
name: perl-Number-Compare
arch: noarch
version: 0.01
epoch: 0
release: 13.el6
summary: Perl module for numeric comparisons
url: http://search.cpan.org/dist/Number-Compare/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Number-Compare-0.01-13.el6.src.rpm
location_href: perl-Number-Compare-0.01-13.el6.noarch.rpm
checksum_type: sha256
description:
  Number::Compare compiles a simple comparison to an anonymous subroutine,
  which you can call with a value to be tested again.


pkgId: ffdba57c3c34078c2086e66a05679aef195ff0c3478049aa69bbb4dd212da132
name: perl-Number-Format
arch: noarch
version: 1.73
epoch: 0
release: 3.el6
summary: Perl extension for formatting numbers
url: http://search.cpan.org/dist/Number-Format/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Number-Format-1.73-3.el6.src.rpm
rpm_packager: Koji
location_href: perl-Number-Format-1.73-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module provides an easy means of formatting numbers in a manner
  suitable for displaying to the user.


pkgId: 43903decdf6ae03d1be6a009dcc8bded9ae4d4d864489f3b67ed2b0de43d71bb
name: perl-Object-Accessor
arch: armv5tel
version: 0.34
epoch: 1
release: 141.el6.1
summary: Perl module that allows per object accessors
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Object-Accessor-0.34-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Object::Accessor provides an interface to create per object accessors
  (as opposed to per Class accessors, as, for example, Class::Accessor
  provides).


pkgId: d2a288755c0c4a2480c5c345431242e05a8b3a64c38a8db2d5bccb68bbccb7d6
name: perl-Object-Deadly
arch: noarch
version: 0.09
epoch: 0
release: 6.el6
summary: Perl module providing an object that dies whenever examined
url: http://search.cpan.org/dist/Object-Deadly/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Object-Deadly-0.09-6.el6.src.rpm
location_href: perl-Object-Deadly-0.09-6.el6.noarch.rpm
checksum_type: sha256
description:
  Object::Deadly is meant to be used in testing. All possible
  overloading and method calls die. You can pass this object into
  methods which are not supposed to accidentally trigger any potentially
  overloading.


pkgId: 1c191f2f58370eb1917776fb0a6e846b8e437892cffa7d623f20552c6e6ce7d9
name: perl-Object-MultiType
arch: noarch
version: 0.05
epoch: 0
release: 3.el6
summary: Perl Objects as Hash, Array, Scalar, Code and Glob at the same time
url: http://search.cpan.org/dist/Object-MultiType/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-Object-MultiType-0.05-3.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Object-MultiType-0.05-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module return an object that works like a Hash, Array, Scalar, Code
  and Glob object at the same time.


pkgId: 80685e1ff0407caaa7cdff16d389c9c1cfbc7828676d38ab72d3328628762881
name: perl-Object-Pluggable
arch: noarch
version: 1.29
epoch: 0
release: 7.el6
summary: Base class for creating plugin-enabled objects
url: http://search.cpan.org/dist/Object-Pluggable/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Object-Pluggable-1.29-7.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Object-Pluggable-1.29-7.el6.noarch.rpm
checksum_type: sha256
description:
  Object::Pluggable is a base class for creating plug-in enabled objects. It
  is a generic port of POE::Component::IRC's plugin system.


pkgId: 0485a2ac78427f8c57354365e9272a42e98cabe0b2d00e81548ff8a7c3ed0f33
name: perl-Object-Realize-Later
arch: noarch
version: 0.18
epoch: 0
release: 6.el6
summary: Delayed creation of objects
url: http://search.cpan.org/dist/Object-Realize-Later/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Object-Realize-Later-0.18-6.el6.src.rpm
rpm_packager: Koji
location_href: perl-Object-Realize-Later-0.18-6.el6.noarch.rpm
checksum_type: sha256
description:
  This module helps you implementing delay loading of object-data.  While
  creating a stub-object, Object::Realize::Later simulates you got the
  real data.


pkgId: e05ea3087c825a545553a9ca4e3472638ab428921c7e8cfb7c87221f0591a2c3
name: perl-Object-Signature
arch: noarch
version: 1.05
epoch: 0
release: 11.el6
summary: Cryptographically strong objects
url: http://search.cpan.org/dist/Object-Signature/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Object-Signature-1.05-11.el6.src.rpm
rpm_packager: Koji
location_href: perl-Object-Signature-1.05-11.el6.noarch.rpm
checksum_type: sha256
description:
  Object::Signature is an abstract base class that you can inherit from in
  order to allow your objects to generate unique cryptographic signatures.


pkgId: 582854c50c5f15d20aa608b39129bdb33150cccc9c8d56c53d0025a20e8e7891
name: perl-OpenGL
arch: armv5tel
version: 0.62
epoch: 0
release: 1.el6
summary: Perl OpenGL bindings
url: http://search.cpan.org/dist/OpenGL/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-OpenGL-0.62-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-OpenGL-0.62-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  Perl bindings to implementations of OpenGL and GLUT, providing virtually all
  of the OpenGL 1.0, and 1.1 functions, and most of 1.2.


pkgId: 6018eeb4b5a1f782ea90a9a6837274798b6ae08fad90bd3e12b8bac447d1129c
name: perl-PAR-Dist
arch: noarch
version: 0.46
epoch: 0
release: 2.el6
summary: Toolkit for creating and manipulating Perl PAR distributions
url: http://search.cpan.org/dist/PAR-Dist/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-PAR-Dist-0.46-2.el6.src.rpm
location_href: perl-PAR-Dist-0.46-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module creates and manipulates PAR distributions. They are architecture-
  specific PAR files, containing everything under blib/ of CPAN distributions
  after their make or Build stage, a META.yml describing metadata of the
  original CPAN distribution, and a MANIFEST detailing all files within it.
  Digitally signed PAR distributions will also contain a SIGNATURE file.


pkgId: 7e37adeeb2c3a965baba93e8cc8003136a44d450e9c1083b6d558dac3d9c2a47
name: perl-PCP-LogImport
arch: armv5tel
version: 3.10.9
epoch: 0
release: 9.el6
summary: Performance Co-Pilot (PCP) Perl bindings for importing external data into PCP archives
url: http://www.pcp.io
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: pcp-3.10.9-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-PCP-LogImport-3.10.9-9.el6.armv5tel.rpm
checksum_type: sha256
description:
  The PCP::LogImport module contains the Perl language bindings for
  importing data in various 3rd party formats into PCP archives so
  they can be replayed with standard PCP monitoring tools.


pkgId: 9c46ac0ac7dee5fd86edfca0b1783aa29598e05f854a758cd57af8723166a6c1
name: perl-PCP-LogSummary
arch: armv5tel
version: 3.10.9
epoch: 0
release: 9.el6
summary: Performance Co-Pilot (PCP) Perl bindings for post-processing output of pmlogsummary
url: http://www.pcp.io
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: pcp-3.10.9-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-PCP-LogSummary-3.10.9-9.el6.armv5tel.rpm
checksum_type: sha256
description:
  The PCP::LogSummary module provides a Perl module for using the
  statistical summary data produced by the Performance Co-Pilot
  pmlogsummary utility.  This utility produces various averages,
  minima, maxima, and other calculations based on the performance
  data stored in a PCP archive.  The Perl interface is ideal for
  exporting this data into third-party tools (e.g. spreadsheets).


pkgId: 6e02b74ed58f154beac86b7fc4a1384f1a748cab5204f4cee3d0fdf9d44cbadc
name: perl-PCP-MMV
arch: armv5tel
version: 3.10.9
epoch: 0
release: 9.el6
summary: Performance Co-Pilot (PCP) Perl bindings for PCP Memory Mapped Values
url: http://www.pcp.io
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: pcp-3.10.9-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-PCP-MMV-3.10.9-9.el6.armv5tel.rpm
checksum_type: sha256
description:
  The PCP::MMV module contains the Perl language bindings for
  building scripts instrumented with the Performance Co-Pilot
  (PCP) Memory Mapped Value (MMV) mechanism.
  This mechanism allows arbitrary values to be exported from an
  instrumented script into the PCP infrastructure for monitoring
  and analysis with pmchart, pmie, pmlogger and other PCP tools.


pkgId: f176f2adfec5d3a7426897187ee53c5ddcbc32625a0fe7f9db5a63eb3a17b72e
name: perl-PCP-PMDA
arch: armv5tel
version: 3.10.9
epoch: 0
release: 9.el6
summary: Performance Co-Pilot (PCP) Perl bindings and documentation
url: http://www.pcp.io
rpm_license: GPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: pcp-3.10.9-9.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-PCP-PMDA-3.10.9-9.el6.armv5tel.rpm
checksum_type: sha256
description:
  The PCP::PMDA Perl module contains the language bindings for
  building Performance Metric Domain Agents (PMDAs) using Perl.
  Each PMDA exports performance data for one specific domain, for
  example the operating system kernel, Cisco routers, a database,
  an application, etc.


pkgId: a182a06e41a5701be00563f362d9e6a53f25fa7ac0df7a1f08b0e77f445ee4e5
name: perl-PDF-API2
arch: noarch
version: 2.019
epoch: 0
release: 2.el6
summary: Perl module for creation and modification of PDF files
url: http://search.cpan.org/dist/PDF-API2/
rpm_license: LGPLv2+
rpm_vendor: Koji
rpm_group: System Environment/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-PDF-API2-2.019-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-PDF-API2-2.019-2.el6.noarch.rpm
checksum_type: sha256
description:
  A Perl Module Chain to facilitate the Creation and Modification of High-Quality
  "Portable Document Format (aka. PDF)" Files.


pkgId: d24b136864aa3a0e4599e41813ab837317894ebe2557c37cc1e3208b0978751e
name: perl-PDF-Reuse
arch: noarch
version: 0.35
epoch: 0
release: 3.el6
summary: Reuse and mass produce PDF documents
url: http://search.cpan.org/dist/PDF-Reuse
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-PDF-Reuse-0.35-3.el6.src.rpm
location_href: perl-PDF-Reuse-0.35-3.el6.noarch.rpm
checksum_type: sha256
description:
  This module allows you to reuse PDF-files. You can use pages, images,
  fonts and Acrobat JavaScript from old PDF-files (if they were not
  encrypted), and rearrange the components, and add new graphics, texts etc.

  There is also support for graphics. In the tutorial there is a description of
  how to transform simple PDF-pages to graphic Perl objects with the help of
  programs based on this module.

  The module is fairly fast, so it should be possible to use it for mass
  production.


pkgId: 4ab2f4bd4b1ce2b280c8c8d4ed6f34deb8bcb699c6ad17db1c4bb146b04f34a3
name: perl-PDL
arch: armv5tel
version: 2.4.7
epoch: 0
release: 1.el6.1
summary: The Perl Data Language
url: http://pdl.perl.org/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: duplo
rpm_sourcerpm: perl-PDL-2.4.7-1.el6.1.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-PDL-2.4.7-1.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  PDL ("Perl Data Language") gives standard Perl the ability to
  compactly store and speedily manipulate the large N-dimensional data
  arrays which are the bread and butter of scientific computing.  PDL
  turns perl into a free, array-oriented, numerical language similar to
  such commercial packages as IDL and MatLab.


pkgId: 3175f33a5fe5a32da0e313c7d8a1720db5445762987780161e6c19f9c50a12ba
name: perl-PHP-Serialization
arch: noarch
version: 0.34
epoch: 0
release: 16.el6
summary: Converts between PHP's serialize() output and the equivalent Perl structure
url: http://search.cpan.org/dist/PHP-Serialization/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-PHP-Serialization-0.34-16.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-PHP-Serialization-0.34-16.el6.noarch.rpm
checksum_type: sha256
description:
  Provides a simple, quick means of serializing perl memory structures
  (including object data!) into a format that PHP can deserialize() and
  access, and vice versa.


pkgId: dbf07f70e3fe910c1bec7907b971b4ce60ee6bf36b6738a90a30888c2f7dc6ea
name: perl-POE
arch: noarch
version: 1.354
epoch: 0
release: 1.el6
summary: POE - portable multitasking and networking framework for Perl
url: http://search.cpan.org/dist/POE/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-POE-1.354-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-POE-1.354-1.el6.noarch.rpm
checksum_type: sha256
description:
  POE is a framework for cooperative, event driven multitasking in Perl.
  Other languages have similar frameworks. Python has Twisted. TCL has "the
  event loop".

  POE originally was developed as the core of a persistent object server and
  runtime environment. It has evolved into a general purpose multitasking
  and networking framework, encompassing and providing a consistent interface
  to other event loops such as Event and the Tk and Gtk toolkits.

  POE is written in layers, each building upon the previous. It's therefore
  possible to use POE at varying levels of abstraction.


pkgId: 802a29618da97bdb964aac4a95d9316fa6d292ed8d8c773e742b3c75cfe64115
name: perl-POE-Component-Client-DNS
arch: noarch
version: 1.051
epoch: 0
release: 1.el6
summary: Non-blocking/concurrent DNS queries using Net::DNS and POE
url: http://search.cpan.org/dist/POE-Component-Client-DNS
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-POE-Component-Client-DNS-1.051-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-POE-Component-Client-DNS-1.051-1.el6.noarch.rpm
checksum_type: sha256
description:
  POE::Component::Client::DNS provides a facility for non-blocking, concurrent
  DNS requests. Using POE, it allows other tasks to run while waiting for name
  servers to respond.


pkgId: e3abdca505a140692fa11d5b7a7a7a5f2d2931fe647ec9353cc8ef9e981c3668
name: perl-POE-Component-Client-Ping
arch: noarch
version: 1.171
epoch: 0
release: 2.el6
summary: Non-blocking ICMP ping client
url: http://search.cpan.org/dist/POE-Component-Client-Ping/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-POE-Component-Client-Ping-1.171-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-POE-Component-Client-Ping-1.171-2.el6.noarch.rpm
checksum_type: sha256
description:
  POE::Component::Client::Ping is non-blocking ICMP ping client. It lets
  several other sessions ping through it in parallel, and it lets them
  continue doing other things while they wait for responses.


pkgId: e586b4d7d5a5a1282ff6d14a5dabeea776adb06b113d82de969f2bed0095f968
name: perl-POE-Component-Syndicator
arch: noarch
version: 0.06
epoch: 0
release: 5.el6
summary: POE component base class which implements the Observer pattern
url: http://search.cpan.org/dist/POE-Component-Syndicator/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-POE-Component-Syndicator-0.06-5.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-POE-Component-Syndicator-0.06-5.el6.noarch.rpm
checksum_type: sha256
description:
  POE::Component::Syndicator is a base class for POE components which need to
  handle a persistent resource (e.g. a connection to an IRC server) for one
  or more sessions in an extendable way.


pkgId: b48d7535761dd7fee79789970e081c123d96aac741789ec8211382f348d159d7
name: perl-POE-Filter-Zlib
arch: noarch
version: 2.02
epoch: 0
release: 11.el6
summary: POE filter wrapped around Compress::Zlib
url: http://search.cpan.org/dist/POE-Filter-Zlib/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-POE-Filter-Zlib-2.02-11.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-POE-Filter-Zlib-2.02-11.el6.noarch.rpm
checksum_type: sha256
description:
  POE::Filter::Zlib provides a POE filter for performing compression and
  uncompression using Compress::Zlib. It is suitable for use with
  POE::Filter::Stackable.


pkgId: 9123b0bb255fcb9b1f798a9c49b404287d3ab4496e1394fc9f7b732b28d89975
name: perl-POE-Test-Loops
arch: noarch
version: 1.035
epoch: 0
release: 1.el6
summary: Reusable tests for POE::Loop authors
url: http://search.cpan.org/dist/POE-Test-Loops
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: mindstorm.saltbaek.local
rpm_sourcerpm: perl-POE-Test-Loops-1.035-1.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-POE-Test-Loops-1.035-1.el6.noarch.rpm
checksum_type: sha256
description:
  POE::Test::Loops contains one function, generate(), which will generate
  all the loop tests for one or more POE::Loop subclasses. The SYNOPSIS
  example is a version of poe-gen-tests, which is a stand-alone utility
  to generate the actual tests. The poe-gen-tests manpage also documents
  the POE::Test::Loops system in more detail.


pkgId: 01ffc609b98ef52d197b861379169a90c6db27366d724920cd41abd4f30dcc2d
name: perl-Package-Constants
arch: armv5tel
version: 0.02
epoch: 1
release: 141.el6.1
summary: List all constants declared in a package
url: http://www.perl.org/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-5.10.1-141.el6.1.src.rpm
location_href: perl-Package-Constants-0.02-141.el6.1.armv5tel.rpm
checksum_type: sha256
description:
  Package::Constants lists all the constants defined in a certain package.
  This can be useful for, among others, setting up an autogenerated
  @EXPORT/@EXPORT_OK for a Constants.pm file.


pkgId: 060d33260c3c906c2b72ab32e98d73fef21b1a25861e04f6216d0943b5db95cc
name: perl-Package-Generator
arch: noarch
version: 0.103
epoch: 0
release: 2.el6
summary: Generate new packages quickly and easily
url: http://search.cpan.org/dist/Package-Generator/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Package-Generator-0.103-2.el6.src.rpm
location_href: perl-Package-Generator-0.103-2.el6.noarch.rpm
checksum_type: sha256
description:
  This module lets you quickly and easily construct new packages. It gives
  them unused names and sets up their package data, if provided.


pkgId: 9146f3427e945f70e9bf1a4b2a0c68b80091ec4b592054daa844afc7bfa4819c
name: perl-PadWalker
arch: armv5tel
version: 1.9
epoch: 0
release: 1.el6
summary: Play with other peoples' lexical variables
url: http://search.cpan.org/dist/PadWalker/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp15_alw002
rpm_sourcerpm: perl-PadWalker-1.9-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-PadWalker-1.9-1.el6.armv5tel.rpm
checksum_type: sha256
description:
  PadWalker is a module which allows you to inspect (and even change!)
  lexical variables in any subroutine which called you. It will only show
  those variables which are in scope at the point of the call.


pkgId: 029550954f6aec10ae59f354c2cf4cae98ffc2ac5e2c2391cf49cf1ecd314e1b
name: perl-Pango
arch: armv5tel
version: 1.221
epoch: 0
release: 2.el6
summary: Perl interface to the pango library
url: http://search.cpan.org/dist/Pango/
rpm_license: LGPLv2+
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: lego
rpm_sourcerpm: perl-Pango-1.221-2.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Pango-1.221-2.el6.armv5tel.rpm
checksum_type: sha256
description:
  perl-Pango provides Perl bindings for the text layout/rendering library
  pango. Pango is a library for laying out and rendering text, with an
  emphasis on internationalization. Pango can be used anywhere that text layout
  is needed, but using Pango in conjunction with Cairo and/or Gtk2 provides a
  complete solution with high quality text handling and graphics rendering.


pkgId: 13364c06471b71fc25a048058af4d75c78da1f09c9b58cfdf90ab72afb292c17
name: perl-Parallel-ForkManager
arch: noarch
version: 0.7.9
epoch: 0
release: 1.el6
summary: Simple parallel processing fork manager
url: http://search.cpan.org/dist/Parallel-ForkManager/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Parallel-ForkManager-0.7.9-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Parallel-ForkManager-0.7.9-1.el6.noarch.rpm
checksum_type: sha256
description:
  This module is intended for use in operations that can be done in parallel
  where the number of processes to be forked off should be limited. Typical
  use is a downloader which will be retrieving hundreds/thousands of files.


pkgId: c5edaf1494107d5546c20ef7f1d7d1a363b2a253ad3413374ee1479b16955a72
name: perl-Params-Classify
arch: armv5tel
version: 0.013
epoch: 0
release: 5.el6
summary: Argument type classification
url: http://search.cpan.org/dist/Params-Classify/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp4_alw002
rpm_sourcerpm: perl-Params-Classify-0.013-5.el6.src.rpm
rpm_packager: Koji
location_href: perl-Params-Classify-0.013-5.el6.armv5tel.rpm
checksum_type: sha256
description:
  This module provides various type-testing functions. These are intended
  for functions that, unlike most Perl code, care what type of data they
  are operating on. For example, some functions wish to behave
  differently depending on the type of their arguments (like overloaded
  functions in C++).


pkgId: d5c0d131c8cd44b5bad2232df86971750069c77faa49429ce2f8d237808a5608
name: perl-Params-Coerce
arch: noarch
version: 0.14
epoch: 0
release: 11.el6
summary: Allows your classes to do coercion of parameters
url: http://search.cpan.org/dist/Params-Coerce/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: raspberrypi
rpm_sourcerpm: perl-Params-Coerce-0.14-11.el6.src.rpm
rpm_packager: Koji
location_href: perl-Params-Coerce-0.14-11.el6.noarch.rpm
checksum_type: sha256
description:
  A big part of good API design is that we should be able to be flexible in
  the ways that we take parameters. Params::Coerce attempts to encourage this,
  by making it easier to take a variety of different arguments, while adding
  negligible additional complexity to your code.


pkgId: af7f76d20098bdce5bafe5e2884e697938118273cc1fb50773843d1cade05268
name: perl-Params-Util
arch: armv5tel
version: 1.00
epoch: 0
release: 3.el6
summary: Simple standalone param-checking functions
url: http://search.cpan.org/dist/Params-Util/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Params-Util-1.00-3.el6.src.rpm
location_href: perl-Params-Util-1.00-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  Params::Util provides a basic set of importable functions that
  makes checking parameters a hell of a lot easier.


pkgId: df8623920609d89f6228763f092fc058338137890ddc8e8afc860a6fa4d261b4
name: perl-Params-Validate
arch: armv5tel
version: 0.92
epoch: 0
release: 3.el6
summary: Params-Validate Perl module
url: http://search.cpan.org/dist/Params-Validate/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Params-Validate-0.92-3.el6.src.rpm
location_href: perl-Params-Validate-0.92-3.el6.armv5tel.rpm
checksum_type: sha256
description:
  The Params::Validate module allows you to validate method or function
  call parameters to an arbitrary level of specificity. At the simplest
  level, it is capable of validating the required parameters were given
  and that no unspecified additional parameters were passed in. It is
  also capable of determining that a parameter is of a specific type,
  that it is an object of a certain class hierarchy, that it possesses
  certain methods, or applying validation callbacks to arguments.


pkgId: 0042afaacdea98e72f2359f9b37d94510798ce3b8ef0afb9e754389028a54c00
name: perl-Parse-CPAN-Packages
arch: noarch
version: 2.33
epoch: 0
release: 8.el6
summary: Parse 02packages.details.txt.gz
url: http://search.cpan.org/dist/Parse-CPAN-Packages/
rpm_license: GPL+ or Artistic
rpm_vendor: Redsleeve
rpm_group: Development/Libraries
rpm_buildhost: odroidc1plus
rpm_sourcerpm: perl-Parse-CPAN-Packages-2.33-8.el6.src.rpm
rpm_packager: Redsleeve buildsystem
location_href: perl-Parse-CPAN-Packages-2.33-8.el6.noarch.rpm
checksum_type: sha256
description:
  The Comprehensive Perl Archive Network (CPAN) is a very useful collection
  of Perl code. It has several indices of the files that it hosts, including
  a file named "02packages.details.txt.gz" in the "modules" directory. This
  file contains lots of useful information and this module provides a simple
  interface to the data contained within.


pkgId: 12e83644a1aabe69fd5c3813b05f821645ca8b3e778a4d2212db1fcfa76bda02
name: perl-Parse-RecDescent
arch: noarch
version: 1.962.2
epoch: 0
release: 2.el6
summary: Parse-RecDescent Perl module
url: http://search.cpan.org/dist/Parse-RecDescent/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: odroid.ellekom.local
rpm_sourcerpm: perl-Parse-RecDescent-1.962.2-2.el6.src.rpm
location_href: perl-Parse-RecDescent-1.962.2-2.el6.noarch.rpm
checksum_type: sha256
description:
  Parse::RecDescent incrementally generates top-down recursive-descent
  text parsers from simple yacc-like grammar specifications. It
  provides:
      * Regular expressions or literal strings as terminals (tokens),
      * Multiple (non-contiguous) productions for any rule,
      * Repeated and optional subrules within productions,
      * Full access to Perl within actions specified as part of the
        grammar,
      * Simple automated error reporting during parser generation and
        parsing,
      * The ability to commit to, uncommit to, or reject particular
        productions during a parse,
      * The ability to pass data up and down the parse tree ("down" via
        subrule argument lists, "up" via subrule return values)
      * Incremental extension of the parsing grammar (even during a
        parse),
      * Precompilation of parser objects,

  User-definable reduce-reduce conflict resolution via "scoring" of
  matching productions.


pkgId: 2fe9b8cb0c489db36a919ef69952632757c3c4f8e5c69b890ab08a0124e99f98
name: perl-Parse-RecDescent
arch: noarch
version: 1.965
epoch: 0
release: 1.el6
summary: Generate Recursive-Descent Parsers
url: http://search.cpan.org/dist/Parse-RecDescent/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Parse-RecDescent-1.965-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Parse-RecDescent-1.965-1.el6.noarch.rpm
checksum_type: sha256
description:
  Parse::RecDescent incrementally generates top-down recursive-descent
  text parsers from simple yacc-like grammar specifications. It
  provides:
   * Regular expressions or literal strings as terminals (tokens)
   * Multiple (non-contiguous) productions for any rule
   * Repeated and optional subrules within productions
   * Full access to Perl within actions specified as part of the grammar
   * Simple automated error reporting during parser generation and parsing
   * The ability to commit to, uncommit to, or reject particular
     productions during a parse
   * The ability to pass data up and down the parse tree ("down" via
     subrule argument lists, "up" via subrule return values)
   * Incremental extension of the parsing grammar (even during a parse)
   * Precompilation of parser objects
   * User-definable reduce-reduce conflict resolution via "scoring" of
     matching productions


pkgId: 80102a1c99b5ff54fb6afd87c33de3a1f67930b95e4200949a7c07632f9b3e3e
name: perl-Parse-Yapp
arch: noarch
version: 1.05
epoch: 0
release: 41.el6
summary: Perl extension for generating and using LALR parsers
url: http://search.cpan.org/dist/Parse-Yapp/
rpm_license: GPL+ or Artistic
rpm_group: Development/Libraries
rpm_buildhost: sheeva.shatteredsilicon.net
rpm_sourcerpm: perl-Parse-Yapp-1.05-41.el6.src.rpm
location_href: perl-Parse-Yapp-1.05-41.el6.noarch.rpm
checksum_type: sha256
description:
  Parse::Yapp (Yet Another Perl Parser compiler) is a collection of
  modules that let you generate and use yacc like thread safe
  (reentrant) parsers with perl object oriented interface.  The script
  yapp is a front-end to the Parse::Yapp module and let you easily
  create a Perl OO parser from an input grammar file.


pkgId: d0648bc8a406756938f10e8df1a932101a6d480b56edf2aef20fdd1d4fcb0a42
name: perl-PatchReader
arch: noarch
version: 0.9.5
epoch: 0
release: 7.el6
summary: Utilities to read and manipulate patches and CVS
url: http://search.cpan.org/dist/PatchReader/
rpm_license: MPLv1.1
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp2_alw002
rpm_sourcerpm: perl-PatchReader-0.9.5-7.el6.src.rpm
rpm_packager: Koji
location_href: perl-PatchReader-0.9.5-7.el6.noarch.rpm
checksum_type: sha256
description:
  PatchReader is a set of utilities for reading in, transforming, and doing
  various other things with a patch.  It basically allows you to create a
  chain of readers that can read a patch, remove files from a patch, add
  CVS context, fix up the patch root according to CVS, and output the patch
  as raw unified or through a template processor (used in some places to
  output a patch as HTML).


pkgId: 6b7fea33e97b90345cc30612d1b68c50d13fa979bf4adfc0d4e6d37fa90e92d7
name: perl-Path-Class
arch: noarch
version: 0.25
epoch: 0
release: 1.el6
summary: Cross-platform path specification manipulation
url: http://search.cpan.org/dist/Path-Class/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp5_alw002
rpm_sourcerpm: perl-Path-Class-0.25-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Path-Class-0.25-1.el6.noarch.rpm
checksum_type: sha256
description:
  Path::Class is a module for manipulation of file and directory specifications
  (strings describing their locations, like '/home/ken/foo.txt' or
  'C:\Windows\Foo.txt') in a cross-platform manner. It supports pretty much every
  platform Perl runs on, including Unix, Windows, Mac, VMS, Epoc, Cygwin, OS/2,
  and NetWare.


pkgId: 1640277d21d276495b197048f7b3deef3638227dfadba2e647044e516fd259b3
name: perl-Pegex
arch: noarch
version: 0.11
epoch: 0
release: 1.el6
summary: Pegex Parser Generator
url: http://search.cpan.org/dist/Pegex/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp3_alw002
rpm_sourcerpm: perl-Pegex-0.11-1.el6.src.rpm
rpm_packager: Koji
location_href: perl-Pegex-0.11-1.el6.noarch.rpm
checksum_type: sha256
description:
  Pegex is a Acmeist parser framework. It is a PEG parser grammar syntax,
  combined with PCRE compatible regular expressions as the match tokens.
  Pegex draws heavily from Perl 6 rules, but works equivalently in many
  modern programming languages.


pkgId: 8b890811a5e299c753c3055c721ebdac72cf6bf5d50f1f8e6249f8d5a2878bde
name: perl-Perl-Critic
arch: noarch
version: 1.105
epoch: 0
release: 2.el6
summary: Critique Perl source code for best-practices
url: http://search.cpan.org/dist/Perl-Critic/
rpm_license: GPL+ or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: rasp1_home
rpm_sourcerpm: perl-Perl-Critic-1.105-2.el6.src.rpm
rpm_packager: Koji
location_href: perl-Perl-Critic-1.105-2.el6.noarch.rpm
checksum_type: sha256
description:
  Perl::Critic is an extensible framework for creating and applying coding
  standards to Perl source code. Essentially, it is a static source code
  analysis engine. Perl::Critic is distributed with a number of
  Perl::Critic::Policy modules that attempt to enforce various coding
  guidelines. Most Policy modules are based on Damian Conway's book Perl
  Best Practices. However, Perl::Critic is not limited to PBP and will
  even support Policies that contradict Conway. You can enable, disable,
  and customize those Polices through the Perl::Critic interface. You can
  also create new Policy modules that suit your own tastes.


