ChangeSet 1.1504.2.33, 2003/12/11 11:51:43-08:00, stephane.galles@free.fr [PATCH] USB storage: patch for Kyocera S5 camera I've seen some entries in 2.4.22 and 2.6.0 unusual_devs.h for Kyocera Finecam S3 et S4 cameras and I own a Finecam S5 that does not work out of the box either (here is the beast : http://www.yashica.com/digital/finecams5/finecams5.html) so I found the unusual_devs.h entry and submitted it some month ago at http://www.qbik.ch/usb/devices/showdev.php?id=1626 for the 2.4 kernels I thought It would be nice to have the whole Finecam family in Unusual_devs.h for 2.6.0 The patch for the 2.6.0-test9 is attached with this mail It differs from the entry I submitted at www.qbik.ch as I used the new SC/PR_DEVICE flags and got rid of the IGNORE_SER flag from 2.4 Do you want a patch for 2.4 too ? If so, I should test my old 2.4 entry with the lastest 2.4 Kernels, coz on a daily basis I use a 2.4.20, which is rather old. Moreover, I could used the SC/PR_DEVICE flags too for 2.4.22 (keeping the IGNORE_SER flag though) By the way, several entries with the running patch : /proc/bus/usb/devices : T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0482 ProdID=0103 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 files changed, 6 insertions(+) diff -Nru a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h --- a/drivers/usb/storage/unusual_devs.h Mon Dec 29 14:23:19 2003 +++ b/drivers/usb/storage/unusual_devs.h Mon Dec 29 14:23:19 2003 @@ -102,6 +102,12 @@ "Finecam S4", US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY), +/* Patch submitted by Stephane Galles */ +UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, + "Kyocera", + "Finecam S5", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), + /* Reported by Paul Stewart * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,