| Top |
| gint32 | gimp_drawable_transform_flip_simple () |
| gint32 | gimp_drawable_transform_flip () |
| gint32 | gimp_drawable_transform_flip_default () |
| gint32 | gimp_drawable_transform_perspective () |
| gint32 | gimp_drawable_transform_perspective_default () |
| gint32 | gimp_drawable_transform_rotate_simple () |
| gint32 | gimp_drawable_transform_rotate () |
| gint32 | gimp_drawable_transform_rotate_default () |
| gint32 | gimp_drawable_transform_scale () |
| gint32 | gimp_drawable_transform_scale_default () |
| gint32 | gimp_drawable_transform_shear () |
| gint32 | gimp_drawable_transform_shear_default () |
| gint32 | gimp_drawable_transform_2d () |
| gint32 | gimp_drawable_transform_2d_default () |
| gint32 | gimp_drawable_transform_matrix () |
| gint32 | gimp_drawable_transform_matrix_default () |
gint32 gimp_drawable_transform_flip_simple (gint32 drawable_ID,GimpOrientationType flip_type,gboolean auto_center,gdouble axis,gboolean clip_result);
gimp_drawable_transform_flip_simple is deprecated and should not be used in newly-written code.
Use gimp_item_transform_flip_simple() instead.
drawable_ID |
The affected drawable. |
|
flip_type |
Type of flip. |
|
auto_center |
Whether to automatically position the axis in the selection center. |
|
axis |
coord. of flip axis. |
|
clip_result |
Whether to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_flip (gint32 drawable_ID,gdouble x0,gdouble y0,gdouble x1,gdouble y1,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,gboolean clip_result);
gimp_drawable_transform_flip is deprecated and should not be used in newly-written code.
Use gimp_item_transform_flip() instead.
drawable_ID |
The affected drawable. |
|
x0 |
horz. coord. of one end of axis. |
|
y0 |
vert. coord. of one end of axis. |
|
x1 |
horz. coord. of other end of axis. |
|
y1 |
vert. coord. of other end of axis. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
Whether to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_flip_default (gint32 drawable_ID,gdouble x0,gdouble y0,gdouble x1,gdouble y1,gboolean interpolate,gboolean clip_result);
gimp_drawable_transform_flip_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_flip() instead.
drawable_ID |
The affected drawable. |
|
x0 |
horz. coord. of one end of axis. |
|
y0 |
vert. coord. of one end of axis. |
|
x1 |
horz. coord. of other end of axis. |
|
y1 |
vert. coord. of other end of axis. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
Whether to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_perspective (gint32 drawable_ID,gdouble x0,gdouble y0,gdouble x1,gdouble y1,gdouble x2,gdouble y2,gdouble x3,gdouble y3,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,GimpTransformResize clip_result);
gimp_drawable_transform_perspective is deprecated and should not be used in newly-written code.
Use gimp_item_transform_perspective() instead.
drawable_ID |
The affected drawable. |
|
x0 |
The new x coordinate of upper-left corner of original bounding box. |
|
y0 |
The new y coordinate of upper-left corner of original bounding box. |
|
x1 |
The new x coordinate of upper-right corner of original bounding box. |
|
y1 |
The new y coordinate of upper-right corner of original bounding box. |
|
x2 |
The new x coordinate of lower-left corner of original bounding box. |
|
y2 |
The new y coordinate of lower-left corner of original bounding box. |
|
x3 |
The new x coordinate of lower-right corner of original bounding box. |
|
y3 |
The new y coordinate of lower-right corner of original bounding box. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_perspective_default (gint32 drawable_ID,gdouble x0,gdouble y0,gdouble x1,gdouble y1,gdouble x2,gdouble y2,gdouble x3,gdouble y3,gboolean interpolate,GimpTransformResize clip_result);
gimp_drawable_transform_perspective_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_perspective() instead.
drawable_ID |
The affected drawable. |
|
x0 |
The new x coordinate of upper-left corner of original bounding box. |
|
y0 |
The new y coordinate of upper-left corner of original bounding box. |
|
x1 |
The new x coordinate of upper-right corner of original bounding box. |
|
y1 |
The new y coordinate of upper-right corner of original bounding box. |
|
x2 |
The new x coordinate of lower-left corner of original bounding box. |
|
y2 |
The new y coordinate of lower-left corner of original bounding box. |
|
x3 |
The new x coordinate of lower-right corner of original bounding box. |
|
y3 |
The new y coordinate of lower-right corner of original bounding box. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_rotate_simple (gint32 drawable_ID,GimpRotationType rotate_type,gboolean auto_center,gint center_x,gint center_y,gboolean clip_result);
gimp_drawable_transform_rotate_simple is deprecated and should not be used in newly-written code.
Use gimp_item_transform_rotate_simple() instead.
drawable_ID |
The affected drawable. |
|
rotate_type |
Type of rotation. |
|
auto_center |
Whether to automatically rotate around the selection center. |
|
center_x |
The hor. coordinate of the center of rotation. |
|
center_y |
The vert. coordinate of the center of rotation. |
|
clip_result |
Whether to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_rotate (gint32 drawable_ID,gdouble angle,gboolean auto_center,gint center_x,gint center_y,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,GimpTransformResize clip_result);
gimp_drawable_transform_rotate is deprecated and should not be used in newly-written code.
Use gimp_item_transform_rotate() instead.
drawable_ID |
The affected drawable. |
|
angle |
The angle of rotation (radians). |
|
auto_center |
Whether to automatically rotate around the selection center. |
|
center_x |
The hor. coordinate of the center of rotation. |
|
center_y |
The vert. coordinate of the center of rotation. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_rotate_default (gint32 drawable_ID,gdouble angle,gboolean auto_center,gint center_x,gint center_y,gboolean interpolate,GimpTransformResize clip_result);
gimp_drawable_transform_rotate_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_rotate() instead.
drawable_ID |
The affected drawable. |
|
angle |
The angle of rotation (radians). |
|
auto_center |
Whether to automatically rotate around the selection center. |
|
center_x |
The hor. coordinate of the center of rotation. |
|
center_y |
The vert. coordinate of the center of rotation. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_scale (gint32 drawable_ID,gdouble x0,gdouble y0,gdouble x1,gdouble y1,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,GimpTransformResize clip_result);
gimp_drawable_transform_scale is deprecated and should not be used in newly-written code.
Use gimp_item_transform_scale() instead.
drawable_ID |
The affected drawable. |
|
x0 |
The new x coordinate of the upper-left corner of the scaled region. |
|
y0 |
The new y coordinate of the upper-left corner of the scaled region. |
|
x1 |
The new x coordinate of the lower-right corner of the scaled region. |
|
y1 |
The new y coordinate of the lower-right corner of the scaled region. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_scale_default (gint32 drawable_ID,gdouble x0,gdouble y0,gdouble x1,gdouble y1,gboolean interpolate,GimpTransformResize clip_result);
gimp_drawable_transform_scale_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_scale() instead.
drawable_ID |
The affected drawable. |
|
x0 |
The new x coordinate of the upper-left corner of the scaled region. |
|
y0 |
The new y coordinate of the upper-left corner of the scaled region. |
|
x1 |
The new x coordinate of the lower-right corner of the scaled region. |
|
y1 |
The new y coordinate of the lower-right corner of the scaled region. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_shear (gint32 drawable_ID,GimpOrientationType shear_type,gdouble magnitude,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,GimpTransformResize clip_result);
gimp_drawable_transform_shear is deprecated and should not be used in newly-written code.
Use gimp_item_transform_shear() instead.
drawable_ID |
The affected drawable. |
|
shear_type |
Type of shear. |
|
magnitude |
The magnitude of the shear. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_shear_default (gint32 drawable_ID,GimpOrientationType shear_type,gdouble magnitude,gboolean interpolate,GimpTransformResize clip_result);
gimp_drawable_transform_shear_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_shear() instead.
drawable_ID |
The affected drawable. |
|
shear_type |
Type of shear. |
|
magnitude |
The magnitude of the shear. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_2d (gint32 drawable_ID,gdouble source_x,gdouble source_y,gdouble scale_x,gdouble scale_y,gdouble angle,gdouble dest_x,gdouble dest_y,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,GimpTransformResize clip_result);
gimp_drawable_transform_2d is deprecated and should not be used in newly-written code.
Use gimp_item_transform_2d() instead.
drawable_ID |
The affected drawable. |
|
source_x |
X coordinate of the transformation center. |
|
source_y |
Y coordinate of the transformation center. |
|
scale_x |
Amount to scale in x direction. |
|
scale_y |
Amount to scale in y direction. |
|
angle |
The angle of rotation (radians). |
|
dest_x |
X coordinate of where the center goes. |
|
dest_y |
Y coordinate of where the center goes. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_2d_default (gint32 drawable_ID,gdouble source_x,gdouble source_y,gdouble scale_x,gdouble scale_y,gdouble angle,gdouble dest_x,gdouble dest_y,gboolean interpolate,GimpTransformResize clip_result);
gimp_drawable_transform_2d_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_2d() instead.
drawable_ID |
The affected drawable. |
|
source_x |
X coordinate of the transformation center. |
|
source_y |
Y coordinate of the transformation center. |
|
scale_x |
Amount to scale in x direction. |
|
scale_y |
Amount to scale in y direction. |
|
angle |
The angle of rotation (radians). |
|
dest_x |
X coordinate of where the center goes. |
|
dest_y |
Y coordinate of where the center goes. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_matrix (gint32 drawable_ID,gdouble coeff_0_0,gdouble coeff_0_1,gdouble coeff_0_2,gdouble coeff_1_0,gdouble coeff_1_1,gdouble coeff_1_2,gdouble coeff_2_0,gdouble coeff_2_1,gdouble coeff_2_2,GimpTransformDirection transform_direction,GimpInterpolationType interpolation,gboolean supersample,gint recursion_level,GimpTransformResize clip_result);
gimp_drawable_transform_matrix is deprecated and should not be used in newly-written code.
Use gimp_item_transform_matrix() instead.
drawable_ID |
The affected drawable. |
|
coeff_0_0 |
coefficient (0,0) of the transformation matrix. |
|
coeff_0_1 |
coefficient (0,1) of the transformation matrix. |
|
coeff_0_2 |
coefficient (0,2) of the transformation matrix. |
|
coeff_1_0 |
coefficient (1,0) of the transformation matrix. |
|
coeff_1_1 |
coefficient (1,1) of the transformation matrix. |
|
coeff_1_2 |
coefficient (1,2) of the transformation matrix. |
|
coeff_2_0 |
coefficient (2,0) of the transformation matrix. |
|
coeff_2_1 |
coefficient (2,1) of the transformation matrix. |
|
coeff_2_2 |
coefficient (2,2) of the transformation matrix. |
|
transform_direction |
Direction of transformation. |
|
interpolation |
Type of interpolation. |
|
supersample |
This parameter is ignored, supersampling is performed based on the interpolation type. |
|
recursion_level |
Maximum recursion level used for supersampling (3 is a nice value). |
|
clip_result |
How to clip results. |
Since GIMP 2.2
gint32 gimp_drawable_transform_matrix_default (gint32 drawable_ID,gdouble coeff_0_0,gdouble coeff_0_1,gdouble coeff_0_2,gdouble coeff_1_0,gdouble coeff_1_1,gdouble coeff_1_2,gdouble coeff_2_0,gdouble coeff_2_1,gdouble coeff_2_2,gboolean interpolate,GimpTransformResize clip_result);
gimp_drawable_transform_matrix_default is deprecated and should not be used in newly-written code.
Use gimp_item_transform_matrix() instead.
drawable_ID |
The affected drawable. |
|
coeff_0_0 |
coefficient (0,0) of the transformation matrix. |
|
coeff_0_1 |
coefficient (0,1) of the transformation matrix. |
|
coeff_0_2 |
coefficient (0,2) of the transformation matrix. |
|
coeff_1_0 |
coefficient (1,0) of the transformation matrix. |
|
coeff_1_1 |
coefficient (1,1) of the transformation matrix. |
|
coeff_1_2 |
coefficient (1,2) of the transformation matrix. |
|
coeff_2_0 |
coefficient (2,0) of the transformation matrix. |
|
coeff_2_1 |
coefficient (2,1) of the transformation matrix. |
|
coeff_2_2 |
coefficient (2,2) of the transformation matrix. |
|
interpolate |
Whether to use interpolation and supersampling. |
|
clip_result |
How to clip results. |
Since GIMP 2.2